Export limit exceeded: 399617 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399617 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97478 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: virt: acrn: Fix irqfd use-after-free during eventfd shutdown acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free the same struct hsm_irqfd: CPU0 CPU1 ---- ---- eventfd_release() wake_up_poll(EPOLLHUP) hsm_irqfd_wakeup() queue_work(&irqfd->shutdown) acrn_irqfd_deassign() hsm_irqfd_shutdown() list_del_init() eventfd_ctx_remove_wait_queue() eventfd_ctx_put() kfree(irqfd) hsm_irqfd_shutdown_work() container_of(work, ..., shutdown) irqfd->vm <-- use-after-free The deassign path freed the irqfd while a shutdown work item was already queued by EPOLLHUP (or vice versa), so the work item could resurrect a dangling pointer through container_of(). Switch to the lifetime model used by KVM irqfds: - Deassign/deinit only deactivate the irqfd: remove it from vm->irqfds under irqfds_lock and queue the cleanup work. - hsm_irqfd_shutdown_work() becomes the sole owner that unhooks the eventfd waitqueue entry, drops the eventfd reference and frees the irqfd. - A new HSM_IRQFD_FLAG_SHUTDOWN bit guarded by test_and_set_bit() ensures the cleanup work is queued at most once, no matter how many of {EPOLLHUP, deassign, deinit} fire concurrently. This is safe to call from the waitqueue callback, which runs with wqh->lock held and IRQs disabled and therefore cannot take irqfds_lock. - acrn_irqfd_deassign() flushes vm->irqfd_wq before returning so the eventfd is fully detached on return. acrn_irqfd_deinit() deactivates every irqfd, flushes the workqueue and only then destroys it, so no path can queue_work() onto a torn-down workqueue. - acrn_irqfd_assign() now installs the eventfd waitqueue entry and publishes the irqfd to vm->irqfds under irqfds_lock, so the irqfd is never visible to deassign/deinit before its waitqueue entry is in place, and any EPOLLHUP that fires in the assign window queues cleanup work that blocks on irqfds_lock until publication is done. | ||||
| CVE-2026-97477 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/counter: Fix num_counters leak on bind_qp failure in alloc_and_bind() When __rdma_counter_bind_qp() fails in alloc_and_bind(), the error path jumps to err_mode which frees the counter without decrementing port_counter->num_counters. The only place that decrements is rdma_counter_free(), which is unreachable since the counter was never successfully bound. This leak accumulates across repeated failures, permanently preventing the port from switching to AUTO mode (-EBUSY in __counter_set_mode()) and blocking the MANUAL→NONE auto-revert in rdma_counter_free(). When the mode was NONE before the call, the MANUAL mode set by __counter_set_mode() also leaks since the revert logic is never reached. Add an err_bind label between the num_counters increment and the existing err_mode label. It decrements num_counters and mirrors the MANUAL→NONE revert from rdma_counter_free(), ensuring the port state is fully restored on bind failure. | ||||
| CVE-2026-97476 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: rds: filter RDS_INFO_* getsockopt by caller's netns The RDS_INFO_* family of getsockopt(2) options reads several file-scope global lists that are not per-netns: rds_sock_info / rds6_sock_info, rds_sock_inc_info / rds6_sock_inc_info -> rds_sock_list rds_tcp_tc_info / rds6_tcp_tc_info -> rds_tcp_tc_list rds_conn_info / rds6_conn_info, rds_conn_message_info_cmn (for the *_SEND_MESSAGES and *_RETRANS_MESSAGES variants), rds_for_each_conn_info (for RDS_INFO_IB_CONNECTIONS) -> rds_conn_hash[] The handlers do not filter by the caller's network namespace. rds_info_getsockopt() has no netns or capable() check, and rds_create() has no capable() check, so AF_RDS is reachable from an unprivileged user namespace. As a result, an unprivileged caller in a fresh user_ns plus netns can read the bound address and sock inode of every RDS socket on the host, the peer address of incoming messages on every RDS socket on the host, the peer address and TCP sequence numbers of every rds-tcp connection on the host, and the peer address and RDS sequence numbers of every RDS connection on the host. The rds-tcp transport is reachable from a non-initial netns (see rds_set_transport()), so a one-shot init_net gate at rds_info_getsockopt() would deny legitimate per-netns visibility to rds-tcp callers. Instead, filter at each handler by comparing the netns of the caller's socket to the netns of the list entry, or to rds_conn_net(conn) for connection paths. Only copy entries whose netns matches the caller. Counters (RDS_INFO_COUNTERS) are aggregate statistics and remain global. Reproducer (KASAN VM, rds and rds_tcp loaded): an AF_RDS socket binds 127.0.0.1:4242 in init_net as root. A child process enters a fresh user_ns plus netns and opens AF_RDS there, then calls getsockopt(SOL_RDS, RDS_INFO_SOCKETS). Before this change, the child sees the init_net socket. After this change, the child sees zero entries. Drop the rds_sock_count, rds_tcp_tc_count, and rds6_tcp_tc_count globals. v2 used them for the size precheck and lens->nr; v3 replaced the precheck with a per-ns count from a first pass over the list, so the globals have no remaining readers. The matching increments and decrements in rds_create()/rds_destroy_sock() and rds_tcp_set_callbacks()/rds_tcp_restore_callbacks() go away with them. Reported by the kernel test robot under clang W=1. | ||||
