| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx()
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: use system_freezable_wq for init complete work
schedule_delayed_work() uses system_wq, which is non-freezable, allowing
regulator_init_complete_work to run concurrently with system suspend. This
work fires ~30s after boot to disable unused regulators via I2C. When it
races with PM suspend, the I2C adapter may already be suspended, triggering
a -ESHUTDOWN warning in __i2c_transfer():
WARNING: ... at __i2c_transfer+0x36c/0x3c8
Call trace:
__i2c_transfer
i2c_transfer
regmap_i2c_write
_regmap_update_bits
regulator_disable_regmap
_regulator_do_disable
regulator_late_cleanup
regulator_init_complete_work_function
process_one_work
Switch to system_freezable_wq so the work is frozen before any device
is suspended, eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: don't tear down KMS twice when KMS init fails
When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway
through, both display drivers already tear their KMS state down via
mdp4_destroy() / mdp5_kms_destroy() before returning the error. The
common error path in msm_drm_init() then runs msm_drm_uninit() ->
msm_drm_kms_uninit(), which tries to destroy the very same KMS a second
time, which causes a use-after-free crash.
Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't
perform error cleanup on the failure. Let the common path own the
cleanup, instead of freeing the KMS from their error paths.
The crash trace for the reference:
__lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863)
lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1))
touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136)
__flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33))
msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93)
msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184)
msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227)
try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748)
__component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739)
dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383)
mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247)
Patchwork: https://patchwork.freedesktop.org/patch/742068/ |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: reserve space for the CSA-abort countdown TLV
When a CSA countdown is active, mt7996_mcu_beacon_cntdwn() emits two
bss_bcn_cntdwn_tlv entries (the CSA countdown and the CCA-abort BCC), but
MT7996_BEACON_UPDATE_SIZE only reserved one. With MBSSID enabled and a
near-maximum beacon template the extra 8 bytes could push the offload
command past MT7996_MAX_BSS_OFFLOAD_SIZE and trigger skb_over_panic().
Reserve room for both countdown TLVs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: unwind state on add_interface failure
When mt76_wcid_alloc() fails, mt7915_add_interface() returned without
clearing the vif_mask/omac_mask bits it had already set, without removing
the firmware dev info added earlier, and without clearing a monitor_vif
pointer to the vif mac80211 is about to free. mac80211 does not call
remove_interface() for a failed add, so the indices and firmware dev
entry leaked permanently and testmode could dereference the stale
monitor_vif. Add a proper error unwind. |
| Use after free in Microsoft Edge (Chromium-based) allows an unauthorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| Vulnerability in Drupal Gammu SMS Daemon. This issue affects Gammu SMS Daemon versions: *.*. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: qcom: snps-femto-v2: Fix possible NULL-deref on early runtime suspend
Runtime PM must be enabled before creating the PHY, since phy_create()
only enables runtime PM on the PHY device if it is already enabled on
this parent device. However, the runtime PM callbacks dereference the
hsphy instance, which is not yet ready, leaving a window where a suspend
callback may trigger a NULL pointer dereference.
Take a runtime PM usage reference with pm_runtime_get_noresume() before
enabling runtime PM and release it once the PHY has been created, so that
no runtime suspend can run before the PHY is ready. This also prevents a
short window where an unnecessary runtime suspend can occur.
Use the devres-managed version to ensure PM runtime is symmetrically
disabled during driver removal for proper cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: release subpool on fill_super failure
hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size
mount options are specified. hugepage_new_subpool() may also reserve huge
pages for min_size.
If root dentry creation fails after the subpool is created, the failure
path frees the subpool with kfree(). This bypasses hugepage_put_subpool()
and can leave min_size reservations charged.
Use hugepage_put_subpool() on the failure path, matching the normal
put_super path. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware_loader: do not queue completed sysfs fallback requests
fw_load_sysfs_fallback() calls device_add() before adding the fw_priv to
pending_fw_head. device_add() publishes the fallback loading interface, so
a userspace helper which discovers the device by scanning sysfs can write 0
to the loading attribute and complete the request before it is queued as
pending.
In that interleaving firmware_loading_store() calls fw_state_done() while
pending_list still points to itself, so it cannot remove an entry from
pending_fw_head. The subsequent unconditional list_add() then queues an
already-completed fw_priv. Once the request is released, pending_fw_head
can retain a pointer to freed memory and the next fallback request can
fault while validating the list.
Only in-flight fallback requests need suspend or reboot abort handling. If
the request is already DONE after device_add(), return success from the
fallback path without sending another uevent, waiting again, or queueing it
as pending. This preserves the invariant that pending_fw_head contains only
active fallback requests. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix sleepable check for tracing/lsm prog
When CONFIG_FUNCTION_ERROR_INJECTION is disabled, a sleepable tracing prog
is allowed to attach to '__x64_'-alike prefix symbols.
It is because the verifier does not verify whether the symbol is a kernel
function or a bpf prog. That said, a sleepable tracing prog is allowed to
attach to a bpf prog target whose name has '__x64_'-alike prefix.
For example, a sleepable fentry prog attaches to a '__x64_sys_nop' XDP
prog, and copies buffer from a user pointer with bpf_copy_from_user()
helper. After attaching the XDP prog to lo interface, the kernel BUG
could be triggered by 'ping -c 1 -W 1 127.0.0.1':
[ 3.460756] BUG: sleeping function called from invalid context at kernel/bpf/trampoline.c:1324
Fix it by disallowing sleepable prog always when its target
btf is not a kernel's btf. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregister_handler_list() blocks future handler lookups, but it does
not wait for sc_rx_work that already passed o2net_handler_get(). That
drain needs to cover local listener teardown as well, where the o2net
ordered workqueue may already be inside destroy_workqueue().
