| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
devm_kasprintf() may return NULL on memory allocation failure,
but the debug message prints cpus->dai_name before checking it.
Move the dev_dbg() call after the NULL check to prevent potential
NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe()
The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which
would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check
that the pointer is valid. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/i10nm: Skip DIMM enumeration on a disabled memory controller
When loading the i10nm_edac driver on some Intel Granite Rapids servers,
a call trace may appear as follows:
UBSAN: shift-out-of-bounds in drivers/edac/skx_common.c:453:16
shift exponent -66 is negative
...
__ubsan_handle_shift_out_of_bounds+0x1e3/0x390
skx_get_dimm_info.cold+0x47/0xd40 [skx_edac_common]
i10nm_get_dimm_config+0x23e/0x390 [i10nm_edac]
skx_register_mci+0x159/0x220 [skx_edac_common]
i10nm_init+0xcb0/0x1ff0 [i10nm_edac]
...
This occurs because some BIOS may disable a memory controller if there
aren't any memory DIMMs populated on this memory controller. The DIMMMTR
register of this disabled memory controller contains the invalid value
~0, resulting in the call trace above.
Fix this call trace by skipping DIMM enumeration on a disabled memory
controller. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: cleanup remaining SKBs in PTP flows
When the driver requests Tx timestamp value, one of the first steps is
to clone SKB using skb_get. It increases the reference counter for that
SKB to prevent unexpected freeing by another component.
However, there may be a case where the index is requested, SKB is
assigned and never consumed by PTP flows - for example due to reset during
running PTP apps.
Add a check in release timestamping function to verify if the SKB
assigned to Tx timestamp latch was freed, and release remaining SKBs. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: verify orphan file size is not too big
In principle orphan file can be arbitrarily large. However orphan replay
needs to traverse it all and we also pin all its buffers in memory. Thus
filesystems with absurdly large orphan files can lead to big amounts of
memory consumed. Limit orphan file size to a sane value and also use
kvmalloc() for allocating array of block descriptor structures to avoid
large order allocations for sane but large orphan files. |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: prevent deadlock by moving j1939_sk_errqueue()
This commit addresses a deadlock situation that can occur in certain
scenarios, such as when running data TP/ETP transfer and subscribing to
the error queue while receiving a net down event. The deadlock involves
locks in the following order:
3
j1939_session_list_lock -> active_session_list_lock
j1939_session_activate
...
j1939_sk_queue_activate_next -> sk_session_queue_lock
...
j1939_xtp_rx_eoma_one
2
j1939_sk_queue_drop_all -> sk_session_queue_lock
...
j1939_sk_netdev_event_netdown -> j1939_socks_lock
j1939_netdev_notify
1
j1939_sk_errqueue -> j1939_socks_lock
__j1939_session_cancel -> active_session_list_lock
j1939_tp_rxtimer
CPU0 CPU1
---- ----
lock(&priv->active_session_list_lock);
lock(&jsk->sk_session_queue_lock);
lock(&priv->active_session_list_lock);
lock(&priv->j1939_socks_lock);
The solution implemented in this commit is to move the
j1939_sk_errqueue() call out of the active_session_list_lock context,
thus preventing the deadlock situation. |
| In the Linux kernel, the following vulnerability has been resolved:
pid: Add a judgment for ns null in pid_nr_ns
__task_pid_nr_ns
ns = task_active_pid_ns(current);
pid_nr_ns(rcu_dereference(*task_pid_ptr(task, type)), ns);
if (pid && ns->level <= pid->level) {
Sometimes null is returned for task_active_pid_ns. Then it will trigger kernel panic in pid_nr_ns.
For example:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058
Mem abort info:
ESR = 0x0000000096000007
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x07: level 3 translation fault
Data abort info:
ISV = 0, ISS = 0x00000007, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 39-bit VAs, pgdp=00000002175aa000
[0000000000000058] pgd=08000002175ab003, p4d=08000002175ab003, pud=08000002175ab003, pmd=08000002175be003, pte=0000000000000000
pstate: 834000c5 (Nzcv daIF +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : __task_pid_nr_ns+0x74/0xd0
lr : __task_pid_nr_ns+0x24/0xd0
sp : ffffffc08001bd10
x29: ffffffc08001bd10 x28: ffffffd4422b2000 x27: 0000000000000001
x26: ffffffd442821168 x25: ffffffd442821000 x24: 00000f89492eab31
x23: 00000000000000c0 x22: ffffff806f5693c0 x21: ffffff806f5693c0
x20: 0000000000000001 x19: 0000000000000000 x18: 0000000000000000
x17: 00000000529c6ef0 x16: 00000000529c6ef0 x15: 00000000023a1adc
x14: 0000000000000003 x13: 00000000007ef6d8 x12: 001167c391c78800
x11: 00ffffffffffffff x10: 0000000000000000 x9 : 0000000000000001
x8 : ffffff80816fa3c0 x7 : 0000000000000000 x6 : 49534d702d535449
x5 : ffffffc080c4c2c0 x4 : ffffffd43ee128c8 x3 : ffffffd43ee124dc
x2 : 0000000000000000 x1 : 0000000000000001 x0 : ffffff806f5693c0
Call trace:
__task_pid_nr_ns+0x74/0xd0
...
