| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: qcom_battmgr: terminate the strings from firmware
The qcom_battmgr_sc8280xp_strcpy() takes a Pascal-style string when the
firmware sends one. Otherwise it copies all BATTMGR_STRING_LEN bytes and
leaves the destination without a terminator.
Those destinations are model_number, serial_number and oem_info, each
BATTMGR_STRING_LEN and declared next to each other. They go out to user
space as val->strval, which power_supply_format_property() prints with
"%s", so a firmware string that fills the whole field makes that read run
into the following members.
Use strscpy() so the copy always terminates, the way the SM8350 path
already does for the same field. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate level in perf mask ioctls
isst_if_get_perf_level_mask() and isst_if_get_base_freq_mask() use the
user-provided level as an index into perf_levels[] via
_read_pp_level_info() and _read_bf_level_info(), but neither helper
validates it first.
The adjacent level-info helpers reject levels above max_level before
reading the same per-level register block. Add the same bounds checks to
the mask helpers, and reject disabled SST-PP levels in
isst_if_get_perf_level_mask() to match isst_if_get_perf_level_info().
This prevents out-of-bounds reads from the per-level offset table on
invalid ioctl input. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
sk_store() and kek_store() strip a trailing newline from the sysfs
write before allocating the key buffer:
length = count;
if (buf[length - 1] == '\n')
length--;
bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL);
but then pass the original "count" (not "length") as the copy size to
hp_wmi_perform_query(), which memcpy()s that many bytes out of the
"length"-sized allocation, reading one byte past it whenever the write
ends in a newline, the normal case for a shell "echo" into sysfs.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in hp_wmi_perform_query+0x1e9/0x460 [hp_bioscfg]
Read of size 28 at addr ffff88813c8e2b80 by task python3/16022
...
sk_store+0xa7/0x240 [hp_bioscfg]
kernfs_fop_write_iter+0x3e1/0x5d0
...
The buggy address is located 0 bytes inside of
allocated 27-byte region [ffff88813c8e2b80, ffff88813c8e2b9b)
Reproduced identically for kek_store, and at multiple write sizes
(28, 57, 201 bytes), each time reading exactly one byte past a
kmemdup() allocation one byte smaller than the write.
Fix by passing "length" instead of "count" to hp_wmi_perform_query()
in both functions. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
validate_password_input() computes length = strlen(buf) and then
checks buf[length - 1] to strip a trailing newline, without checking
that length is nonzero first. Writing an empty string (a bare '\n')
to current_password or new_password gives length == 0, and
buf[length - 1] reads buf[-1], one byte before the heap allocation
holding the copied input.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
Read of size 1 at addr ffff88811bd8da9f by task sh/13740
...
store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
current_password_store+0x14/0x20 [hp_bioscfg]
...
The buggy address is located 23 bytes to the right of
allocated 8-byte region [ffff88811bd8da80, ffff88811bd8da88)
Reproduced identically via new_password_store. Execution continues
past the bad read (the garbage byte only affects whether "length" is
decremented by one), so the write completes and returns success; this
is a pure information read past the buffer, not a crash, but it is
still an out-of-bounds access KASAN correctly flags.
Fix by only checking buf[length - 1] when length is nonzero. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: pass validated element count to package parsers
The per-type package parsers are handed the wrong element count.
hp_init_bios_package_attribute() validates obj->package.count and then
calls one of the five hp_populate_*_package_data() wrappers (string,
integer, enumeration, ordered list, password). Each wrapper forwards a
count to its hp_populate_*_elements_from_package() parser, but instead
of forwarding the validated obj->package.count it derives the count
from elements[0]. elements[0] is the NAME field and is always an
ACPI_TYPE_STRING, so reading ->package.count from it in fact reads
->string.length through the union acpi_object. The parsers thus bound
themselves against the length of the name string rather than against
the real number of elements in the package.
This is safe today because hp_init_bios_package_attribute() refuses any
package that has fewer than the type's element count, so a parser only
ever runs on a full package and never reads past it regardless of the
bogus bound.
An upcoming change relaxes that check to accept shorter packages. Once
a parser can receive fewer elements than its per-type count, a bound
taken from the name length no longer reflects the array size, and the
"elem < count" loop conditions and "elem + n >= count" sub-loop guards
read past the end of elements[] - an out-of-bounds heap read.
Forward the validated obj->package.count to every *_package_data()
wrapper so the parsers bound themselves against the real package size.
