| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_write_cm_event()
ctx->file may only be changed under the handler lock and the xa_lock, which
is what stops uevents being queued for a ctx while ucma_migrate_id() moves
it to another file. The CM core takes that lock before invoking
ucma_event_handler(), but the write() paths that queue uevents themselves
do not.
ucma_write_cm_event() re-reads ctx->file for each of its four dereferences,
so ucma_migrate_id() can swap it mid-sequence:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
The window is the mutex_lock() itself: the writer sleeps in it while the
migration reassigns ctx->file. The list_add_tail() then runs on file B's
event_list holding only file A's mutex:
list_add corruption. prev->next should be next (ffff888101320f30),
but was ffff88814a08c418. (prev=ffff88814a075c18).
kernel BUG at lib/list_debug.c:32!
Call Trace:
ucma_write_cm_event+0x36e/0x5e0
and file A's mut is left held forever, wedging its next writer in D state.
The uevent is also stranded on a list ucma_cleanup_ctx_events() will not
walk, so it outlives its context. /dev/infiniband/rdma_cm is 0666 and no
RDMA device is involved, so an unprivileged user reaches all of this.
Take the handler lock, as ucma_cleanup_mc_events() does; ctx->cm_id is
pinned by the ucma_get_ctx() reference. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring_buffer_alloc_read_page()
ring_buffer_alloc_read_page() is racy with ring_buffer_subbuf_order_set,
it can allocate a reader page with an outdated order. This isn't a big
issue, the user can still re-allocate a new reader page and try again.
However, what is more problematic is if the value of subbuf_order
changes in the middle of ring_buffer_alloc_read_page(). In that case,
bpage->order might not match the actual allocated memory.
Use bpage->order for the allocation to prevent this race. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
when charging is enabled, dereferences the already-freed consumer handle.
When charging is enabled, try_charger_enable(cm, false) in .remove() also
dereferences the freed handles directly. Both leave use-after-free windows.
Symmetrically, probe registers the sysfs entries (power_supply_register)
before acquiring the regulators (regulator_get, inside
charger_manager_register_extcon), so userspace can reach externally_control
before the regulators are available.
Split charger_manager_register_extcon() on the sync/async boundary:
charger_manager_get_regulators() (regulator_get only, no async producer)
now runs before power_supply_register() so sysfs is not live before
regulators are available, and charger_manager_register_extcon() keeps only
the extcon notifier/work setup, still after power_supply_register() so a
power_supply_register() failure cannot reach extcon setup. This keeps the
sysfs setup/teardown ordering symmetric without introducing an asynchronous
producer on the earlier probe-error path.
Move power_supply_unregister() and try_charger_enable(cm, false) ahead of
the regulator_put() loop on both teardown paths, and adjust err_reg_extcon
(power_supply_unregister() then fall through err_regulator for
regulator_put(); get_regulators self-rolls back on its own failure).
This does not address the separate extcon-notifier-driven deref of the same
handles, which needs its own synchronization design.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ravb: serialize PTP clock teardown
ravb_ptp_interrupt() can race with ravb_ptp_stop() and pass the clock to
ptp_clock_event() while ptp_clock_unregister() is freeing it. This can
lead to a use-after-free.
Use READ_ONCE() and WRITE_ONCE() for lockless access to the clock pointer.
Atomically detach it with xchg() before disabling PTP interrupts, then
synchronize all IRQs which can invoke ravb_ptp_interrupt() before
unregistering the detached clock.
A handler which read the old pointer completes before the clock is
unregistered, while later handlers read NULL and skip the event. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: stop killed, freed and out_of_sync sharing a byte
The three connection state flags are single-bit bitfields, so they occupy
one byte of struct smc_connection and every store to one is a
read-modify-write of the other two:
u8 killed : 1;
u8 freed : 1;
u8 out_of_sync : 1;
They are not written under a common lock. smc_cdc_msg_validate() sets
out_of_sync from the receive tasklet, while smc_conn_kill() sets killed
from process context under lock_sock(), and the receive path does not defer
to the backlog when the socket is owned -- smc_cdc_msg_recv() takes only
bh_lock_sock().