__handle_irq_event_percpu+0xd4/0x284
handle_irq_event+0x48/0xb0
handle_fasteoi_irq+0x160/0x2d8
generic_handle_domain_irq+0x44/0x60
gic_handle_irq+0x4c/0x114
call_on_irq_stack+0x3c/0x74
do_interrupt_handler+0x4c/0x84
el1_interrupt+0x34/0x58
el1h_64_irq_handler+0x18/0x24
el1h_64_irq+0x68/0x6c
account_kernel_stack+0x60/0x144
exit_task_stack_account+0x1c/0x80
do_exit+0x7e4/0xaf8
...
get_signal+0x7bc/0x8d8
do_notify_resume+0x128/0x828
el0_svc+0x6c/0x70
el0t_64_sync_handler+0x68/0xbc
el0t_64_sync+0x1a8/0x1ac
Code: 35fffe54 911a02a8 f9400108 b4000128 (b9405a69)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
x86/kvm: Force legacy PCI hole to UC when overriding MTRRs for TDX/SNP
When running as an SNP or TDX guest under KVM, force the legacy PCI hole,
i.e. memory between Top of Lower Usable DRAM and 4GiB, to be mapped as UC
via a forced variable MTRR range.
In most KVM-based setups, legacy devices such as the HPET and TPM are
enumerated via ACPI. ACPI enumeration includes a Memory32Fixed entry, and
optionally a SystemMemory descriptor for an OperationRegion, e.g. if the
device needs to be accessed via a Control Method.
If a SystemMemory entry is present, then the kernel's ACPI driver will
auto-ioremap the region so that it can be accessed at will. However, the
ACPI spec doesn't provide a way to enumerate the memory type of
SystemMemory regions, i.e. there's no way to tell software that a region
must be mapped as UC vs. WB, etc. As a result, Linux's ACPI driver always
maps SystemMemory regions using ioremap_cache(), i.e. as WB on x86.
The dedicated device drivers however, e.g. the HPET driver and TPM driver,
want to map their associated memory as UC or WC, as accessing PCI devices
using WB is unsupported.
On bare metal and non-CoCO, the conflicting requirements "work" as firmware
configures the PCI hole (and other device memory) to be UC in the MTRRs.
So even though the ACPI mappings request WB, they are forced to UC- in the
kernel's tracking due to the kernel properly handling the MTRR overrides,
and thus are compatible with the drivers' requested WC/UC-.
With force WB MTRRs on SNP and TDX guests, the ACPI mappings get their
requested WB if the ACPI mappings are established before the dedicated
driver code attempts to initialize the device. E.g. if acpi_init()
runs before the corresponding device driver is probed, ACPI's WB mapping
will "win", and result in the driver's ioremap() failing because the
existing WB mapping isn't compatible with the requested WC/UC-.
E.g. when a TPM is emulated by the hypervisor (ignoring the security
implications of relying on what is allegedly an untrusted entity to store
measurements), the TPM driver will request UC and fail:
[ 1.730459] ioremap error for 0xfed40000-0xfed45000, requested 0x2, got 0x0
[ 1.732780] tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -12
Note, the '0x2' and '0x0' values refer to "enum page_cache_mode", not x86's
memtypes (which frustratingly are an almost pure inversion; 2 == WB, 0 == UC).
