| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Missing authentication for a critical function (CWE-306) in the management service (uavmonitor_usbv1) of the 1300 communications board in DJI AeroScope Mobile (TP703) firmware 03.00.00.26, with 1300 communications board firmware 02.00.07.12 through 02.00.08.40, allows an unauthenticated attacker on the local network to read device information, such as the serial number, MAC address, IP address and radio configuration, and to change configuration settings. The service accepts commands in DJI's proprietary DUML protocol without any authentication. Exploitation requires network access to TCP port 16000 on the board and that the unit is not connected to another controlling host. The same commands are also accepted over the USB operator port. Confirmed on a physical device.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. DJI has discontinued AeroScope Mobile and no fixed firmware is available. |
| Psono Server Community Edition versions 1.12.6 through 7.5.0 and Psono Server Enterprise Edition before 7.5.1 do not require accepted group membership when authorizing deletion of group share-rights. The DELETE /share/right/ endpoint checks for a membership matching the target group, the authenticated user, and share_admin=True, but omits accepted=True. An authenticated remote attacker who has been invited to a group with share-admin privileges, and who knows a group share-right UUID, can therefore delete that group's share-right record without accepting the invitation or after declining it. Pending invitations have accepted=None, while declined invitations retain accepted=False and the share_admin flag. Deletion revokes the group's access to the affected share and its contained secrets for all accepted group members, without deleting the underlying data or disclosing secret contents. The issue was fixed in version 7.5.1 of both editions, released on 2026-10-13. |
| A integer overflow that can lead to a buffer overrread in the XRes QueryResourceBytes Swap Path in the X.Org xwayland before 24.1.15 and X Server before 21.1.26 on 32bit systems could be used by authenticated clients to crash the X server. |
| A stack buffer overflow in ProcXTestFakeInput DeviceValuator handling in X.Org xwayland before 24.1.15 and X server before 21.1.26 could be used by authenticated clients to crash or execute code in the X server. |
| In Eclipse BaSyx Go Components versions up to and including 1.1.2, ABAC-enabled deployments of the Submodel Repository and the AAS Environment return Submodel Elements that the caller is not authorized to read from `GET /submodels/{submodelIdentifier}/submodel-elements`.
If an access rule grants READ on a single Submodel Element through a `$sme` `REFERABLE` object, the list route returns every element of that Submodel, including its value, as soon as one element matches the caller's rules. The single-element route and the full Submodel read enforce the same rule and deny access to the other elements. An authenticated caller with a READ grant for one element of a Submodel can therefore read all other elements of that Submodel.
The issue is fixed in Eclipse BaSyx Go Components v1.1.3. |
| In EncodeLastScanBufferElement of data_manager.cc, there is a possible out-of-bounds write due to a logic error in the code. This could lead to remote escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In edgetpu_group_clear_responses of edgetpu_group.c, there is a possible Use After Free due to a logic error in the code. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation. |
| In smmu_unmap_visit_leaf of arm-smmu-v3.c, there is a possible way to release active direct memory access page references during unmapping due to a logic error. This could lead to local escalation of privilege with System execution privileges needed. User interaction is not needed for exploitation. |
| In smmu_detach_dev of private/google-modules/iommu/arm-smmu-v3/drivers/iommu/arm/arm-smmu-v3/pkvm/arm-smmu-v3.c, there is a possible Use After Free due to a logic error in the code. This could lead to local escalation of privilege with User execution privileges needed. User interaction is not needed for exploitation. |
| In port_shutdown of ipc.c, there is a possible Use After Free due to a race condition. This could lead to local escalation of privilege with execution privileges needed. User interaction is for exploitation. |
| Privilege escalation in the Nimbus Desktop Client component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| Privilege escalation in the DOM: Navigation component. This vulnerability was fixed in Firefox 160, Firefox ESR 153.7, Thunderbird 160, and Thunderbird 153.7. |
| In multiple locations, there is a possible way to bypass key authorization policies during wrapped key import due to a logic error. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-blkback: Avoid UAF when reading I/O statistics
Reading I/O statistics via sysfs concurrently with tearing down a
frontend device might result in UAF or a NULL dereference, as the
reading of the statistics data is not synchronized with freeing the
data.
