Export limit exceeded: 10314 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10314 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90037 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Prevent client use-after-free during close_lru reaping An nfs4_openowner left on nn->close_lru after its final CLOSE keeps its last closed stateid in oo_last_closed_stid, holding only a raw pointer to its nfs4_client. The laundromat reaps timed-out entries, drops nn->client_lock, and calls nfs4_put_stid(), which dereferences the client through cl_lock. Nothing pins the client across that window, so a concurrent force_expire_client() can free it and nfs4_put_stid() reads freed memory. __destroy_client() hits the same race, walking clp->cl_openowners without cl_lock. Pin the client with cl_rpc_users before dropping client_lock, and skip clients already expiring. __destroy_client() then cleans up its own close_lru entries through release_last_closed_stateid(), so teardown no longer races the laundromat. | ||||
| CVE-2026-90045 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | ||||
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89970 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: Synchronize timeout work during SQ teardown nvmet_auth_sq_free() cancels auth_expired_work with cancel_delayed_work(). If the work has already started, cancellation does not wait for the callback. Transport teardown can consequently free or reuse the queue containing struct nvmet_sq while nvmet_auth_expired_work() still accesses that SQ. Add a teardown-specific helper that synchronously drains the delayed work before freeing authentication state, and use it from nvmet_sq_destroy(). Keep the non-synchronous helper for in-band authentication state cleanup, where the SQ owner remains alive. | ||||
| CVE-2026-89899 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: cec: disable delayed work before freeing an interrupted transmit cec_transmit_msg_fh() drops adap->lock to wait for a blocking transmit in wait_for_completion_killable(). If that wait is interrupted by a signal, cancel_delayed_work_sync() can run before the CEC kthread arms the reply timeout via schedule_delayed_work(&data->work) in cec_transmit_done_ts(). The work is then armed after the cancel, and the data is freed with its delayed_work still pending: ODEBUG: free active (active state 0) object: ... hint: cec_wait_timeout Use disable_delayed_work_sync(): it cancels the work and disables it, so the later schedule_delayed_work() becomes a no-op and the work cannot be re-armed. The data is freed right after, so it need not be re-enabled. | ||||
| CVE-2026-89990 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ceph: lock mutex in ceph_mds_check_access() MDS session OPEN handling replaces mdsc->s_cap_auths under mdsc->mutex, freeing the previous array and its strings. ceph_mds_check_access() traverses this array without holding the mutex. A concurrent session reopen can therefore free the array while it is being inspected, resulting in a use-after-free like this: Unable to handle kernel paging request at virtual address 003aaad64b2c8bb9 [...] Internal error: Oops: 0000000096000004 [#1] SMP Modules linked in: CPU: 56 UID: 2953037534 PID: 1253231 Comm: php-cgi8.4 Not tainted 6.18.45-i2-ampere #1146 NONE [..] pc : ceph_mds_check_access+0xd4/0x550 lr : ceph_mds_check_access+0xc8/0x550 [...] Call trace: ceph_mds_check_access+0xd4/0x550 (P) ceph_atomic_open+0x138/0xbe8 path_openat+0xa24/0xfa8 do_filp_open+0x94/0x158 do_sys_openat2+0x88/0xf8 | ||||
| CVE-2026-89913 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each() and dereferences the returned struct vgic_irq in the loop body without holding a reference on the LPI. The xarray iterator only provides temporary RCU coverage while looking up the current entry. That is not sufficient for this loop body, which reads fields from struct vgic_irq and performs guest memory accesses before the iteration completes. A concurrent path can trigger this race: the irqfd cached injection path (vgic_its_inject_cached_translation) obtains a transient LPI reference via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex, config_lock, or its_lock. If guest ITS DISCARD then drops the cache and ITE references under its_lock, the transient inject reference may become the final one. When vgic_put_irq() drops it, the LPI is erased from lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables() may still hold a stale pointer obtained from the xarray iterator and dereference it after the RCU grace period completes. Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes a stable reference, and dropping it with vgic_put_irq() on all paths. This matches the pattern already used by other lpi_xa iterators in the vgic ITS code. | ||||