This does not change behaviour for the packages that enumerate
correctly today and is a prerequisite for accepting shorter packages
safely. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: reset IP6CB after IPv6 decapsulation
decap_and_validate() pulls the outer SRv6 headers and makes the inner
packet the skb network header. The IPv6 control block still contains
values collected while parsing the outer packet, including nhoff and
extension-header flags.
End.DX6 and End.DT6 route the inner IPv6 packet directly to the IPv6
input path. An unprivileged user can reach End.DT6 from a user and net
namespace by installing a local SID and injecting an outer packet with
Hop-by-Hop and Destination Options headers followed by an SRH and a
minimal inner IPv6 packet.
The outer extension headers leave a large nhoff in IP6CB. After
decapsulation, ip6_protocol_deliver_rcu() uses that stale offset on the
inner packet and reads beyond the skb head. KASAN reports:
BUG: KASAN: slab-out-of-bounds in ip6_protocol_deliver_rcu
ip6_protocol_deliver_rcu+0x1118/0x1450
ip6_input_finish+0x11b/0x240
seg6_local_input_core+0xed/0x2e0
lwtunnel_input+0x1e9/0x4e0
ipv6_rthdr_rcv+0x525f/0x6c50
ip6_protocol_deliver_rcu+0xcb7/0x1450
Before clearing IP6CB for an inner IPv6 packet, save its incoming
interface index and L3 slave state. Restore both after the clear and set
nhoff to the inner IPv6 base-header nexthdr field.
Use IP6CB(skb)->iif rather than skb->skb_iif because VRF processing can
replace skb_iif with the L3 master while IP6CB keeps the receiving
interface. Preserve IP6SKB_L3SLAVE for the same reason. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: 6fire: bound the MIDI event length from the device
usb6fire_comm_receiver_handler() forwards a MIDI event using a length
byte the device supplies, with no bound and no check that the transfer
delivered that many bytes:
if (!urb->status) {
if (rt->receiver_buffer[0] == 0x10) /* midi in event */
if (midi_rt)
midi_rt->in_received(midi_rt,
rt->receiver_buffer + 2,
rt->receiver_buffer[1]);
}
receiver_buffer is a 64-byte kzalloc() buffer (COMM_RECEIVER_BUFSIZE), so
only 62 bytes follow the two-byte header. receiver_buffer[1] is a u8 the
device chooses, so a device that answers with 0x10 and a length of 0xFF
makes snd_rawmidi_receive() read 255 bytes starting two bytes into a
64-byte object. The bytes past the buffer are handed to userspace
through the rawmidi read path.
urb->actual_length is not consulted either, so a short transfer leaves
both the type byte and the length byte at their previous values and the
handler acts on stale data.
The receiver URB is submitted from usb6fire_comm_init() at probe, so the
read happens on plug with no user action; forwarding to userspace also
needs a MIDI input substream open, since usb6fire_midi_in_received()
only calls snd_rawmidi_receive() when rt->in is set.
KASAN on 7.2.0-rc5 (arm64), single packet from an emulated device:
BUG: KASAN: slab-out-of-bounds in snd_rawmidi_receive
Read of size 255 at addr ffff000009f64682 by task bash/183
__asan_memcpy
snd_rawmidi_receive
usb6fire_midi_in_received [snd_usb_6fire]
usb6fire_comm_receiver_handler [snd_usb_6fire]
Allocated by task 11:
usb6fire_comm_init [snd_usb_6fire]
usb6fire_chip_probe [snd_usb_6fire]
The buggy address is located 2 bytes inside of
allocated 64-byte region [ffff000009f64680, ffff000009f646c0)
Reject the event when the length exceeds the bytes that follow the
header, and require the transfer to have delivered the header plus that
many bytes. The receiver URB is submitted with a 64-byte
transfer_buffer_length, so a genuine device cannot deliver an event
longer than those 62 bytes and nothing valid is dropped.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: aloop: Check card index validity at probe
aloop driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mpu401: Check card index validity at probe
mpu401 driver blindly trusts that the given devptr->id value is within
the proper card index range at probe. It's OK for the devices the
driver itself creates at the module probe time, but if the device is
bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: portman2x4: Check card index validity at probe
Although portman2x4 driver has a check of the given devptr->id value,
it doesn't check for a negative id, which is often given as "none" or
such value when bound via sysfs. This may lead to OOB access for
index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: virmidi: Check card index validity at probe
virmidi driver blindly trusts that the given devptr->id value is
within the proper card index range at probe. It's OK for the devices
the driver itself creates at the module probe time, but if the device
is bound manually via sysfs interface, this could be -1 as "none", and
this leads to OOB access for index[] and other parameters.