E.g. tracing mapping requests for TPM TIS yields:
Mapping TPM TIS with req_type = 0
WARNING: CPU: 22 PID: 1 at arch/x86/mm/pat/memtype.c:530 memtype_reserve+0x2ab/0x460
Modules linked in:
CPU: 22 UID: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.16.0-rc7+ #2 VOLUNTARY
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/29/2025
RIP: 0010:memtype_reserve+0x2ab/0x460
__ioremap_caller+0x16d/0x3d0
ioremap_cache+0x17/0x30
x86_acpi_os_ioremap+0xe/0x20
acpi_os_map_iomem+0x1f3/0x240
acpi_os_map_memory+0xe/0x20
acpi_ex_system_memory_space_handler+0x273/0x440
acpi_ev_address_space_dispatch+0x176/0x4c0
acpi_ex_access_region+0x2ad/0x530
acpi_ex_field_datum_io+0xa2/0x4f0
acpi_ex_extract_from_field+0x296/0x3e0
acpi_ex_read_data_from_field+0xd1/0x460
acpi_ex_resolve_node_to_value+0x2ee/0x530
acpi_ex_resolve_to_value+0x1f2/0x540
acpi_ds_evaluate_name_path+0x11b/0x190
acpi_ds_exec_end_op+0x456/0x960
acpi_ps_parse_loop+0x27a/0xa50
acpi_ps_parse_aml+0x226/0x600
acpi_ps_execute_method+0x172/0x3e0
acpi_ns_evaluate+0x175/0x5f0
acpi_evaluate_object+0x213/0x490
acpi_evaluate_integer+0x6d/0x140
acpi_bus_get_status+0x93/0x150
acpi_add_single_object+0x43a/0x7c0
acpi_bus_check_add+0x149/0x3a0
acpi_bus_check_add_1+0x16/0x30
acpi_ns_walk_namespace+0x22c/0x360
acpi_walk_namespace+0x15c/0x170
acpi_bus_scan+0x1dd/0x200
acpi_scan_init+0xe5/0x2b0
acpi_init+0x264/0x5b0
do_one_i
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ice_adapter: release xa entry on adapter allocation failure
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store) |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom
Syzbot reported read of uninitialized variable BUG with following call stack.
lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout
=====================================================
BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707
Local variable sig.i.i created at:
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM
read timeout errors (-ETIMEDOUT). In the fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error.
As a result, callers could mistakenly treat the data buffer as valid
even though the EEPROM read had actually timed out with no data or partial
data.
To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM timeout error correctly
to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
kfd_lookup_process_by_pid hold the kfd process reference to ensure it
doesn't get destroyed while sending the segfault event to user space.
Calling kfd_lookup_process_by_pid as function parameter leaks the kfd
process refcount and miss the NULL pointer check if app process is
already destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: intel_pstate: Fix object lifecycle issue in update_qos_request()
The cpufreq_cpu_put() call in update_qos_request() takes place too early
because the latter subsequently calls freq_qos_update_request() that
indirectly accesses the policy object in question through the QoS request
object passed to it.
Fortunately, update_qos_request() is called under intel_pstate_driver_lock,
so this issue does not matter for changing the intel_pstate operation
mode, but it theoretically can cause a crash to occur on CPU device hot
removal (which currently can only happen in virt, but it is formally
supported nevertheless).
Address this issue by modifying update_qos_request() to drop the
reference to the policy later. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix target_cmd_counter leak
The target_cmd_counter struct allocated via target_alloc_cmd_counter() is
never freed, resulting in leaks across various transport types, e.g.:
unreferenced object 0xffff88801f920120 (size 96):
comm "sh", pid 102, jiffies 4294892535 (age 713.412s)
hex dump (first 32 bytes):
07 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 38 01 92 1f 80 88 ff ff ........8.......
backtrace:
[<00000000e58a6252>] kmalloc_trace+0x11/0x20
[<0000000043af4b2f>] target_alloc_cmd_counter+0x17/0x90 [target_core_mod]
[<000000007da2dfa7>] target_setup_session+0x2d/0x140 [target_core_mod]
[<0000000068feef86>] tcm_loop_tpg_nexus_store+0x19b/0x350 [tcm_loop]
[<000000006a80e021>] configfs_write_iter+0xb1/0x120
[<00000000e9f4d860>] vfs_write+0x2e4/0x3c0
[<000000008143433b>] ksys_write+0x80/0xb0
[<00000000a7df29b2>] do_syscall_64+0x42/0x90
[<0000000053f45fb8>] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Free the structure alongside the corresponding iscsit_conn / se_sess
parent. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-subdev: Fix alloc failure check in v4l2_subdev_call_state_try()
v4l2_subdev_call_state_try() macro allocates a subdev state with
__v4l2_subdev_state_alloc(), but does not check the returned value. If
__v4l2_subdev_state_alloc fails, it returns an ERR_PTR, and that would
cause v4l2_subdev_call_state_try() to crash.
Add proper error handling to v4l2_subdev_call_state_try(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: fix module removal if firmware download failed
Fix remove if firmware failed to load:
qcom-iris aa00000.video-codec: Direct firmware load for qcom/vpu/vpu33_p4.mbn failed with error -2
qcom-iris aa00000.video-codec: firmware download failed
qcom-iris aa00000.video-codec: core init failed
then:
$ echo aa00000.video-codec > /sys/bus/platform/drivers/qcom-iris/unbind
Triggers:
genpd genpd:1:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
video_cc_mvs0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#1: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
video_cc_mvs0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#2: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu_power_off_hw+0x48/0x58 [qcom_iris]
iris_vpu33_power_off_hardware+0x44/0x230 [qcom_iris]
iris_vpu_power_off+0x34/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
genpd genpd:0:aa00000.video-codec: Runtime PM usage count underflow!