| CVE-2026-97475 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/tegra/soctherma: Switch to devm cooling device registration Use devm_thermal_of_cooling_device_register() to simplify resource management and avoid manual cleanup in error paths. As a side effect this change has the benefit of solving an existing issue. Before, the function tegra_soctherm_remove() only called debugfs_remove_recursive() and never called thermal_cooling_device_unregister() for any of the cooling devices registered here. After the driver removal, the thermal framework's cdev list would still hold references to thermal_cooling_device objects whose devdata pointer (ts) pointed to memory already freed by the platform device's devm cleanup. With this change, the cooling device is unregistered when the driver is removed, thus fixing the issue above. | ||||
| CVE-2026-97474 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: purge async notifications upon nic error This fixes a kernel panic in reconfig failure: 1. we have a BSS connection 2. we have a NAN connection 3. FW error occurs 4. reconfig restores the BSS connection 5. however, restoring the NAN connection fails due to a FW error. 6. erroneously, ieee80211_handle_reconfig_failure is called and marks all interfaces as not-in-driver (will be fixed in a different patch). 7. mac80211 frees the links of the BSS connection but doesn't tell the driver about that, as it thinks that this vif is not in the driver. 8. in ieee80211_stop_device, *ALL* wiphy works are getting flushed (erroneously?) 9. Therefore, async_handlers_wk is being executed, processing the statistics notification that was received after we restored the BSS connection. 10. the notification handler dereferences fw_id_to_bss_conf[id], which is now a dangling pointer, as mac80211 already freed this link in (7). 11. On the first access to one of the links fields, we panic. While this can and should be fixed by removing the call to ieee80211_handle_reconfig_failure in (6), it is also not a good idea to carry and maybe handle notifications from a dead FW. We do purge the notifications when we stop the FW, but in reconfig failure we stop the FW too late, after the notifications are processed. In addition, async_handlers_wk can always be scheduled before the reconfig work. Purge the notifications immediately when transport notifies about a nic error. | ||||
| CVE-2026-97473 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powercap: intel_rapl: Fix memory leak in rapl_add_package_cpuslocked() When topology_physical_package_id()/topology_logical_die_id() returns a negative value, rapl_add_package_cpuslocked() returns ERR_PTR(-EINVAL) directly without freeing the rapl_package structure that was just allocated by kzalloc_obj(), leaking memory on every failed package addition. Use the existing err_free_package label so that the allocation is released on the error path. | ||||
| CVE-2026-97472 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: fix temp address generation after prefix deprecation When a router temporarily deprecates an IPv6 prefix (either by sending a Router Advertisement with Preferred Lifetime = 0 or by letting the lifetime expire) and later restores it, the kernel permanently loses its ability to generate temporary privacy addresses (RFC 8981) for that prefix. This happens because the address worker attempts to generate a replacement temporary address when the current one nears expiration. As the base prefix is deprecated already, the generation fails after marking the temporary address as already having spawned a replacement (ifp->regen_count++). When the router eventually restores the prefix, the temporary address becomes active again. However, once it naturally expires, the address worker sees this temporary address already tried to generate one and skips the regeneration. Fix the issue by resetting the regen_count check of the latest temp address generated for the prefix updated by the incoming RA. | ||||
| CVE-2026-97456 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix condition check in acpi_ps_parse_loop() Fix condition check for AML_ELSE_OP in acpi_ps_parse_loop() to prevent out-of-bounds access. | ||||
| CVE-2026-97455 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix use-after-free in acpi_ds_terminate_control_method() Fix use-after-free issue in acpi_ds_terminate_control_method() by clearing references to method locals and arguments. | ||||