| CVE-2026-89875 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: ti: vpe: quiesce overflow recovery before freeing streams The VIP overflow recovery worker is armed from the hardirq handler when a FIFO overflow is detected, and the list-complete path looks the stream up through the VPDMA list private pointer. Both keep touching stream, port and device state; the recovery worker also resets the parser and VPDMA, repopulates the descriptor list, and re-enables the per-list IRQs. vip_stop_streaming() masks and clears the per-list IRQs, but it neither synchronizes the hardirq handler nor disables recovery_work. An overflow IRQ that has already queued recovery_work, or a list-complete IRQ in flight when the stream is torn down, can therefore still dereference the stream after its resources are released: the descriptor list is freed by vip_release_stream() on file release, and the stream itself by free_stream() on unbind/remove. Drain the recovery worker and the IRQ handler at both teardown points through a shared vip_quiesce_stream() helper, before any stream-owned resource is released. disable_work_sync() cancels pending recovery_work, drains a running instance, and raises its disable depth, so a subsequent schedule_work() issued by a racing IRQ handler is rejected at the workqueue scheduler: recovery_work cannot be requeued after disable_work_sync() takes effect. The worker may still re-enable the per-list IRQs before disable_work_sync() returns; disable_irqs() then masks those sources and synchronize_irq() waits for any in-flight handler that still dereferences stream state. In vip_stop_streaming() the helper runs before the parser is stopped, since a worker drained by disable_work_sync() may re-enable the parser before exiting and would otherwise undo the stop. recovery_work is created disabled and enabled in vip_start_streaming() before IRQs, pairing the enable with the teardown disable across the streaming lifecycle. This issue was found by an in-house static analysis tool and confirmed by manual code review. | ||||
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-09-18 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89880 | 1 Linux | 2 Kernel, Linux Kernel | 2026-09-18 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: release URBs and stream buffers on start_streaming() failure rtl2832_sdr_start_streaming() calls rtl2832_sdr_alloc_stream_bufs(), rtl2832_sdr_alloc_urbs() and rtl2832_sdr_submit_urbs() in sequence and shares a single err: label that only unlocks the mutex and returns. When alloc_urbs() succeeds but submit_urbs() fails, or when alloc_urbs() itself returns -ENOMEM after alloc_stream_bufs() has already succeeded, the URBs and/or the coherent DMA stream buffers stay allocated while streaming reports failure to vb2. Two latent defects follow on the next VIDIOC_STREAMON: 1) rtl2832_sdr_alloc_stream_bufs() unconditionally resets dev->buf_num to 0 and overwrites dev->buf_list[]/dev->dma_addr[], permanently leaking the coherent DMA memory allocated by the previous attempt. 2) rtl2832_sdr_alloc_urbs() never resets dev->urbs_initialized and only increments it. After a second successful pass urbs_initialized can exceed MAX_BULK_BUFS, so the subsequent rtl2832_sdr_free_urbs() walks from urbs_initialized - 1 down to 0 and reads past the end of dev->urb_list[], passing garbage pointers to usb_free_urb(). Mirror the teardown that stop_streaming() already performs: on the error path call rtl2832_sdr_free_urbs() and rtl2832_sdr_free_stream_bufs() before unlocking. Both helpers are idempotent (free_urbs kills and zeros urbs_initialized; free_stream_bufs is gated on URB_BUF and clears the buf_num counter), so partial-failure paths and the no-allocation paths remain safe. