| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: prevent race between disconnect() and rtx
Sashiko noted that the two event can race, leading to inconsistent
status. Prevent the race using the synchronous timer stop operation. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying. |
| Use after free in Windows Management Instrumentation allows an authorized attacker to elevate privileges over a network. |
| In openLogicalChannel of multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In checkUiccListenConfigNeeded of RoutingManager.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In AppendCommentLine of AnnotationProcessor.cpp, there is a possible supply chain risk due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service).
Users are recommended to upgrade to version 3.2.4, which fixes this issue. |
| The OpenStation — Desktop Windows, Dock & Virtual Desktops for WP Admin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.1.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to read the title, status, date, permalink, and a 300-character content excerpt of any private, draft, pending, or future post, as well as the content and AI-moderation verdicts of unapproved and spam comments. Any authenticated user with the 'read' capability can self-enable the required AI feature by visiting the /openstation/ portal and toggling their own ai.enabled setting via the POST /desktop-mode/v1/os-settings endpoint, removing any practical barrier to exploitation. |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'jfb_xss' (URL Query Variable) Parameter via Calculated Field in all versions up to, and including, 3.6.5.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires the targeted page to host a form configured with both a URL Query Variable preset field and a Calculated Field that references it, which are standard plugin features. |
| The Gutenverse – WordPress Blocks, Page Builder & Site Editor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Post Comment Block 'suffixMain' Attribute in all versions up to, and including, 4.0.8 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core wp_kses_post sanitization does not mitigate this vulnerability because the payload is stored inside a Gutenberg block delimiter comment rather than as a raw HTML tag, and is only rendered as exploitable HTML at the PHP render stage. |
| EAP's Artemis deserialization configuration permits deserialization by default. ObjectMessage.getObject() uses ObjectInputStreamWithClassLoader, which implements allow-list/block-list filtering via its checkSecurity()/isTrustedType() method. However, by default both allow-list and block-list are empty. When the allow-list is empty (size == 0), isTrustedType() returns true for ALL classes. This means all classes are deserializable by default. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: hantro: bound G2 HEVC tile loop to the buffer capacity
prepare_tile_info_buffer() writes one entry per tile into the tile_sizes
DMA buffer, sized for a grid equal to the PPS uAPI array capacity. Use the
bounded v4l2_hevc_pps_num_tile_columns() / v4l2_hevc_pps_num_tile_rows()
helpers so the loops stay inside the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: fix RCU list diversion in ip6_mc_del1_src()
When removing a source filter whose count reaches zero, ip6_mc_del1_src()
unlinks psf from pmc->mca_sources. If the filter was previously active,
the code moved psf directly into pmc->mca_tomb by updating psf->sf_next.
Because pmc->mca_sources is traversed locklessly under RCU (e.g. by
ipv6_chk_mcast_addr()), mutating psf->sf_next before a grace period
elapses diverts concurrent readers to the tombstone list. Consequently,
readers miss remaining active sources in pmc->mca_sources and improperly
examine deleted tombstone entries.
Fix this by allocating a new tombstone node for pmc->mca_tomb (as done
in sf_setstate()) and retiring the original psf via kfree_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix readahead synchronisation issues by loading all folios upfront
There are some synchronisation issues that derive from the app thread
adding more folios to the rolling buffer whilst the collector thread is
looking at them or trying to clear them, such as determining the setting of
front_folio_order when the next folio hasn't been added yet,
The reason for the rolling buffer approach is that loading the buffer
upfront and then dropping all the refs just acquired is quite a slow
operation, and loading progressively allows some of the cost to be deferred
until after at least some of the I/O is started.
Instead, a better way is to load all the folios into the rolling buffer
upfront - and then drop the refs later, once the I/O is in progress. (Even
better would be for the refs not to be there at all.)
Fix this by changing the rolling buffer loader to load all the folios
selected by the VM for readahead upfront into the folio queue. The folio
queue is allocated a batch worth at a time as we don't know how many folios
are involved (the readahead_control struct, alas, has a page count, not a
folio count).
The folio refs acquired from readahead are then dropped in bulk once the
first subrequest is dispatched as it's quite a slow operation. The
collector waits for NETFS_RREQ_NEED_PUT_RA_REFS to be cleared so that it
doesn't unlock folios before the xarray has been scanned for them.
This simplifies the buffer handling later and isn't noticeably slower as
the xarray doesn't need to be modified and the folios are all already
pre-locked. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: don't downgrade half-dead scalar zero spills to STACK_ZERO
states.c:__clean_func_state() can downgrade scalar zero spill to
STACK_ZERO in the following case:
*(u64 *)(r10 - 8) = 0;
... checkpoint ...
r1 = *(u32 *)(r10 - 4);
... no reads from r10-8 ...
Here 4 bytes at r10-8 are dead and verifier changes scalar spill to a
combination: 0000pppp (p stands for poison). Such a change breaks
precision propagation chains. All places that produce STACK_ZERO
should call bpf_mark_chain_precision() for the zero source.
This patch fixes the bug in a simplest way possible:
avoids converting stack spills of zero to STACK_ZERO.
Two smarter approaches are possible:
- do bpf_mark_chain_precision() from __clean_func_state()
- check slot liveness information in check_stack_write_fixed_off()
I investigated both and the changes required are a bit tricky,
hence go with a simple fix for the time being. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound $AttrDef table walk to the loaded table size
ntfs_attr_find_in_attrdef() walks the in-memory $AttrDef table, but the
loop condition bounds only the start of each entry, not the whole entry:
for (ad = vol->attrdef; (u8 *)ad - (u8 *)vol->attrdef <
vol->attrdef_size && ad->type; ++ad)
struct attr_def is 160 bytes; the guard reads ad->type at offset 128 and
the loop body reads further fields. vol->attrdef is kvzalloc(i_size),
where i_size is the on-disk $AttrDef data size, checked in
load_and_init_attrdef() only as 0 < i_size <= 0x7fffffff. A volume whose
$AttrDef data size is smaller than one entry (e.g. 120 bytes) makes the
read of ad->type run past the allocation. Creating a file reaches this
through ntfs_attr_size_bounds_check() and reads out of bounds:
BUG: KASAN: slab-out-of-bounds in ntfs_attr_find_in_attrdef+0x66/0xa0
Read of size 4 at addr ffff888005833280 by task init/1
ntfs_attr_find_in_attrdef
ntfs_attr_size_bounds_check
ntfs_attr_can_be_non_resident
ntfs_attr_add
Require the whole entry to lie within attrdef_size in the loop guard, and
reject at mount a $AttrDef too small to hold one attr_def entry. |
