| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: complete object teardown when the destroy command fails
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every software-owned resource and return
success, since during terminal destruction the hardware command result is
only diagnostic. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix RXDMAD_C buffer recycling race
The RXDMAD_C buffers come from the RRO data queues' page pools, which are
bound to a different NAPI, so the direct page-pool recycle used here could
race the owning NAPI; take the non-direct path as is already done for WED
RX queues. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Check atomic pool allocation result directly
The non-blocking, non-coherent allocation path uses dma_alloc_from_pool(),
which returns the allocated page and fills cpu_addr only on success.
Do not rely on cpu_addr to detect allocation failure in this path. Check
the returned page directly before using it for the IOMMU mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent
memcpy() destination advances by sizeof(full struct) per slot via C
pointer arithmetic, not by the clamped len. When firmware sends short
TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Compile tested only. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix race between policy activation and blkg destruction
When switching an IO scheduler on a block device, blkcg_activate_policy()
allocates blkg_policy_data (pd) for all blkgs attached to the queue.
However, blkcg_activate_policy() may race with concurrent blkcg deletion,
leading to use-after-free and memory leak issues.
The use-after-free occurs in the following race:
T1 (blkcg_activate_policy):
- Successfully allocates pd for blkg1 (loop0->queue, blkcgA)
- Fails to allocate pd for blkg2 (loop0->queue, blkcgB)
- Enters the enomem rollback path to release blkg1 resources
T2 (blkcg deletion):
- blkcgA is deleted concurrently
- blkg1 is freed via blkg_free_workfn()
- blkg1->pd is freed
T1 (continued):
- Rollback path accesses blkg1->pd->online after pd is freed
- Triggers use-after-free
In addition, blkg_free_workfn() frees pd before removing the blkg from
q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd
for a blkg that is being destroyed, leaving the newly allocated pd
unreachable when the blkg is finally freed.
Fix these races by extending blkcg_mutex coverage to serialize
blkcg_activate_policy() rollback and blkg destruction, ensuring pd
lifecycle is synchronized with blkg list visibility. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unlink TWT flow if the MCU rejects the agreement
The flow is added to dev->twt_list before sending the agreement to the
firmware, but the error path leaves it linked while flowid_mask is
never set. The flow slot can then be reused and memset while still on
the list, corrupting twt_list, and station removal leaves a dangling
entry behind that mt7915_mac_twt_sched_list_add() later walks. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, x86: Fix trampoline stack size for 128-bit arguments
btf_distill_func_proto() accepts a function argument up to 16 bytes, so a
128-bit scalar such as __int128 reaches the x86 trampoline with
arg_size == 16. But the current implementation assumes an __int128
argument only needs one register, so the register save area is
under-allocated and save_args() overwrites adjacent stack slots.
Compute the register count from arg_size for all arguments to fix it. |
| Grafana OSS and Grafana Enterprise did not safely resolve symbolic links when
extracting plugin archives. A crafted plugin archive can chain relative symbolic link
entries to escape the plugin installation directory, writing arbitrary files and an
executable backend binary outside that directory. The dropped executable runs with the
privileges of the Grafana server process, resulting in remote code execution.
Plugin archives are extracted before their signature is verified, so a valid plugin
signature does not prevent the write. An operator can therefore be affected by
installing a plugin that appears legitimate, as well as by installing a plugin from an
arbitrary archive using grafana-cli, the GF_INSTALL_PLUGINS environment variable, or
preinstall configuration.
Grafana Enterprise is affected because it includes the same plugin extraction code as
Grafana OSS. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: renesas: rcar-gen2: Fix double of_node_put on phy creation failure
for_each_child_of_node_scoped() releases the node reference on scope
exit, so the explicit of_node_put(np) in the devm_phy_create() error
path drops it twice.
Drop the redundant of_node_put() and let the scoped cleanup handle it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Resize MST HDCP per-connector arrays to 32
AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of
32 connectors. But the way it's used is like MAX_DISPLAY_COUNT.
Hence we're off by one with DRM core, which supports a max of 32
connectors.
Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT
to match its actual use, and increase the size to 32 to match the
originally intended size. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Compare iterator types during state pruning
An iterator stack slot can be MEM_RCU or PTR_UNTRUSTED. These states
must not be equal, or the verifier can prune an unsafe path.
Compare the pointer type for STACK_ITER slots. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: read llcp_sock->local under the socket lock in getsockopt
nfc_llcp_getsockopt() read llcp_sock->local before lock_sock(sk) and
then dereferenced the cached pointer inside the locked region.
llcp_sock_bind() assigns and clears llcp_sock->local under the same
socket lock, dropping the last reference on its error path. A
getsockopt() racing an in-flight bind() can observe the pointer, block
on lock_sock(), and then dereference a freed nfc_llcp_local once bind()
has unwound.