| CVE-2026-97451 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix integer overflow in acpi_ex_opcode_3A_1T_1R() (mid_op) Add overflow check for Index + Length to prevent integer overflow when calculating the truncation length. This prevents negative size parameter being passed to memcpy(). | ||||
| CVE-2026-97448 | 1 Linux | 1 Linux Kernel | 2026-09-28 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPICA: Add validation for node in acpi_ns_build_normalized_path() Add validation for node in acpi_ns_build_normalized_path() to prevent use-after-free vulnerabilities. | ||||
| CVE-2026-49076 | 2 Jetimpex Inc., Wordpress | 2 Jetengine, Wordpress | 2026-09-28 | 9.3 Critical |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Crocoblock JetEngine jet-engine allows Blind SQL Injection.This issue affects JetEngine: from n/a through 3.8.9.1. | ||||
| CVE-2026-55373 | 1 Academysoftwarefoundation | 1 Openexr | 2026-09-28 | 6.2 Medium |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions prior to 3.2.10, 3.3.12, and 3.4.13 contain an infinite-loop vulnerability in SampleCountChannel. The helper roundListSizeUp() rounds a sample-list size up to the next power of two using repeated unsigned left shifts, which terminates for normal values but fails for UINT_MAX: the sequence reaches 0x80000000, and the next left shift wraps the 32-bit value to 0. Because 0 remains less than UINT_MAX, the loop never progresses and never exits. The bug is reachable through public OpenEXRUtil APIs, either by editing the sample-count buffer through SampleCountChannel::Edit (whose destructor calls endEdit()) or by calling SampleCountChannel::set(x, y, UINT_MAX) on a valid pixel. This issue has been fixed in versions 3.2.10, 3.3.12, and 3.4.13. | ||||
| CVE-2026-101006 | 1 Frappe | 1 Hr | 2026-09-28 | 4.3 Medium |
| A flaw has been found in Frappe HR up to 16.15.0. This vulnerability affects the function get_expense_claims/get_shift_requests/get_attendance_requests of the file hrms/api/__init__.py of the component Permission Validation. This manipulation of the argument employee causes incorrect authorization. Remote exploitation of the attack is possible. The vendor replied: "This issue has already been reported by another individual, and based on that, we have fixed it." | ||||
| CVE-2026-101000 | 1 Netcore | 1 Nbr100v2 | 2026-09-28 | 10 Critical |
| A vulnerability was determined in Netcore NBR100V2 1.3.240614.030928. This affects the function uci.apply of the file /usr/share/rpcd/acl.d/unauthenticated.json of the component ACL Handler. This manipulation of the argument section causes missing authorization. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-76198 | 1 Adobe | 3 C2pa, C2patool, Content Credentials Rust Sdk | 2026-09-28 | 5.5 Medium |
| CAI Content Credentials is affected by an Improper Input Validation vulnerability that could lead to arbitrary file system read. An attacker could exploit this vulnerability to access sensitive files and directories outside the intended access scope. Exploitation of this issue requires user interaction in that a victim must open a malicious file. | ||||
| CVE-2026-100907 | 1 Eyeplus | 1 Eyeplus | 2026-09-28 | 5.3 Medium |
| A flaw has been found in Eyeplus 57.0.0.0308. The impacted element is an unknown function of the file /snapshot of the component p2pcam Service. This manipulation causes information disclosure. The attack is possible to be carried out remotely. The exploit has been published and may be used. | ||||
| CVE-2026-15917 | 1 Drupal | 1 Drupal Core | 2026-09-28 | 4.7 Medium |
| Improper Neutralization of Input During Web Page Generation ("Cross-site Scripting") vulnerability in Drupal Drupal core allows Cross-Site Scripting (XSS). This issue affects Drupal core versions: from 11.3.0 to 11.3.14, from 11.4.0 to 11.4.4, from 0.0.0 to 11.2.*. | ||||
| CVE-2026-43958 | 1 Redhat | 4 Enterprise Linux, Enterprise Linux Eus, Rhel E4s and 1 more | 2026-09-28 | 7.8 High |
| A flaw was found in rrdcached, a component of rrdtool. A local attacker with access to a rrdcached socket can exploit a stack-based buffer overflow by sending an oversized CREATE request. This vulnerability can lead to a denial of service by crashing the daemon or potentially allow for arbitrary code execution, impacting the integrity and confidentiality of data. | ||||
| CVE-2026-82841 | 1 Wordpress-extensions | 1 Updraftplus | 2026-09-28 | 5.3 Medium |
| The UpdraftPlus: WP Backup & Migration Plugin WordPress plugin before 1.26.8, UpdraftPlus: WP Backup & Migration Plugin WordPress plugin before 2.26.8.26 does not have any capability check in a routine that outputs its stored remote storage settings into admin pages when the site is left in a particular post-migration state, allowing any authenticated user, such as a subscriber, to retrieve the credentials of the configured backup destinations, such as passwords and secret keys. | ||||