| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mvm: fix off-by-one in TXF key sanitiser
iwl_mvm_frob_txf_key_iter() tracks the last matched byte position
in loop variable 'i'. When a full key match is found (match ==
keylen), 'i' points at the last byte of the matched key. The
memset start offset should therefore be i + 1 - keylen, not
i - keylen; the current code zeroes one byte before the match
and leaves the final key byte un-sanitised. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: check SAP message length before reading it
Verify the SAP message size is not larger than the local buffer before
reading the message to avoid buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: guard against division by zero in iwl_dbg_tlv_alloc_fragments
Make sure we don't end-up with a num_frags = 0 situation.
For that, check that the required size is not 0 and put a checker on
num_frags as well. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Avoid stack over-read in debug output helpers
host1x_debug_output() and host1x_debug_cont() used vsnprintf(), which
returns the length the formatted string would have reached with an
unbounded buffer. That return value was passed straight to o->fn as
the number of bytes to emit.
This could cause a read past end of the output buffer if a call to
host1x_debug_* produced a string longer than 256 bytes. This only
affected the debugfs files as the printk debug sink ignores the
number of bytes. In practice, this is very unlikely to occur.
Fix by switching to vscnprintf(), which returns the number of bytes
actually written. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: fix use after free on error path in a6xx_gpu_init()
The a6xx_destroy() function frees "a6xx_gpu" and so "adreno_gpu" points
to freed memory. Preserve the error code before freeing the memory to
avoid a use after free.
Patchwork: https://patchwork.freedesktop.org/patch/732275/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix task_struct reference leak in recover_worker
get_pid_task() increments the task reference count, but the
corresponding put_task_struct() was missing in the else branch,
leaking a reference on every GPU hang recovery.
Patchwork: https://patchwork.freedesktop.org/patch/730662/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Only fini scheduler after successful init
msm_ringbuffer_new() destroys a partially initialized ring through
msm_ringbuffer_destroy() when an allocation or scheduler setup step
fails.
If drm_sched_init() fails before it finishes initializing the scheduler,
the failure path still calls drm_sched_fini(). That teardown path assumes
the scheduler work items, lists, and workqueue state were initialized.
Track successful scheduler initialization and call drm_sched_fini() only
after drm_sched_init() returned 0.
This issue was found by a static analysis checker and confirmed by
manual source review.
Patchwork: https://patchwork.freedesktop.org/patch/738905/ |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context
TX EQTR may run while devfreq gear scaling has quiesced the UFS
tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr()
and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct
reclaim is triggered, reclaim/writeback can depend on I/O to UFS
device. Because the queue is quiesced, this can cause deadlock.
Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all
allocations in the TX EQTR call tree, including:
- params->eqtr_record in ufshcd_tx_eqtr()
- eqtr_data in __ufshcd_tx_eqtr()
- params in ufs_qcom_get_rx_fom()
This is preferred over tagging individual call sites with GFP_NOIO, as it
automatically covers any future allocations added anywhere in the call tree
without requiring each caller to be aware of this constraint.
[mkp: fix label as suggested by Bart] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: remove broken string configfs attributes
The UAC1_STR_ATTRIBUTE macro defines configfs show/store handlers for
the fn_play, fn_cap, and fn_cntl string options. The store function
contains an inverted null check on the kstrndup() return value.
This means every write attempt returns -ENOMEM on success and
dereferences a NULL pointer on allocation failure. The attributes
have been broken and unused for many years.
Remove the UAC1_STR_ATTRIBUTE macro and the three attributes it
generated. The internal defaults (FILE_PCM_PLAYBACK, FILE_PCM_CAPTURE,
FILE_CONTROL) set in f_audio_alloc_inst() are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
UDF symlink pathComponent header OOB read
udf_symlink_filler() can enter udf_pc_to_char() with a partial pathComponent header.
Validate that enough input remains for a complete pathComponent header
before accessing it. Reject malformed symlink data that would otherwise
make udf_pc_to_char() perform an out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
uio: Fix stale info pointer in failed registration path
After device_add(), the UIO device is visible to userspace and /dev/uioX
can be opened. If a later setup step fails, __uio_register_device()
unwinds the device but leaves idev->info pointing at the caller-owned
struct uio_info.
