| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| XenForo before 2.3.13 contains a missing authorization vulnerability in the force-agreement controller that allows any ACP administrator to access and submit force-agreement forms regardless of their assigned permissions. Attackers can bypass the option permission declared in the navigation configuration to update the global policy last-updated timestamp, forcing all users to re-agree to the privacy policy or terms of service. |
| XenForo before 2.3.13 contains a multi-factor authentication bypass vulnerability in the passkey TFA provider that allows an authenticated attacker to complete login as another user by submitting their own registered passkey credential during the WebAuthn assertion step. The passkey verification path performs a global credential lookup without validating that the matched credential belongs to the user whose login is pending, enabling an attacker who knows a target account's password to sign the challenge with their own passkey and bypass multi-factor authentication on both public forum and ACP login paths. |
| Incorrect Authorization vulnerability in Apache Syncope.
Delegated administration security checks are based on Realm hierarchy and enforced via prefix matches.
Due to incorrect implementation, two sibling Realms whose names begin with the same string cannot be correctly distinguished, resulting in incorrect authorization.
This issue affects Apache Syncope: from 3.0.0-M0 through 3.0.16, from 4.0.0-M0 Through 4.0.7, from 4.1.0-M0 through 4.1.2.
Users are recommended to upgrade to version 4.0.8 / 4.1.3, which fix this issue. |
| Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.26 until 2.11.57 and 3.7.13, Traefik forwards a client-supplied Connection header requesting Upgrade, the Upgrade: h2c token, and HTTP2-Settings to a shared backend. If the backend accepts h2c and returns 101 Switching Protocols, Traefik enters a raw tunnel and no longer applies routers, BasicAuth, ForwardAuth, IPAllowList, RateLimit, access logging, metrics, or tracing to later HTTP/2 requests, allowing an unauthenticated request through an unprotected route to reach protected paths on the same backend. This issue is fixed in 2.11.57 and 3.7.13. |
| Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.0 until 2.11.57 and 3.7.13, the HTTP/3 entrypoint ConnContext does not call service.AddTransportOnContext, so kerberosRoundTripper uses a shared backend transport instead of a transport dedicated to each frontend connection. With HTTP/3 enabled, a backend using connection-bound NTLM or Negotiate authentication, and backend keep-alive, an unrelated client can reuse a backend connection authenticated for a victim, read victim-only data, and act as that victim without the victim credentials. This issue is fixed in 2.11.57 and 3.7.13. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, `DELETE /api/v1/chatflows/:id` authorized requests with checkAnyPermission('chatflows:delete,agentflows:delete'), so possession of either permission was sufficient to reach the delete path. The delete logic then resolved the target record only by id and workspaceId and did not validate the target resource type, allowing a caller with only agentflows:delete to delete a CHATFLOW and a caller with only chatflows:delete to delete an AGENTFLOW in the same workspace. This issue is fixed in version 3.1.3. |
| Flowise is a drag-and-drop user interface for building customized large language model (LLM) flows. Prior to 3.1.3, Flowise injects $vars into the code execution sandbox without requiring variables:view, bypassing the permission-protected Variables API. Variables for the active workspace are fetched at packages/components/src/utils.ts and runtime variables are resolved from server environment variables, while the official variables route enforces variables:view. A user or API key that is denied variables:view can call /api/v1/node-custom-function and receive $vars pre-populated with all variables for the workspace, including Variable.name to Variable.value static variables and Variable.name to process.env[Variable.name] runtime variables. This can expose secrets such as database passwords, JWT secrets, SMTP passwords, and cloud keys, depending on the workspace Variables configuration. This issue is fixed in version 3.1.3. |
| Flowise is a drag & drop user interface to build a customized large language model flow. Prior to 3.1.3, Flowise openai-assistants-vector-store endpoints accept a client-controlled credential parameter and load credentials by id without checking whether that credential belongs to the caller workspace. Route permissions assistants:* only check feature access. The controller passes req.query.credential straight to the service, and the service uses findOneBy({ id: credentialId }), decrypts the credential, and calls OpenAI APIs without a workspaceId check. If an attacker knows another workspace credentialId, the attacker can use that workspace OpenAI key, read, modify, or delete victim vector stores and files, cause billing impact on the victim OpenAI account, and violate multi-tenant boundaries. This issue is fixed in version 3.1.3. |
| A vulnerability has been found in DjangoCRM django-crm up to 1.2. This vulnerability affects the function BulkUpdateCasesView of the file backend/cases/bulk_views.py of the component Bulk Case Update. The manipulation leads to missing authorization. The attack is possible to be carried out remotely. Upgrading to version 1.3.0 is able to resolve this issue. The identifier of the patch is 799bb1210238f402c0c4948c8eedb6e61cd0c8d7. You should upgrade the affected component. |
| A vulnerability was identified in wxiaoqi Spring-Cloud-Platform 3.0.1/3.1.0. This vulnerability affects the function PermissionService.checkUserPermission of the file /rpc/service/PermissionService.java of the component Permission Service. The manipulation leads to missing authorization. Remote exploitation of the attack is possible. The exploit is publicly available and might be used. The project was informed of the problem early through an issue report but has not responded yet. |