Give each flag its own byte so a store no longer touches its neighbours.
All readers test them as booleans and are unchanged. struct smc_connection
grows by two bytes. |
| A race condition in the document value layer of MongoDB Server can allow concurrent server threads to operate on the same internal memory without synchronization, leading to memory corruption. An authenticated user holding ordinary read-write privileges on a database may be able to trigger this condition over the normal client protocol, resulting in server termination and potential corruption of process memory with user-influenced content. Successful use of this issue may impact the confidentiality, integrity, and availability of the affected server process. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Bluetooth Service allows an authorized attacker to elevate privileges locally. |
| In updateInternal of MediaProvider.java, there is a possible expose contents of files due to a race condition. This could lead to local information disclosure with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
pidfd: hold exec_update_lock around namespace ioctl
The PIDFD_GET_*_NAMESPACE ioctls in pidfd_ioctl() perform a filesystem
credentials ptrace access check before handing out a namespace file
descriptor. The accompanying comment states that the code "mirrors nsfs
behavior", but, unlike the corresponding procfs paths, it does so without
holding the target task's exec_update_lock.
proc_ns_get_link() and proc_ns_readlink() both take exec_update_lock for
reading around the ptrace check and the namespace lookup, so that the
credentials used for the access decision match those of the task when its
namespace is read. Without it, a caller can pass the check against the
target's old credentials and then read the namespace after the target has
execve()'d a setuid binary and committed new credentials -- accessing
namespace information it should have been denied.
Hold exec_update_lock for reading around the ptrace check and the
namespace lookup so that pidfd truly mirrors nsfs behavior, as the comment
already claims. open_namespace() itself runs outside the lock: once a
namespace reference is obtained it carries its own refcount and is opened
with the caller's own credentials, so a concurrent execve() on the target
can no longer affect the outcome. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: fix UAF of ghl_poke_timer / ghl_urb at driver unbind
For GHL (Guitar Hero Live) dongles, sony_probe() arms a periodic timer:
ghl_magic_poke() (the timer callback) submits sc->ghl_urb, and the URB
completion ghl_magic_poke_cb() re-arms the timer with mod_timer().
sony_remove() drained the timer with timer_delete_sync() and then freed
the URB with usb_free_urb():
timer_delete_sync(&sc->ghl_poke_timer);
usb_free_urb(sc->ghl_urb);
timer_delete_sync() does not block re-arming, and while the URB is in
flight the timer is not pending, so the sync delete is a no-op. A URB
completion that runs after the delete re-arms the timer, and usb_free_urb()
only drops a reference -- it does not kill an in-flight URB. sc is
allocated with devm_kzalloc() and freed once sony_remove() returns, so the
re-armed ghl_poke_timer (embedded in sc) then fires on freed memory, a
use-after-free from timer softirq. This is a disconnect/rmmod race.
Poison the URB first, then shut the timer down, before freeing the URB.
usb_poison_urb() kills any in-flight URB and permanently rejects further
submissions, so a poke timer that is still pending cannot re-submit the
URB from ghl_magic_poke() in the window before timer_shutdown_sync() runs.
usb_kill_urb() would not suffice: it only cancels the in-flight URB and
leaves it submittable once it returns, so the pending timer could
re-submit it and put a fresh URB in flight over the freed sc.
timer_shutdown_sync() then drains any last callback and blocks re-arming.
The probe error path is unaffected: it is only reached before the timer
is armed.