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-90005 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: samples/damon/wsse: handle damon_start() failure Patch series "samples/damon: handle damon_{start,stop}() failures". All DAMON sample modules are not correctly handling failures from damon_start(). Among those, mtier also has an additional problem for handling of damon_stop() failures. wsse and prcl also have a problem in their damon_call() failure handling. As a result, memory leaks, next DAMON operation disruptions, and use-after-free can happen. Fix those. Note that only the damon_start() failure caused issues can reliably be reproduced. Reproducing those issues require the admin permission, though. This patch (of 6): damon_sample_wsse_start() callers assume it will clean up resources when it fails. And the function does the cleanup for context buildup failures. However, it is not doing the cleanup for damon_start() failure. As a result, when damon_start() fails, it leaks the memory for DAMON context. Free the context in case of the failure to fix the issues. Note that the issue can reliably be reproduced because the module calls damon_start() in the exclusive mode. For example, $ sudo damo start $ echo $$ | sudo tee /sys/module/damon_sample_wsse/parameters/target_pid $ echo Y | sudo tee /sys/module/damon_sample_wsse/parameters/enabled $ sudo cat /proc/allocinfo | grep damon_new_ctx Because the first command is running another DAMON instance, the third command fails the damon_start() call because the new DAMON instance cannot exclusively run. And without this fix, by repeating the third and the fourth commands above, we can show the memory consumption is only increasing due to the leaks. It requires the sudo permission though. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-90006 | 1 Linux | 1 Linux Kernel | 2026-09-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: handle damon_stop() failure damon_sample_mtier_stop() assumes its damon_stop() call will always successfully stops the two DAMON contexts. Hence it deallocates the two DAMON contexts after the damon_stop() call. However, if a given context is already stopped, damon_stop() fails and returns an error while letting the DAMON contexts that have not yet stopped keep running. This kind of unexpected early DAMON context stops could happen due to memory allocation failures in kdamond_fn(). Because damon_sample_mtier_stop() just deallocates all DAMON contexts with damon_target and damon_region objects that are linked to the contexts, the execution of the unstopped DAMON context (kdamond) ends up using the memory that freed (use-after-free). Fix the issue by separating the damon_stop() to be invoked per context. Note that DAMON_SYSFS also allows multiple DAMON contexts execution. But, it calls damon_stop() for each context one by one. Hence this issue is only in mtier. For the long term, it would be better to refactor damon_stop() to always ensure stopping all contexts regardless of the failures in the middle. Make this fix in the current way, though, to keep it simple and easy to backport. I will do the refactoring later. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-90029 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: realtek_cr: fix use-after-free on disconnect realtek_cr_destructor() calls timer_delete() before the chip containing the timer is freed. The timer callback may still be running and can rearm itself, resulting in a use-after-free. Use timer_shutdown_sync() to wait for the callback and prevent further rearming. Do this unconditionally because ss_en may be changed after the timer is armed. Move timer_setup() into init_realtek_cr() so the timer is initialized before any failure path can invoke the destructor. Found by static analysis. | ||||
| CVE-2026-90040 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Forcefully invalidate SNP VMSA if its backing gmem page is zapped Wire up a gmem_invalidate_range() call for SNP VMs, and use it to force vCPUs to reload/recheck their guest-provided VMSA if the backing gmem page is being invalidated, e.g. is being PUNCH_HOLE'd. Use the same core logic to handle invalidations as VMX does for the APIC-access page, as the two concepts are nearly identical: shove the physical address of a page into the vCPU's control structure: 1. Snapshot the invalidation sequence counter 2. Grab the pfn (from guest_memfd in this case) 3. Acquire mmu_lock for read 4. Re-request reload if retry is needed, otherwise commit the change. Note, the re-request action in #4 is necessary as KVM's retry logic is fuzzy, i.e. can get false positives. If the guest_memfd page has been dropped, at some point a subsequent reload will fail to get a PFN from guest_memfd, and KVM will fail KVM_RUN. If the retry was due to a false positive, KVM will retry until there are no relevant MMU notifier events (and will retry in the "outer" loop, i.e. will drop locks and resched as needed). Note #2! Take care to invalidate the