Export limit exceeded: 410515 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410515 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98562 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: libwx: fix races in Tx timestamp handling wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary worker and the timestamp cleanup paths. The WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from submitting timestamp requests, but does not serialize the worker against cleanup. As a result, wx_ptp_clear_tx_timestamp() can free an skb after wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may then pass the freed skb to skb_tstamp_tx() and release the same reference again. The cleanup path may also clear the in-progress bit while the worker is still processing the old skb. This allows the Tx path to publish a new skb which the worker can subsequently overwrite with NULL, leaking its reference. Add a dedicated spinlock to protect publication and consumption of the Tx timestamp skb. Detach the skb and clear the in-progress bit while holding the lock, then deliver the timestamp and release the skb after dropping it. Use the same locked cleanup in the quiesce path, but keep the detach there free of register accesses: quiesce runs during PCIe error recovery, where MMIO is not reliable, and it deliberately did not touch the device before. The lock is taken with interrupts disabled, because netpoll can call ndo_start_xmit() with hard interrupts already off. When handling a Tx DMA mapping failure, keep the transmit path reference until after comparing the skb under the lock. This prevents skb address reuse from making the error path mistake a newer timestamp request for the failed one. | ||||
| CVE-2026-98569 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ip_gre: Reject enabling collect metadata through changelink ipgre_netlink_parms() can enable collect_md on an existing GRE, GRETAP or ERSPAN device. Unlike newlink, changelink does not enforce metadata tunnel uniqueness. Converting a non-metadata device can therefore replace the metadata receive entry for another device of the same type in the same netns. Deleting either device then clears the shared entry, breaking metadata receive lookup for the surviving device. If parameter validation fails after collect_md is set, deleting the modified device can also clear an entry it never owned. Reject enabling metadata mode in both changelink callbacks before any encapsulation or tunnel parameters are modified. Allow requests that repeat the metadata attribute on an existing metadata device. | ||||
| CVE-2026-98570 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ipv6: keep room for the mac header in dst_dev_overhead() The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as the length they are about to push plus dst_dev_overhead(), then push the new headers and rebuild the mac header below them with skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom, but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device, 16 bytes for plain Ethernet. Where the mac header is longer than that, as it is on ingress through a VLAN device with reorder_hdr off, the rebuild runs out of room: skb_set_mac_header(skb, -skb->mac_len) computes a negative offset, stores it unchecked in the u16 skb->mac_header, and the memmove that follows writes skb->mac_len bytes about 64 KB past skb->head. Forwarding plain ping6 traffic through such a device reproduces it on all five seg6 encapsulation modes and on the rpl and ioam6 inline paths; skb->mac_header comes back as 65534 on a 704-byte head. Return the larger of the two. The helper already returns skb->mac_len when it has no dst, so this only makes the other branch agree, and it covers every caller rather than each call site in turn. | ||||
| CVE-2026-98607 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98623 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/clk: fix list cursor use after loop in nvkm_clk_ustate_update If list_for_each_entry() exits without hitting a break then "pstate" is not a valid pstate pointer. Introduce a "found" variable instead. The check is reachable from userspace: nvkm_clk_ustate_update() takes the pstate id straight from the 'pstate' debugfs file, so requesting an id that is not in clk->states - or any id at all when the perf tables are broken and the list is empty - makes the pstate->pstate != req test dereference the list head cast to a struct nvkm_pstate, which is an out-of-bounds read. [Francesco: rebased on drm-misc-next, expanded the commit message] | ||||
| CVE-2026-98631 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: xsk: Use a 32-bit compare in xsk_map_gen_lookup xsk_map_gen_lookup() loads a u32 key and compares it with max_entries using BPF_JMP_IMM. BPF immediates are sign-extended to 64 bits, so a max_entries value of 0x80000000 or higher becomes a threshold larger than every zero-extended 32-bit key. An out-of-range index then skips the bounds check and the generated lookup reads past xsk_map[]. Compare with BPF_JMP32_IMM so the check stays in 32-bit unsigned range. | ||||