Move the llcp_sock->local read and the NULL check inside the
lock_sock(sk) region so bind() cannot mutate or free the pointer between
the load and the use. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme/ioctl: check SUBMIT_IO with nvme_cmd_allowed()
Unlike IO_CMD / IO64_CMD, NVME_IOCTL_SUBMIT_IO never calls
nvme_cmd_allowed(). Unprivileged callers can thus issue I/O on a
partition device or write through a read-only file descriptor.
Pass flags and open_for_write through and reject disallowed commands
with -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix NULL pointer dereference in nvmet_execute_identify_ns_zns()
When a host issues an Identify command with CNS 05h (I/O Command Set
specific Identify Namespace) and CSI 02h (ZNS) targeting a file-backed
namespace, nvmet_execute_identify_ns_zns() calls bdev_is_zoned() on
req->ns->bdev. A file-backed namespace has no block device, so
req->ns->bdev is NULL and bdev_is_zoned() dereferences it, oopsing.
The I/O command set is selected by the host-supplied CSI field and the
command is routed here whenever CONFIG_BLK_DEV_ZONED is enabled,
independent of the namespace backing type, so any file-backed namespace
is exposed.
Reject the command with Invalid Field when the namespace is not backed
by a block device. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-apple: Destroy the admin queue on removal
The admin queue is allocated with blk_mq_alloc_queue() but never
destroyed. nvme_free_ctrl() only drops the last reference and
blk_mq_exit_queue() and blk_sync_queue() never run: the hctx is never
moved to q->unused_hctx_list and the timeout timer and work stay armed on
a queue that is about to be freed which will eventually oops inside
blk_mq_timeout_work().
This can only be triggered when the controller fails to come up and is
then immediately torn down again which is why no one ever ran into this
before.
Let's just copy what the pcie driver does: unquiesce and destroy the admin
queue before nvme_uninit_ctrl().
With this the following WARN followed by a panic no longer happens:
WARNING: block/blk-mq.c:4390 at blk_mq_release+0x194/0x238, CPU#4: kworker/u34:4/119
CPU: 4 UID: 0 PID: 119 Comm: kworker/u34:4 Not tainted 7.2.0-rc1-dirty #248 PREEMPT
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: nvme-wq apple_nvme_remove_dead_ctrl_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : blk_mq_release+0x194/0x238
lr : blk_mq_release+0x58/0x238
sp : ffffc000833a3b50
x29: ffffc000833a3b50 x28: ffff80001d0450f8 x27: ffff800020c95200
x26: 0000000000000088 x25: 0000000000000000 x24: ffff800020f36805
x23: 0000000000000000 x22: ffffc00081a86878 x21: ffff800020be9c60
x20: 0000000000000000 x19: ffff800022501698 x18: 000000000000000a
x17: 7365757165722066 x16: 666f7265776f7020 x15: 0000000000000000
x14: 0000000000000028 x13: 0000000000004def x12: 0000000000000003
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000805b4fc8
x8 : ffffc00081915820 x7 : ffffc00081c4f3c8 x6 : 0000000000000001
x5 : 0000000000000004 x4 : ffff800022498d80 x3 : ffffc000833a3b14
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800022501698
Call trace:
blk_mq_release+0x194/0x238 (P)
blk_put_queue+0x8c/0xf0
nvme_free_ctrl+0x4c/0x260
device_release+0x44/0x128
kobject_put+0xa0/0x120
put_device+0x1c/0x40
nvme_uninit_ctrl+0x48/0x60
apple_nvme_remove+0x54/0xb0
platform_remove+0x28/0x40
device_remove+0x54/0x98
device_release_driver_internal+
device_release_driver+0x20/0x38
apple_nvme_remove_dead_ctrl_wor
process_one_work+0x1f4/0x770
worker_thread+0x1b8/0x360
kthread+0x140/0x160
ret_from_fork+0x10/0x20
irq event stamp: 448
hardirqs last enabled at (447):in_unlock_irqrestore+0x74/0x80
hardirqs last disabled at (448): [<ffffc000811cf5c0>] el1_brk64+0x20/0x60
softirqs last enabled at (0): [ess+0xb28/0x2698
softirqs last disabled at (0): [<0000000000000000>] 0x0
---[ end trace 0000000000000000
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL),
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagA
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[0000000000000000] user address
Internal error: Oops: 0000000096000005 [#1] SMP
CPU: 7 UID: 0 PID: 54 Comm: kwor 7.2.0-rc1-dirty #248PREEMPT
Tainted: [W]=WARN
Hardware name: Apple Mac mini (M1, 2020) (DT)
Workqueue: kblockd blk_mq_timeou
pstate: 01400005 (nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : percpu_ref_tryget_many.cons
lr : percpu_ref_tryget_many.constprop.0+0xc0/0x168
sp : ffffc000829cbce0
x29: ffffc000829cbce0 x28: ffff800020be9f48 x27: ffff800013e503c0
x26: 0000000000000108 x25: 000009c05
x23: 0000000000000000 x22: ffffc000819f5000 x21: ffff800020be9f48
x20: ffff8001deda4808 x19: ffff8000a
x17: 00000000580e1fac x16: ffffc00082bbbb7c x15: 0000000000000000
x14: 0000000000000028 x13: 000000001
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffc000829cbc20
x8 :
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix unconfined user namespace restriction forced stack
If a task is already confined by a stack the unprivileged transition
restriction on unconfined is not correctly, applied. This results in
an escape if two transitions through an unconfined profile can be
executed.
