In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value.
dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout
Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a
condition that is never fulfilled, the CPU busy-waits for prolonged time
and the timeout triggers only with a massive delay causing a CPU stall.
This happens due to a huge underestimation of wall clock time in
poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use
timekeeping in read_poll_timeout_atomic()") changed the behavior to no
longer use ktime_get at the expense of underestimation of wall clock
time which appears to be very large for delay_us=0. Instead of timing
out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout
takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for
loop in poll_timeout_us_atomic takes) which is in the range of several
minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero
value for delay_us. Use delay_us=10 to keep the delay in the hot path of
starting DMA transfers minimal but still avoid CPU stalls in case of
unexpected hardware failures.
One-off measurement with delay_us=0 causes the cpu to busy wait around 7
minutes in the timeout case. After applying this patch with delay_us=10
the measured timeout was 1053428 microseconds which is roughly
equivalent to the expected 1000000 microseconds specified in
XILINX_DMA_LOOP_COUNT.
Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Thu, 17 Sep 2026 16:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout Currently when calling xilinx_dma_poll_timeout with delay_us=0 and a condition that is never fulfilled, the CPU busy-waits for prolonged time and the timeout triggers only with a massive delay causing a CPU stall. This happens due to a huge underestimation of wall clock time in poll_timeout_us_atomic. Commit 7349a69cf312 ("iopoll: Do not use timekeeping in read_poll_timeout_atomic()") changed the behavior to no longer use ktime_get at the expense of underestimation of wall clock time which appears to be very large for delay_us=0. Instead of timing out after approximately XILINX_DMA_LOOP_COUNT microseconds, the timeout takes XILINX_DMA_LOOP_COUNT * 1000 * (time that the overhead of the for loop in poll_timeout_us_atomic takes) which is in the range of several minutes for XILINX_DMA_LOOP_COUNT=1000000. Fix this by using a non-zero value for delay_us. Use delay_us=10 to keep the delay in the hot path of starting DMA transfers minimal but still avoid CPU stalls in case of unexpected hardware failures. One-off measurement with delay_us=0 causes the cpu to busy wait around 7 minutes in the timeout case. After applying this patch with delay_us=10 the measured timeout was 1053428 microseconds which is roughly equivalent to the expected 1000000 microseconds specified in XILINX_DMA_LOOP_COUNT. Add a constant XILINX_DMA_POLL_DELAY_US for delay_us value. | |
| Title | dmaengine: xilinx_dma: Fix CPU stall in xilinx_dma_poll_timeout | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-09-17T16:11:59.904Z
Reserved: 2026-09-17T16:02:15.090Z
Link: CVE-2026-93168
Vulnrichment
No data.
NVD
No data.
Redhat
No data.
OpenCVE Enrichment
No data.
Weaknesses
No weakness.