| CVE-2026-98722 | 1 Linux | 1 Linux Kernel | 2026-10-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: block2mtd: Fix divide error when erase_size is zero The erase size is parsed from the "block2mtd" module parameter and can be set to zero. add_device() then evaluates if (size % erase_size) with a zero divisor, which triggers a divide error: divide error: 0000 [#1] PREEMPT SMP PTI RIP: 0010:add_device drivers/mtd/devices/block2mtd.c:296 [inline] RIP: 0010:block2mtd_setup2+0x592/0xda0 drivers/mtd/devices/block2mtd.c:459 Call Trace: block2mtd_setup+0x27/0xe0 drivers/mtd/devices/block2mtd.c:476 param_attr_store+0x214/0x310 kernel/params.c:589 module_attr_store+0x65/0x90 kernel/params.c:904 kernfs_fop_write_iter+0x3a4/0x540 fs/kernfs/file.c:345 ... Reject a zero erase size before performing the modulo operation so the existing "erasesize must be a divisor of device size" error path reports the invalid argument and frees the device. | ||||
| CVE-2026-89302 | 1 Wordpress-extensions | 1 Post Voting System | 2026-10-19 | 8.6 High |
| The Post Voting System WordPress plugin through 1.0 does not properly sanitize and escape a parameter before using it in a SQL query, allowing unauthenticated users to perform SQL injection attacks. | ||||
| CVE-2026-111886 | 2 Phpmyfaq, Thorsten | 2 Phpmyfaq, Phpmyfaq | 2026-10-19 | 6.5 Medium |
| phpMyFAQ from 4.2.0-alpha.2 before 4.2.0-beta lacks brute-force lockout in the removeTwofactorConfig() 2FA removal endpoint, allowing authenticated attackers to guess TOTP codes without limit. Attackers holding a hijacked session and CSRF token can repeatedly POST guesses to /api/user/remove-twofactor to permanently disable the victim's 2FA. | ||||
| CVE-2026-98480 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: trf7970a: power down on startup RX gain failure trf7970a_startup() powers up the device before applying the optional RX gain reduction. If the register read or write fails, it returns without undoing that power-up. Probe's unwind only drops the separate regulator references acquired by probe, leaving the additional VIN enable from startup unbalanced. The system resume caller also has no power-down on this error. Call trf7970a_power_down() before returning the RX gain error to deassert the enable GPIOs, release the startup VIN reference and restore the powered-off state. Runtime PM has not been enabled yet, so the full shutdown helper is not appropriate here. Preserve the original SPI error. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98482 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: drop truncated I/RR/RNR PDUs in nfc_llcp_recv_hdlc() nfc_llcp_recv_hdlc() reads the sequence byte skb->data[2], via nfc_llcp_ns()/nfc_llcp_nr(), before any length check. The receive path only guarantees the two-byte LLCP header -- __nfc_llcp_recv() checks it with pskb_may_pull() and nfc_llcp_recv_agf() admits two-byte inner PDUs -- so a two-byte I, RR or RNR PDU reads one byte of uninitialised skb tailroom. The byte becomes N(R)/N(S); a peer can already set those with a well-formed PDU, so this is acting on uninitialised memory, not new peer control. Guard the read with pskb_may_pull(), as commit 95674f506c63 ("nfc: llcp: reject PDUs shorter than the LLCP header") did for the two-byte header, so the sequence byte is present and linear before it is read. RR and RNR PDUs are LLCP_HEADER_SIZE + LLCP_SEQUENCE_SIZE bytes and an I PDU is longer, so no valid frame is rejected; a truncated PDU is malformed, so return without a DM reply. | ||||
| CVE-2026-98483 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: fix use-after-free in nfc_get_local_general_bytes Commit 6709d4b7bc2e ("net: nfc: Fix use-after-free caused by nfc_llcp_find_local") attempted to fix a use-after-free (UAF) issue by invoking nfc_llcp_local_put(local) after accessing local->gb. However, if the reference count drops to zero, local is freed immediately, leading to a use-after-free when callers access the returned pointer. Alternative approaches using dynamic allocation (e.g. kmemdup) introduced memory leaks because callers consistently treat the returned pointer as borrowed memory. Fix this properly by refactoring nfc_llcp_general_bytes() and nfc_get_local_general_bytes() to accept a caller-provided output buffer (out_gb) and its maximum length (gb_max_len). The general bytes are safely copied into out_gb before calling nfc_llcp_local_put(local), ensuring safe lifetime management without ownership transfer complications. Update all callers across drivers (microread, pn533, pn544, st21nfca, digital_dep, and nci) to provide their own destination buffers and pass them to nfc_get_local_general_bytes(). | ||||
| CVE-2026-98487 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mdb: restart port group walk after deletion br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through br_multicast_sg_del_exclude_ports() and unlink other port groups. If the cursor points into one of those groups, the next iteration dereferences a stale cursor and can leave mp->ports pointing at freed memory. A following RTM_GETMDB exposes the dangling pointer: BUG: KASAN: slab-use-after-free in br_mdb_dump Read of size 8 br_mdb_dump rtnl_mdb_dump rtnl_dumpit netlink_dump Reset the cursor to mp->ports after every deletion. The deletion removes at least the selected group, so the restarted walk always makes progress. | ||||