Fix this by pushing the check into the per profile label build. The
check will always be done against unconfined and result in a stack of
just the unconfined component when necessary. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Return a delegation the client fails to record
When an NFS server grants a delegation in an OPEN reply,
nfs_inode_set_delegation() records it on the client. However, three
of its error flows return without sending DELEGRETURN.
A delegation can be relinquished only by DELEGRETURN (RFC 8881
Section 20.2.4), so dropping one silently leaves the server believing
the client still holds it. If the server happens to recall that
delegation, the client answers CB_RECALL with NFS4ERR_BADHANDLE
because it has no record of the stateid. The server revokes the
delegation and moves it onto its cl_revoked list, because the client
never sends the FREE_STATEID that would drain it. Every subsequent
SEQUENCE reply then carries SEQ4_STATUS_RECALLABLE_STATE_REVOKED,
and the client's state manager loops issuing TEST_STATEID across its
delegations without ever clearing the condition.
The window is easy to reach now that a server offers a write
delegation on any write OPEN: a delegation recalled for one opener
races a re-open that the server answers with a fresh write
delegation.
Instead of dropping it, hand the delegation back during these error
flows. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: move custom expectation support to helper
Originally, the ct expectation support called nf_ct_helper_ext_add() for
confirmed conntracks, which is invalid, triggering a splat. This was
fixed by commit 1710eb913bdc ("netfilter: nft_ct: skip expectations for
confirmed conntrack") which restricted it to unconfirmed conntracks.
However, early insertion of expectations into the expectations list when
the conntrack is unconfirmed leads to stale entries pointing to the
wrong hlist_head through .pprev due to ct extension reallocation.
Commit 7c9664351980 ("netfilter: move nat hlist_head to nf_conn") moved
the nat hlist_head to nf_conn for this reason:
1. ...
2. When reallocation of extension area occurs we need to fixup the
bysource hash head via hlist_replace_rcu.
I'd rather not increase the size of the struct nf_conn for this feature
has very limited scope: only one expectation can be created at a time
given expect_clash() will make nf_ct_expect_related() reports EBUSY.
For this reason, relax nf_ct_expect_related() not to drop packets in
case expectation creation fails, therefore, expectation creation becomes
best effort.
To address this issue, add an internal ct helper and attach it to the
conntrack entry to streamline the custom ct expectation support with
existing ct helpers.
Expose a new nf_conntrack_helper_release() function to release the
internal helper that is allocated and attached to the conntrack entry to
create the custom expectations. The nft_ct module removal always waits
for rcu grace period, then the NULL helper callback is observed after
this.
This patch also restricts the creation of expectations to different
helpers other than this custom helper that is created for this type of
expectations. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check load-acquire src ptr type before the load
check_atomic_load() calls check_load_mem() before atomic_ptr_type_ok().
For a load-acquire that fetches into its own source register (dst_reg ==
src_reg), check_load_mem() overwrites src_reg's type with the type of the
loaded value, so the subsequent atomic_ptr_type_ok() no longer sees the
source pointer and fails to reject the disallowed types (ctx, pkt,
flow_keys, sock).
Since bpf_convert_ctx_accesses() does not rewrite atomic loads, the raw
access to the underlying kernel object is left in place. The destination
type is taken from the ctx access itself, so a load-acquire of the sk
field of struct __sk_buff for example leaves the register typed as
PTR_TO_SOCK_COMMON_OR_NULL, which type_is_sk_pointer() does not match
either, while it actually holds unconverted struct sk_buff bytes. Once
the NULL check has passed this is a type confusion, not just a leak of
kernel data.
Validate src_reg with check_reg_arg() and check the source pointer type
with atomic_ptr_type_ok() before the load again, mirroring
check_atomic_rmw(). Out-of-range register numbers are already rejected
earlier by check_and_resolve_insns() (commit 503d21ef8eac ("bpf: Do
register range validation early")), and the only exemption there,
is_stack_arg_ldx(), requires BPF_LDX | BPF_MEM | BPF_DW and thus never
matches a BPF_ATOMIC insn. atomic_ptr_type_ok() can therefore not
dereference register state out of bounds, that is, the out-of-bounds
read addressed by the Fixes commit below does not reappear (as proven
also via selftest). |