Use a rwlock for synchronizing.
This is XSA-528 / CVE-2026-100082 |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: defer xenvif_mcast_addr_list_free()
In order for the function to legitimately avoid locking/RCU, it needs to
run after all TX/RX processing has finished/stopped: Lookups happen from
xenvif_start_xmit(), while adds/removes happen from xenvif_tx_action()
(called out of xenvif_poll()).
Move the call out of xenvif_disconnect_data() (the call to the function
from connect()'s error path doesn't require any cleaning up there), and
put it past the synchronization point in backend_disconnect().
This is XSA-527 / CVE-2026-100081. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netback: Fix UAF when reading statistics data
The network statistic data in the driver is protected by RCU.
Unfortunately when tearing down the queues after an error during
connecting to the frontend (e.g. due to illegal Xenstore data filled
in by the guest), the statistic data is being freed without
synchronizing the RCU state. In case the data is being read via sysfs
in this phase, access to already freed memory or memory being in new
use is possible.
Fix that by calling synchronize_net() before freeing the queue data.
This is XSA-526 / CVE-2026-100080 |
| A directory traversal bug was discovered when unpacking 3.0 (quilt) source packages, where the packaging tarball could contain the quilt database directory (.pc) with attacker controlled symlinks, where that in combination with patches that would fail to apply, could be used to make the code used to restore the backup files to either modify or remove the files pointed to by the attacker controlled symlinks. |
| Dell PowerStore contains an OS Command Injection vulnerability. A high-privileged attacker could exploit this vulnerability, potentially leading to arbitrary root command execution on the appliance. |
| In Eclipse BaSyx Go Components versions up to and including 1.1.2, ABAC-enabled deployments of the Submodel Repository and the AAS Environment do not apply an access rule's `FILTERLIST` fragment filters to single Submodel reads.
`GET /submodels` removes the fields that a rule's `FILTERLIST` hides, but `GET /submodels/{submodelIdentifier}` and `GET /submodels/{submodelIdentifier}/$metadata` return them unfiltered. An authenticated caller with READ access to a Submodel can therefore read fields that the access rules hide from them, for example `supplementalSemanticIds` keys that name the other parties allowed to read the Submodel.
If versioning is enabled (`history.mode` set to `api` or `audit`), `GET /submodels/{submodelIdentifier}/$history` and `GET /shells/{aasIdentifier}/$history` in the Submodel Repository, AAS Repository and AAS Environment return the complete stored version without applying the rule's formula or fragment filters. A caller whose rules grant READ on these routes can read fields that the access rules hide, and Submodels and Asset Administration Shells that the direct read does not return to them at all.
The issue is fixed in Eclipse BaSyx Go Components v1.1.3. |
| A improper neutralization of special elements used in an sql command ('sql injection') vulnerability in Fortinet FortiAnalyzer 8.0.0 through 8.0.1, FortiAnalyzer 7.6.0 through 7.6.7, FortiAnalyzer 7.4.0 through 7.4.11, FortiAnalyzer 7.2.0 through 7.2.12, FortiAnalyzer Cloud 8.0.0 through 8.0.1, FortiAnalyzer Cloud 7.6.0 through 7.6.7, FortiAnalyzer Cloud 7.4.1 through 7.4.11, FortiAnalyzer Cloud 7.2.1 through 7.2.12, FortiManager 8.0.0 through 8.0.1, FortiManager 7.6.0 through 7.6.7, FortiManager 7.4.0 through 7.4.11, FortiManager 7.2.0 through 7.2.12, FortiManager Cloud 8.0.0 through 8.0.1, FortiManager Cloud 7.6.0 through 7.6.7, FortiManager Cloud 7.4.1 through 7.4.11, FortiManager Cloud 7.2.1 through 7.2.12 may allow an authenticated attacker to execute unauthorized SQL commands via specially crafted requests. |