| CVE-2026-98491 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry In a case where skb with an unconfirmed ct entry gets cloned, we may end up committing both but with different sets of extensions. The series of events: 1. The first clone wants to commit and runs the helpers wiring up the extension pointer into the expectation list. 2. Then it looses the confirmation keeping the entry unconfirmed. 3. Second clone now wants to commit labels and adds the new extension for that breaking the pointer in the expectation list causing UAF on the destruction path later. While this is possible to trigger, there should be no practical network pipeline where committing both clones without modifications into the same zone is needed. So, let's just reset the entry in case for some reason we got an skb with a shared one during commit. This doesn't affect any known use cases, but avoids any potential problems with sharing and modification of the unconfirmed ct entry. The fixes tag points to the introduction of helpers, since that's the main UAF trigger for the sharing. | ||||
| CVE-2026-98542 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/cpuset: Return PERR_NOCPUS in remote_partition_enable() on subpartitions_cpus conflict When a remote partition is created underneath an existing local partition via a non-partition (PRS_MEMBER) intermediate cgroup, update_prstate() sees parent->partition_root_state == PRS_MEMBER and calls remote_partition_enable(). Commit 86888c7bd117 ("cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs") replaced the cpumask_intersects(tmp->new_cpus, subpartitions_cpus) error check in remote_partition_enable() with WARN_ON_ONCE(). As a result, remote_partition_enable() emits a warning and proceeds to enable the remote partition on CPUs that are already owned by the ancestor local partition in subpartitions_cpus. This can be reproduced on Linux 7.3.0-rc3 with: mkdir -p /tmp/cg1 mount -t cgroup2 none /tmp/cg1 echo "+cpuset" > /tmp/cg1/cgroup.subtree_control mkdir /tmp/cg1/A echo 1 > /tmp/cg1/A/cpuset.cpus echo 1 > /tmp/cg1/A/cpuset.cpus.exclusive echo root > /tmp/cg1/A/cpuset.cpus.partition echo "+cpuset" > /tmp/cg1/A/cgroup.subtree_control mkdir /tmp/cg1/A/B echo 1 > /tmp/cg1/A/B/cpuset.cpus echo 1 > /tmp/cg1/A/B/cpuset.cpus.exclusive echo "+cpuset" > /tmp/cg1/A/B/cgroup.subtree_control mkdir /tmp/cg1/A/B/D echo 1 > /tmp/cg1/A/B/D/cpuset.cpus echo 1 > /tmp/cg1/A/B/D/cpuset.cpus.exclusive echo root > /tmp/cg1/A/B/D/cpuset.cpus.partition which triggers: WARNING: kernel/cgroup/cpuset.c:1594 at remote_partition_enable+0x1c1/0x300 and leaves both /tmp/cg1/A and /tmp/cg1/A/B/D as active root partitions claiming exclusive CPU 1. Fix this by returning PERR_NOCPUS when tmp->new_cpus intersects subpartitions_cpus in remote_partition_enable(), matching the error code used by remote_cpus_update() for the same subpartitions_cpus conflict, and add a regression test case to tools/testing/selftests/cgroup/test_cpuset_prs.sh. Tested in QEMU on Linux 7.3.0-rc3 using the reproducer above and tools/testing/selftests/cgroup/test_cpuset_prs.sh. | ||||
| CVE-2026-98604 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when learning local endpoint struct ovpn_bind is published through peer->bind with RCU, but local endpoint learning updates bind->local in place under peer->lock. UDP TX reads the field without that lock. In particular, a concurrent IPv6 update can therefore result in a torn address read. Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning a new local endpoint, just as a remote endpoint change does. Preserve the current remote address and reset the dst cache only after the new bind has been published successfully. Track remote endpoint changes separately so that float notification and transport-address rehashing remain limited to actual peer floats. | ||||
| CVE-2026-98616 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open(). | ||||
| CVE-2026-98664 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16400: fix unprotected debugfs reads adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too. | ||||
| CVE-2026-98685 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via clone range cifs_remap_file_range() discarded the pagecache only for the folios overlapping the destination region, so when a clone extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Start the discard at the smaller of fstart and the old EOF. i_size is still old here, so nothing past the old EOF is flushed to the server. | ||||
| CVE-2026-98783 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device platform_device_register_data() can fail and return an ERR_PTR, but the return value is used without checking, leading to an invalid pointer being stored in ddp_comp[].dev and passed to component_match_add() and mtk_ddp_comp_init(), which could result in a kernel crash. Add an IS_ERR() check to jump to the error handling path on failure. | ||||