| An issue was discovered in Cyrus IMAP before 3.12.4. JMAP snooze bypasses the destination-mailbox ACL. An authenticated user with insert permissions on another user's snoozed mailbox could cause insertion of mail to that user's inbox, or any other of their mailboxes whose id was known to the user, despite having no insert permissions to the target mailbox. |
| Snipe-IT versions 8.2.0 through 8.6.x (fixed in 8.7.0) contain an incorrect authorization flaw in app/Http/Controllers/Users/UsersController::update(). The single-user edit route assigned the activated field from the request payload before evaluating the canEditAuthFields authorization gate, so an authenticated non-admin user holding the users.edit permission in the target's company scope can submit a full valid PUT request to /users/{id} and toggle the activated flag on any user, including admin and superuser accounts. Deactivating an admin locks that account out of the application until another admin or superuser re-enables it. Only the activated field is affected; username, email, password and permissions remain protected by the gate, no data is disclosed, and the API (Api\UsersController::update) and bulk-edit paths are not affected. |
| Snipe-IT versions 4.2.0 through 8.6.3 expose Laravel Passport's auto-registered personal-access-token routes (GET, POST, DELETE /oauth/personal-access-tokens*) with only 'web' and 'auth:web' middleware, without the self.api permission gate that Snipe-IT enforces on its own token endpoints (/account/api and /api/v1/account/personal-access-tokens). Any user with a valid web session and the corresponding CSRF token can POST to /oauth/personal-access-tokens and mint a long-lived bearer token for their own account, even when an administrator has denied the self.api permission. The issued token is still subject to existing per-endpoint authorization policies, so this is not a privilege escalation; it defeats the administrative control intended to block API/scripted access at the user's own permission level. Fixed in 8.7.0 (commit 3f74b8c), which registers overriding routes wrapped in the can:self.api middleware. |
| Snipe-IT versions <= 8.6.3 (fixed in 8.7.0) do not validate company assignment authorization before persisting user records via the REST API. In Api\UsersController::store() and ::update(), the user record is filled from the request and saved before the requested company_id / company_ids[] values are filtered against the actor's permitted companies (Company::getIdsForCurrentUser()). On installs using Full Multiple Companies Support (FMCS), a non-superuser holding users.create (or users.edit on a target user) can submit company identifiers for companies outside their scope — including a mix of permitted and foreign ids — causing the account row to be committed to the database before authorization is checked. Where null_company_is_floater=1 is set, the post-hoc filter leaves an empty company pivot and the account is persisted as a "floater" with cross-company visibility, allowing creation or relocation of user accounts across tenant boundaries. |
| Incorrect authorization in Loader in Google Chrome prior to 153.0.8010.36 allowed a remote attacker leveraging social engineering to bypass system access restrictions via a crafted HTML page. (Chromium security severity: Low) |
| Incorrect authorization in Extensions in Google Chrome prior to 153.0.8010.36 allowed a remote attacker to bypass system access restrictions into a privileged page via a crafted HTML page. (Chromium security severity: Low) |
| Sylius is an Open Source eCommerce Framework on Symfony. Starting in version 2.0.0 and prior to version 2.0.18, 2.1.15, and 2.2.6, an authorization bypass vulnerability exists in the shop account API. The `PATCH /api/v2/shop/account/orders/{tokenValue}/payments/{paymentId}` endpoint, used by an authenticated shop customer to change the payment method of an order that has been placed but not yet paid (state `STATE_NEW`), does not validate that the chosen payment method is enabled for the order's channel. The equivalent checkout endpoint (`PATCH /api/v2/shop/orders/{tokenValue}/payments/{paymentId}`) correctly rejects out-of-channel payment methods with `HTTP 422`; the account endpoint silently accepts them and returns `HTTP 200`. An authenticated customer can therefore assign any globally enabled payment method to their own placed order, including methods that the store operator has explicitly excluded from that channel. The issue is fixed in versions: 2.0.18, 2.1.15, 2.2.6 and above. As a workaround, decorate the `Sylius\Bundle\ApiBundle\Changer\PaymentMethodChangerInterface` service in the application. |
| A role-based access control issue was identified in the administrative expression evaluation functionality. This could allow users with certain administrative roles to access expression testing capabilities beyond their intended permissions. |
| The Okta Access Gateway improperly handles input sanitization and regular expression evaluation within its Protected Rule authorization check, resulting in an authorization bypass when an administrator has explicitly configured a Protected Rule policy on one or more application resources. |
| An unauthenticated remote code execution vulnerability exists in the Policy Manager console of Akana API Platform. A path normalization discrepancy between the authentication filter and the servlet dispatcher allows a crafted request to bypass authentication and reach an endpoint that evaluates attacker-supplied script code without sandboxing, resulting in arbitrary code execution. Exploitation requires no authentication or user interaction. |