Fix the lifetime rule in both directions. Initialize the region delayed
works before publishing reg through the o2net handler table, keep new or
stopping regions non-armable with hr_stopping, and quiesce both delayed
works on failed-start and teardown paths even when no heartbeat thread is
left to call o2hb_disarm_timeout(). Then unregister handlers before
tearing down handler-visible region state and make the drain wait for the
active or destroying o2net ordered workqueue before release frees reg.
The buggy scenario involves two paths, with each column showing the order
within that path:
region lifecycle: late negotiate callback:
1. make_item() registers the 1. o2net_process_message() gets a
region handlers before heartbeat handler for reg.
dev_store() has built a 2. The callback runs after the lookup
runnable heartbeat context. lock is dropped and dereferences reg.
2. A failed start or rmdir 3. An approve or timeout path tries to
stops the heartbeat thread, queue reg's delayed work, or release
quiesces existing work, and races the callback body after handler
drops the final configfs ref. unregister.
3. region_release() must drain 4. The callback or delayed work can
handler-visible o2net rx work outlive reg unless lifecycle code
before freeing reg. keeps the region non-armable and
drains the active-or-destroying
o2net workqueue.
Validation reproduced this kernel report:
KASAN slab-use-after-free in __run_timers+0x22c/0x5b0
Write of size 8
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__run_timers+0x22c/0x5b0
kasan_report+0xe0/0x110
_raw_spin_unlock_irqrestore+0x27/0x60
try_to_wake_up+0x191/0xf70
timer_expire_remote+0xae/0xf0
run_timer_softirq+0x19b/0x1a0
handle_softirqs+0x156/0x660
__irq_exit_rcu+0xc4/0x160
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
o2hb_heartbeat_group_make_item+0x3c/0x600 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table. |
| In the Linux kernel, the following vulnerability has been resolved:
rapidio: clear mport->net when rio_add_net() fails
rio_alloc_net() stores the newly allocated rio_net in mport->net before
rio_scan_alloc_net() registers the device.
If rio_add_net() fails, rio_scan_alloc_net() drops the device reference
with put_device(), which releases the rio_net through the device release
callback. However, mport->net is left pointing at the freed object.
A later mport unregister path can then dereference the dangling mport->net
pointer and may try to free the same rio_net again.
Clear mport->net in the rio_add_net() failure path, matching the cleanup
done for the destID table allocation failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline xattrs during inode block validation
Patch series "ocfs2: validate xattr entry bounds", v7.
This series validates OCFS2 xattr entry name/value bounds when xattr
metadata is read and validated, before getxattr() or listxattr() can walk
out-of-range entry arrays or offsets from corrupted metadata.
This patch (of 2):
ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk
metadata from it, but inline xattr metadata is still checked only in
operation-specific consumers. The existing ibody lookup helper validates
inline header placement and entry count, but inode block validation does
not reject entry name/value bounds.
Add a flat xattr entry validator and call it from inode block validation
for inline xattrs. Keep the operation paths on their existing
header/count lookup checks; the full entry bounds check now runs when the
inode block is validated at read time.
Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or
listxattr() can walk past the inline storage.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170
Read of size 2 at addr ffff8881242a2000 by task python3/529
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_find_entry+0x5a/0x170
ocfs2_xattr_get_nolock+0x20a/0x820
ocfs2_xattr_get+0x10c/0x1e0
__vfs_getxattr+0xe2/0x130
vfs_getxattr+0x185/0x1b0 |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: check import_ubuf() return value
import_ubuf() can fail if the address range (provided by the userspace
ublk server) is outside the allowed user address space. Return that 0
bytes were copied if import_ubuf() fails rather than passing an
uninitialized struct iov_iter to ublk_copy_user_pages(). |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: skip dying blkg in blkcg_activate_policy()
When switching IO schedulers on a block device, blkcg_activate_policy()
can race with concurrent blkcg deletion, leading to a use-after-free in
rcu_accelerate_cbs.
T1: T2:
blkg_destroy
kill(&blkg->refcnt) // blkg->refcnt=1->0
blkg_release // call_rcu(__blkg_release)
...
blkg_free_workfn
->pd_free_fn(pd)
elv_iosched_store
elevator_switch
...
iterate blkg list
blkg_get(blkg) // blkg->refcnt=0->1
list_del_init(&blkg->q_node)
blkg_put(pinned_blkg) // blkg->refcnt=1->0
blkg_release // call_rcu again
rcu_accelerate_cbs // uaf
Fix this by checking hlist_unhashed(&blkg->blkcg_node) before getting
a reference to the blkg. This is the same check used in blkg_destroy()
to detect if a blkg has already been destroyed. If the blkg is already
unhashed, skip processing it since it's being destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-hidpp: Fix FF device cleanup on init failure
hidpp_ff_init() creates the input force-feedback device with
input_ff_create(), then allocates the HID++ FF private data,
effect ID array, and workqueue.
If any of those allocations fail after input_ff_create() succeeds,
the function returns an error without destroying the FF device.
Add an unwind path that frees the private allocations made by
hidpp_ff_init() and calls input_ff_destroy() for failures after
input_ff_create() succeeds. |