Add a sanity check for the card index and warn/correct it if it's a
value out of the range. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: validate default EEPROM firmware size
The default EEPROM firmware is parsed and copied as a full EEPROM
without checking its length. A truncated file can make the driver
read beyond the firmware buffer during variant validation or the
fallback copy.
Reject files shorter than MT7996_EEPROM_SIZE before parsing or
copying the firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
w1: ds28e17: reject an oversize length on an I2C block read
w1_f19_i2c_master_transfer() is the master_xfer for the DS28E17 1-Wire
to I2C bridge. On an I2C_M_RECV_LEN read, it takes the length from the
device. The downstream slave puts a length byte in buf[0]. The driver
then reads that many bytes into buf[1] with w1_f19_i2c_read().
buf[0] is controlled by the device and can be 0 to 255.
w1_f19_i2c_read() only rejects a zero count. The caller buffer is
I2C_SMBUS_BLOCK_MAX + 2, so 34 bytes. A length above 32 makes the read
run past it, up to about 222 bytes out of bounds.
The SMBus core does check buf[0] against I2C_SMBUS_BLOCK_MAX. That
check runs after master_xfer returns. By then the write is already
done. i2c-algo-bit rejects an oversize length before it copies, and
returns -EPROTO.
Reject a length above I2C_SMBUS_BLOCK_MAX at both RECV_LEN sites, the
same way i2c-algo-bit does. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use pskb_network_may_pull() for transmit path header pulls
In vxlan_xmit(), arp_reduce(), and vxlan_mdb_entry_skb_get(), pskb_may_pull() was
being called to verify the availability of network layer headers (ARP, IPv6/ND,
IP/IPv6 MDB keys).
However, during transmit skb->data points to the MAC header, so skb_network_offset(skb)
is ETH_HLEN (14 bytes). Using pskb_may_pull(skb, len) only checks len bytes from skb->data
rather than skb_network_offset(skb) + len, which can leave part of the network header
in non-linear frags.
Replace these remaining pskb_may_pull() calls with pskb_network_may_pull() to properly
account for the MAC header offset. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_read_folio() to wait on writeback
Fix netfs_read_folio() to wait for an ongoing writeback to complete so that
it can trust the dirty flag and whatever is attached to folio->private
(folio->private may get cleaned up by the collector before it clears the
writeback flag). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix same-register dst/src OOB read and pointer leak in sock_ops
When a BPF sock_ops program accesses ctx fields with dst_reg == src_reg,
the SOCK_OPS_GET_SK() and SOCK_OPS_GET_FIELD() macros fail to zero the
destination register in the !fullsock / !locked_tcp_sock path.
Both macros borrow a temporary register to check is_fullsock /
is_locked_tcp_sock when dst_reg == src_reg, because dst_reg holds the
ctx pointer. When the check is false (e.g., TCP_NEW_SYN_RECV state with
a request_sock), dst_reg should be zeroed but is not, leaving the stale
ctx pointer:
- SOCK_OPS_GET_SK: dst_reg retains the ctx pointer, passes NULL checks
as PTR_TO_SOCKET_OR_NULL, and can be used as a bogus socket pointer,
leading to stack-out-of-bounds access in helpers like
bpf_skc_to_tcp6_sock().
- SOCK_OPS_GET_FIELD: dst_reg retains the ctx pointer which the
verifier believes is a SCALAR_VALUE, leaking a kernel pointer.
Fix both macros by:
- Changing JMP_A(1) to JMP_A(2) in the fullsock path to skip the
added instruction.
- Adding BPF_MOV64_IMM(si->dst_reg, 0) after the temp register
restore in the !fullsock path, placed after the restore because
dst_reg == src_reg means we need src_reg intact to read ctx->temp. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix overflow in dacloffset bounds check
The dacloffset field was originally typed as int and used in an
unchecked addition, which could overflow and bypass the existing
bounds check in both smb_check_perm_dacl() and smb_inherit_dacl().
This could result in out-of-bounds memory access and a kernel crash
when dereferencing the DACL pointer.
This patch converts dacloffset to unsigned int and uses
check_add_overflow() to validate access to the DACL. |
| FFmpeg before 9.0 has an out-of-bounds read because the copied extradata lacked required padding before GetBitContext-based access in libavformat/iamf_writer.c. |
| Out-of-bounds read in Windows Device Health Attestation (DHA) allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Windows Program Compatibility Assistant Service allows an authorized attacker to disclose information over a network. |