That is unsafe when an opener races with the failed registration path.
The open file keeps a reference to the uio_device, while the caller sees
registration failure and may free its struct uio_info. Later file
operations can then follow idev->info and dereference freed memory.
Handle post-device_add() failures like unregister: remove UIO attributes
while the info pointer is still valid, then clear idev->info under
info_lock and wake existing waiters/async users before removing the
device and minor. This makes already-open file descriptors observe the
same "device gone" state as normal uio_unregister_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
speakup: keyhelp: guard letter_offsets possible out-of-range indexing
help_init() builds letter_offsets[] by using the first byte of each
function name as an index via `(start & 31) - 1`. If function_names are
overridden from sysfs (root) with a name starting outside [a–z], the
index underflows or exceeds the array, leading to OOB write.
Function names can be overridden with the following commands as root:
modprobe speakup_soft
echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names
# then press Insert+2 on /dev/tty
This fix checks the first letter in help_init(), and if it is not in the
[a–z] range the function returns an error to the caller. Eventually this
error is propagated to drivers/accessibility/speakup/main.c:2217, which
causes a bleep sound. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: ad525x_dpot: use driver core groups for sysfs files
ad_dpot_probe() creates per-RDAC sysfs files manually and then
optionally creates the command sysfs group. This leaves probe responsible
for rolling back partial sysfs state and makes remove responsible for
matching every file that probe created.
Move the device attributes into driver core dev_groups for the I2C and
SPI drivers and use an is_visible() callback to expose only the
attributes supported by the probed device. With this shape, the driver
core creates the sysfs files only after probe succeeds and removes them
before the remove callback frees the driver data. |
| In the Linux kernel, the following vulnerability has been resolved:
ipack: ipoctal: fix UAF, null-ptr-deref, and use-after-free in cleanup on remove
Three issues arise when the device is removed while a tty session is
still active:
1. UAF of struct ipoctal: the remove callback frees ipoctal via
kfree() while tty ops may still access it. Fix by introducing
kref-based lifetime management — kref is taken in install() when
a tty is opened and released in cleanup() when the tty is finally
destroyed; remove() uses kref_put() instead of kfree().
2. NULL dereference in ipoctal_write_tty(): __ipoctal_remove()
frees xmit_buf via tty_port_free_xmit_buf() while a userspace
process may still hold the tty fd and call write(). Fix by
checking for NULL xmit_buf in ipoctal_write_tty().
3. UAF in ipoctal_cleanup(): ipack_put_carrier(ipoctal->dev)
dereferences ipoctal->dev after the ipack_device has been freed
by ipack_device_del(). Fix by caching ipoctal->carrier_owner
during probe() and calling module_put() on the cached pointer
directly in cleanup(), avoiding any access to ipoctal->dev.
Also introduce a "removed" flag in struct ipoctal, set at the start
of __ipoctal_remove(), and checked in every tty op that accesses
hardware resources (port_activate, write_tty, set_termios, hangup,
shutdown). This prevents page faults when devm_ioremap() regions
are unmapped after remove() returns. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: mtdswap: Avoid freeing registered blktrans device twice
In mtdswap_add_mtd(), debugfs setup failure after successful blktrans
registration can free mbd_dev twice.
add_mtd_blktrans_dev() initializes the blktrans device reference and
publishes the disk. Once that succeeds, del_mtd_blktrans_dev() tears the
disk down and drops the blktrans reference; when that reference reaches
zero, blktrans_dev_release() frees the mtd_blktrans_dev.
The debugfs failure path called del_mtd_blktrans_dev(mbd_dev), then fell
through the common cleanup label and called kfree(mbd_dev) again. Clear
the local pointer after deregistration so the common cleanup can still
release the mtdswap state without freeing the blktrans object twice.
This issue was found by a static analysis checker and confirmed by
manual source review. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
software node: Fix software_node_get_reference_args() with index -1
The bounds check for the index passed to
software_node_get_reference_args() was failing when passed UINT_MAX,
this in turn would lead to an out of bound access in the property
array. Fix the bound check to also cover the UINT_MAX case. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