------------[ cut here ]------------
gcc_video_axi0_clk already disabled
WARNING: drivers/clk/clk.c:1206 at clk_core_disable+0xa4/0xac, CPU#4: sh/542
<snip>
pc : clk_core_disable+0xa4/0xac
lr : clk_core_disable+0xa4/0xac
<snip>
Call trace:
clk_core_disable+0xa4/0xac (P)
clk_disable+0x30/0x4c
iris_disable_unprepare_clock+0x20/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
------------[ cut here ]------------
gcc_video_axi0_clk already unprepared
WARNING: drivers/clk/clk.c:1065 at clk_core_unprepare+0xf0/0x110, CPU#4: sh/542
<snip>
pc : clk_core_unprepare+0xf0/0x110
lr : clk_core_unprepare+0xf0/0x110
<snip>
Call trace:
clk_core_unprepare+0xf0/0x110 (P)
clk_unprepare+0x2c/0x44
iris_disable_unprepare_clock+0x28/0x48 [qcom_iris]
iris_vpu33_power_off_controller+0x17c/0x428 [qcom_iris]
iris_vpu_power_off+0x48/0x84 [qcom_iris]
iris_core_deinit+0x44/0xc8 [qcom_iris]
iris_remove+0x20/0x48 [qcom_iris]
platform_remove+0x20/0x30
device_remove+0x4c/0x80
<snip>
---[ end trace 0000000000000000 ]---
Skip deinit if initialization never succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vmem: split pages when debug pagealloc is enabled
Since commit bb1520d581a3 ("s390/mm: start kernel with DAT enabled")
the kernel crashes early during boot when debug pagealloc is enabled:
mem auto-init: stack:off, heap alloc:off, heap free:off
addressing exception: 0005 ilc:2 [#1] SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-09759-gc5666c912155 #630
[..]
Krnl Code: 00000000001325f6: ec5600248064 cgrj %r5,%r6,8,000000000013263e
00000000001325fc: eb880002000c srlg %r8,%r8,2
#0000000000132602: b2210051 ipte %r5,%r1,%r0,0
>0000000000132606: b90400d1 lgr %r13,%r1
000000000013260a: 41605008 la %r6,8(%r5)
000000000013260e: a7db1000 aghi %r13,4096
0000000000132612: b221006d ipte %r6,%r13,%r0,0
0000000000132616: e3d0d0000171 lay %r13,4096(%r13)
Call Trace:
__kernel_map_pages+0x14e/0x320
__free_pages_ok+0x23a/0x5a8)
free_low_memory_core_early+0x214/0x2c8
memblock_free_all+0x28/0x58
mem_init+0xb6/0x228
mm_core_init+0xb6/0x3b0
start_kernel+0x1d2/0x5a8
startup_continue+0x36/0x40
Kernel panic - not syncing: Fatal exception: panic_on_oops
This is caused by using large mappings on machines with EDAT1/EDAT2. Add
the code to split the mappings into 4k pages if debug pagealloc is enabled
by CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT or the debug_pagealloc kernel
command line option. |
| In the Linux kernel, the following vulnerability has been resolved:
media: tuners: qt1010: replace BUG_ON with a regular error
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: do not repeat pte_offset_map_lock() until success
DAMON's virtual address space operation set implementation (vaddr) calls
pte_offset_map_lock() inside the page table walk callback function. This
is for reading and writing page table accessed bits. If
pte_offset_map_lock() fails, it retries by returning the page table walk
callback function with ACTION_AGAIN.
pte_offset_map_lock() can continuously fail if the target is a pmd
migration entry, though. Hence it could cause an infinite page table walk
if the migration cannot be done until the page table walk is finished.
This indeed caused a soft lockup when CPU hotplugging and DAMON were
running in parallel.
Avoid the infinite loop by simply not retrying the page table walk. DAMON
is promising only a best-effort accuracy, so missing access to such pages
is no problem. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: zero unused hash fields
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: Fix irq assumption regression
The code in bmc150-accel-core.c unconditionally calls
bmc150_accel_set_interrupt() in the iio_buffer_setup_ops,
such as on the runtime PM resume path giving a kernel
splat like this if the device has no interrupts:
Unable to handle kernel NULL pointer dereference at virtual
address 00000001 when read
PC is at bmc150_accel_set_interrupt+0x98/0x194
LR is at __pm_runtime_resume+0x5c/0x64
(...)
Call trace:
bmc150_accel_set_interrupt from bmc150_accel_buffer_postenable+0x40/0x108
bmc150_accel_buffer_postenable from __iio_update_buffers+0xbe0/0xcbc
__iio_update_buffers from enable_store+0x84/0xc8
enable_store from kernfs_fop_write_iter+0x154/0x1b4
This bug seems to have been in the driver since the beginning,
but it only manifests recently, I do not know why.
Store the IRQ number in the state struct, as this is a common
pattern in other drivers, then use this to determine if we have
IRQ support or not. |