Reproduced under KASAN on next-20260710 via dummy_hcd + raw-gadget
emulation of the GHL PS4 dongle (VID 0x1430 / PID 0x07bb): hid-sony binds
and arms the poke timer, the poke URB is held in flight, the driver is
unbound (freeing sc), then the URB is released. The completion re-arms the
timer on the freed sc, and the re-armed timer fires ~8 s later:
BUG: KASAN: slab-use-after-free in ghl_magic_poke+0x98/0xb0
Read of size 8 at addr ffff88810b02fd50 by task swapper/0/0
ghl_magic_poke+0x98/0xb0
call_timer_fn+0x35/0x2b0
__run_timers+0x69c/0x9a0
run_timer_softirq+0x173/0x2a0
Allocated by task 169: sony_probe
Freed by task 338: devres_release_group <- hid_device_remove (sony_remove)
Found by 0sec (https://0sec.ai) using automated source analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
SCX_RQ_BAL_KEEP tells the pick to keep running the previous task, a leftover
from when balancing and picking were separate operations. An rq-level flag
only works while dispatches and picks pair up one to one, which core
scheduling breaks: selections interleave through dispatch's lock drops and a
pick can consume a stale flag, keeping a task that has since been dequeued.
Fixing core scheduling support requires the decision to travel with the
dispatch that made it. Make scx_dispatch_sched() and balance_one() return an
explicit verdict instead and drop the flag's plumbing from the tools autogen
enum headers.
Also factor the pick-side invocation, its follow-up queueing and the
post-dispatch checks out of do_pick_task_scx() into dispatch_pick(). No
functional changes intended.
v2: Drop the SCX_RQ_BAL_KEEP plumbing from the tools autogen enum headers
as well (Andrea). |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
timekeeping: Check the return value of tk_get_aux_ts64 in __do_adjtimex()
If the auxiliary clock is disabled during tk_get_aux_ts64() but is enabled
before tks->clock_valid is checked, then uninitialized stackdata will be
used in the calculations and indirectly leaked to userspace.
The same race window also exists after this change and also for the core
timekeeper. But in these cases the only effect would be incorrect
adjustments and this is userspace's responsibility to avoid this. |
| In multiple functions of alloc.c, there is a possible unauthorized read/write access due to a race condition. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in Copilot Chat (Microsoft Edge) allows an authorized attacker to disclose information over a network. |
| Concurrent execution using shared resource with improper synchronization ('race condition') in DNS Server allows an unauthorized attacker to execute code over a network. |
| An authorization bypass vulnerability in LXD due to a timing flaw during configuration merging allows an authenticated attacker to bypass target project restrictions during cross-project instance copies. When copying an instance to a target project, LXD performs restriction checks before configuration merging is complete, creating a time-of-check to time-of-use (TOCTOU) condition. An attacker can exploit this flaw to copy instances with disallowed high-privilege configurations into restricted projects, bypassing security controls. |
| Path traversal in Plesk's Backup Manager causes arbitrary file write as root by an authenticated customer. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix race between interrupt and resend
After commit f8fce75fedf7 ("fuse: clear intr_entry in fuse_resend and
fuse_remove_pending_req") the WARN_ON(!list_empty(&req->intr_entry)) in
fuse_request_free() still triggers due to the following race:
In request_wait_answer()
if (test_bit(FR_SENT, &req->flags)) -> returns true
In fuse_chan_resend()
clear_bit(FR_SENT, &req->flags)
In request_wait_answer()
queue_interrupt(req)
Fix by:
- move clearing FR_SENT inside fpq->lock
- move setting FR_PENDING inside fiq->lock
- recheck FR_SENT after acquiring fiq->lock in fuse_dev_queue_interrupt() |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: publish io-uring queues with release semantics
fuse_uring_create_queue() initializes a fuse_ring_queue and then
publishes the pointer into ring->queues[qid] with WRITE_ONCE() under the
fch->lock. There are several readers that may concurrently be fetching
that pointer locklessly and then deferencing it.
WRITE_ONCE() doesn't ensure ordering of the queue's field
initialization before the ring->queues[qid] pointer assignment. The
queue must be published with smp_store_release() so the field
initialization is guaranteed to happen before.
Readers in paths where the read may happen concurrently with the store
need to use READ_ONCE() because any race involving a plain access is
undefined. |
