In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, however, can go away underneath it.
rfcomm_recv_disc() forces the dlc state before tearing it down:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers
BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state
already BT_CLOSED that switch does not match and the function falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL, while
d->defer_setup stays 1.
A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after
that point therefore skips the -ENOTCONN path -- sk->sk_state is
BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the
NULL session. No race is needed: once the DISC has been processed, the
dereference is unconditional.
Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over
/dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM
PSM, starts a session and sends SABM for a channel bound with
BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been
accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted
socket then hits:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780
Call Trace:
<TASK>
do_sock_getsockopt+0x3ad/0x7d0
__sys_getsockopt+0x10e/0x1b0
__x64_sys_getsockopt+0xc2/0x160
do_syscall_64+0xda/0x4b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
0x10 is the offset of sock in struct rfcomm_session;
rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt().
Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the
deferred setup accept") fixed the same "a remote DISC clears the session
while deferred setup is still flagged" problem in rfcomm_dlc_accept();
this is the remaining instance of it, in the getsockopt path.
Deferred setup only leaves a socket usable here once it has reached
BT_CONNECT2, so restrict the exception to that state and check that a
session is actually present before following it.
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, however, can go away underneath it.
rfcomm_recv_disc() forces the dlc state before tearing it down:
d->state = BT_CLOSED;
__rfcomm_dlc_close(d, err);
The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers
BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state
already BT_CLOSED that switch does not match and the function falls
through to rfcomm_dlc_unlink(), which sets d->session = NULL, while
d->defer_setup stays 1.
A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after
that point therefore skips the -ENOTCONN path -- sk->sk_state is
BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the
NULL session. No race is needed: once the DISC has been processed, the
dereference is unconditional.
Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over
/dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM
PSM, starts a session and sends SABM for a channel bound with
BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been
accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted
socket then hits:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780
Call Trace:
<TASK>
do_sock_getsockopt+0x3ad/0x7d0
__sys_getsockopt+0x10e/0x1b0
__x64_sys_getsockopt+0xc2/0x160
do_syscall_64+0xda/0x4b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
0x10 is the offset of sock in struct rfcomm_session;
rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt().
Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the
deferred setup accept") fixed the same "a remote DISC clears the session
while deferred setup is still flagged" problem in rfcomm_dlc_accept();
this is the remaining instance of it, in the getsockopt path.
Deferred setup only leaves a socket usable here once it has reached
BT_CONNECT2, so restrict the exception to that state and check that a
session is actually present before following it.
Default status is the baseline for the product, each version can override it (e.g. patched versions marked unaffected).
| Vendor | Product | Default status | Versions | |||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Linux | Linux | unaffected |
|
|||||||||||||||||||||||||||||||||
| Linux | Linux | affected |
|
No data.
No data.
OpenCVE Enrichment is a feature of OpenCVE that uses AI to automatically link vendors and products to CVEs. Learn more on GitHub.
No data.
Advisories
No advisories yet.
Fixes
Solution
No solution given by the vendor.
Workaround
No workaround given by the vendor.
References
History
Sun, 18 Oct 2026 17:15:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Weaknesses | CWE-476 |
Sun, 18 Oct 2026 15:30:00 +0000
| Type | Values Removed | Values Added |
|---|---|---|
| Description | In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not connected as long as deferred setup is enabled: if (sk->sk_state != BT_CONNECTED && !rfcomm_pi(sk)->dlc->defer_setup) { err = -ENOTCONN; break; } l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk; dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind() creates a child socket for an incoming connection on a listening socket that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The session, however, can go away underneath it. rfcomm_recv_disc() forces the dlc state before tearing it down: d->state = BT_CLOSED; __rfcomm_dlc_close(d, err); The RFCOMM_DEFER_SETUP early return in __rfcomm_dlc_close() only covers BT_CONNECT, BT_CONFIG, BT_OPEN and BT_CONNECT2, so with the state already BT_CLOSED that switch does not match and the function falls through to rfcomm_dlc_unlink(), which sets d->session = NULL, while d->defer_setup stays 1. A getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket after that point therefore skips the -ENOTCONN path -- sk->sk_state is BT_CLOSED, but dlc->defer_setup is still set -- and dereferences the NULL session. No race is needed: once the DISC has been processed, the dereference is unconditional. Reproduced on a KASAN kernel under QEMU with a BR/EDR peer emulated over /dev/vhci: the peer brings up an ACL link, opens L2CAP on the RFCOMM PSM, starts a session and sends SABM for a channel bound with BT_DEFER_SETUP, and sends DISC for that dlci after the socket has been accepted. getsockopt(SOL_RFCOMM, RFCOMM_CONNINFO) on the accepted socket then hits: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 UID: 0 PID: 150 Comm: init Tainted: G B 7.3.0-rc3-g5dd1818b15d9 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:rfcomm_sock_getsockopt+0x529/0x780 Call Trace: <TASK> do_sock_getsockopt+0x3ad/0x7d0 __sys_getsockopt+0x10e/0x1b0 __x64_sys_getsockopt+0xc2/0x160 do_syscall_64+0xda/0x4b0 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> 0x10 is the offset of sock in struct rfcomm_session; rfcomm_sock_getsockopt_old() is inlined into rfcomm_sock_getsockopt(). Commit 43a556b2fd43 ("Bluetooth: RFCOMM: take rfcomm_mutex for the deferred setup accept") fixed the same "a remote DISC clears the session while deferred setup is still flagged" problem in rfcomm_dlc_accept(); this is the remaining instance of it, in the getsockopt path. Deferred setup only leaves a socket usable here once it has reached BT_CONNECT2, so restrict the exception to that state and check that a session is actually present before following it. | |
| Title | Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO | |
| First Time appeared |
Linux
Linux linux Kernel |
|
| CPEs | cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:* | |
| Vendors & Products |
Linux
Linux linux Kernel |
|
| References |
|
|
Projects
Sign in to view the affected projects.
MITRE
Status: PUBLISHED
Assigner: Linux
Published:
Updated: 2026-10-18T15:15:04.988Z
Reserved: 2026-09-25T10:25:14.350Z
Link: CVE-2026-98455
Vulnrichment
No data.
NVD
Status : Received
Published: 2026-10-18T16:16:55.863
Modified: 2026-10-18T16:16:55.863
Link: CVE-2026-98455
Redhat
No data.
OpenCVE Enrichment
Updated: 2026-10-18T17:00:09Z
Weaknesses