VMSA when a relevant memslot is DELETED or MOVED, as invalidations in response to PUNCH_HOLE are predicated on memslot bindings (KVM doesn't know what GFN range(s) to invalidate without a binding). And more importantly, the VMSA mapping requires a memslot, i.e. must be invalidated if its memslots disappears, regardless of the state of the underlying guest_memfd inode. Failure to invalidate the vCPU's control.vmsa_pa (which is checked by pre_sev_run()) can prevent KVM from properly freeing the page as firmware will reject the RMPUPDATE to reclaim the page with FAIL_INUSE if the vCPU is actively running, i.e. if VMSA page is in-use. That in turn leads to an RMP #PF on the next use, as the page will still be assigned to the SNP VM. SEV-SNP: RMPUPDATE failed for PFN 78d198, pg_level: 1, ret: 3 SEV-SNP: PFN 0x78d198, RMP entry: [0xfff0000000144001 - 0x000000000000000f] CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 Call Trace: <TASK> dump_stack_lvl+0x54/0x70 rmpupdate+0x12c/0x140 rmp_make_shared+0x3b/0x60 sev_gmem_invalidate+0xe0/0x170 [kvm_amd] delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> ------------[ cut here ]------------ SEV: Failed to update RMP entry for PFN 0x78d198 error -14 WARNING: arch/x86/kvm/svm/sev.c:5160 at sev_gmem_invalidate+0x126/0x170 [kvm_amd], CPU#3: sev_snp_vmsa_pu/31345 CPU: 3 UID: 0 PID: 31345 Comm: sev_snp_vmsa_pu Tainted: G U O Tainted: [U]=USER, [O]=OOT_MODULE Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.86.0-102 01/25/2026 RIP: 0010:sev_gmem_invalidate+0x12b/0x170 [kvm_amd] Call Trace: <TASK> delete_from_page_cache_batch+0x1d8/0x220 truncate_inode_pages_range+0x120/0x3d0 kvm_gmem_fallocate+0x19a/0x270 [kvm] vfs_fallocate+0x1bc/0x1f0 __x64_sys_fallocate+0x48/0x70 do_syscall_64+0x10a/0x480 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x496c7e </TASK> irq event stamp: 20689 hardirqs last enabled at (20699): [<ffffffff8e76092c>] __console_unlock+0x5c/0x60 hardirqs last disabled at (20708): [<ffffffff8e760911>] __console_unlock+0x41/0x60 softirqs last enabled at (20722): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 softirqs last disabled at (20717): [<ffffffff8e6cd74e>] __irq_exit_rcu+0x7e/0x140 ---[ end trace 0000000000000000 ]--- BUG: unable to handle page fault for address: ffff99 ---truncated--- | ||||
| CVE-2026-89983 | 1 Linux | 1 Linux Kernel | 2026-09-17 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: fix debugfs UAF on adapter removal i2c_del_adapter() frees the adapter's debugfs directory before it unregisters the adapter device, but the new_device sysfs attribute stays writable until device_del(). A write racing with removal still reaches i2c_device_probe(), which passes the freed adap->debugfs to debugfs_create_dir() as the new client's parent: BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430 Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090 lookup_noperm_common+0x407/0x430 simple_start_creating+0x9c/0x110 debugfs_start_creating+0xdb/0x1a0 debugfs_create_dir+0x24/0x350 i2c_device_probe+0x814/0xbf0 It's technically possible to create a client after i2c_deregister_clients has run. That client will never be unregistered and make wait_for_completion hang. Close the window by removing the new_device attribute at the start of i2c_del_adapter(). device_remove_file() will drain any clients left. | ||||
| CVE-2026-84558 | 1 Apple | 1 Macos | 2026-09-17 | 5.5 Medium |
| A double free issue was addressed with improved memory management. This issue is fixed in macOS Golden Gate 27. An app may be able to cause unexpected system termination. | ||||
| CVE-2026-43808 | 1 Apple | 6 Ios And Ipados, Ipados, Iphone Os and 3 more | 2026-09-17 | 5.5 Medium |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, watchOS 26.6. An app may be able to cause unexpected system termination. | ||||
| CVE-2026-92005 | 1 Mozilla | 1 Firefox | 2026-09-17 | 5.3 Medium |
| Use-after-free in the Audio/Video: Web Codecs component. This vulnerability was fixed in Firefox 156, Firefox ESR 140.16, Firefox ESR 153.3, Thunderbird 156, Thunderbird 140.16, and Thunderbird 153.3. | ||||
| CVE-2026-93373 | 2026-09-17 | N/A | ||
| Use after free in Extensions in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to execute arbitrary code outside the sandbox via a crafted Chrome extension. (Chromium security severity: High) | ||||
| CVE-2026-93382 | 2026-09-17 | N/A | ||
| Use after free in PDFium in Google Chrome prior to 153.0.8010.52 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||