Export limit exceeded: 50739 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50739 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90199 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: reject out-of-range evcn in mi_enum_attr() In mi_enum_attr(), the start/end VCN validation for non-resident attributes is: if (svcn > evcn + 1) goto out; When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn passes the check. For evcn values close to U64_MAX (but not equal to it) the right-hand side is still a meaningless near-wrap upper bound, so a malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass mi_enum_attr() unrejected. VCN (virtual cluster number) is a cluster index, so any valid evcn is bounded by the volume's total cluster count, which ntfs3 holds in sbi->used.bitmap.nbits (set up in ntfs_init_from_boot() before any caller of mi_enum_attr() runs). Reject evcn values that fall outside this range. However, an empty non-resident attribute (no allocated clusters) is legitimately encoded with svcn == 0 and evcn == -1 (U64_MAX), e.g. via attr->nres.evcn = cpu_to_le64((u64)vcn - 1) with vcn == 0. That sentinel must keep passing, so exclude evcn == U64_MAX from the range check. The existing "svcn > evcn + 1" test still tolerates the sentinel ("0 > 0" is false) and continues to require svcn == 0 for it, while the range check rejects every other out-of-range evcn and thereby also defuses the "evcn + 1" wraparound. svcn does not need its own bound: once evcn < nbits, "svcn > evcn + 1" implies svcn <= nbits. [almaz.alexandrovich@paragon-software.com: fixed evcn check] | ||||
| CVE-2026-90398 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath11k_wmi_tlv_mac_phy_caps_parse(), kcalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct wmi_mac_phy_capabilities)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath11k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Compile tested only. | ||||
| CVE-2026-90425 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Require exactly one Stream ID for a vSID tegra241_vintf_init_vsid() maps a guest vSID to a single physical Stream ID taken from master->streams[0], and only warns when the device does not have exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Reject the mapping with -EOPNOTSUPP if master->num_streams is not one. | ||||
| CVE-2026-90203 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Squashfs: check block offset is not negative If a negative offset is read off disk (for example the offset into the decompressed fragment block), this will cause squashfs_copy_data() to perform an out of bounds access. Fix by checking if offset is negative, and returning 0. This matches existing behaviour where an offset beyond the block returns 0 bytes copied. To trigger this out of bounds access requires a crafted Squashfs filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be able to mount such a filesystem, but once mounted, an unprivileged user can trigger the out of bounds access by reading the crafted file with the negative offset. | ||||
| CVE-2026-90414 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject PDUs declaring more data than was received isert_recv_done() hands each received PDU to the opcode handlers without ever looking at wc->byte_len, the number of bytes the HCA actually placed in the receive descriptor. The handlers then copy that many bytes - the data-segment length the initiator declared in the BHS (ntoh24(hdr->dlength), via the derived unsol_data_len / imm_data_len) - out of the fixed-size descriptor: isert_handle_iscsi_dataout(): sg_copy_from_buffer(sg_start, sg_nents, isert_get_data(rx_desc), unsol_data_len); isert_handle_scsi_cmd(): sg_copy_from_buffer(cmd->se_cmd.t_data_sg, sg_nents, isert_get_data(rx_desc), imm_data_len); Because the declared length is never checked against wc->byte_len, an initiator can declare a data segment larger than the bytes it actually sent (and larger than the descriptor) and cause an out-of-bounds read of the receive buffer. Nothing upstream of isert closes this door: - __iscsit_check_dataout_hdr() bounds the inbound payload against conn_ops->MaxXmitDataSegmentLength (MXDSL) - a transmit parameter, used here for the inbound check. - iscsi_set_connection_parameters() sets ops->MaxXmitDataSegmentLength = ops->TargetRecvDataSegmentLength; and TARGETRECVDATASEGMENTLENGTH is absent from the min()-clamp list in iscsi_check_acceptor_state(), so the value the initiator declares is adopted verbatim (type range 512..16777215). The initiator effectively raises its own ceiling. - isert never clamps the negotiated value to its own fixed receive descriptor (ISER_RX_SIZE, 9216 bytes), so the target core's bound and the descriptor size are unrelated. The imm_data_len == data_len path is more than an over-read: it aliases the receive descriptor via sg_set_buf() and passes it to the backend as the data source for the SCSI WRITE, so an over-declared length causes heap contents past the descriptor to be written through the backend to the backing store. The backend is the victim of the oversized scatterlist isert hands it, not the cause; no read-back of the written bytes was demonstrated. Trigger: after login completes (full feature phase), an initiator that has declared a large TargetRecvDataSegmentLength and a FirstBurstLength that permits unsolicited/immediate data sends a PDU whose declared data-segment length exceeds what was received. With KASAN: BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 Read of size 4096 at addr ffff888109720800 by task kworker/1:0H/25 Workqueue: ib-comp-wq ib_cq_poll_work Call Trace: sg_copy_buffer+0x150/0x1c0 isert_recv_done+0xba6/0x2390 __ib_process_cq+0xe1/0x390 ib_cq_poll_work+0x46/0x150 isert_recv_done+0xba6 resolves to isert_handle_iscsi_dataout() (ib_isert.c:1160), inlined through isert_rx_opcode(). Validate wc->byte_len against the framing in isert_recv_done() before the PDU reaches any handler, and reinstate the connection if it is short. Because the test compares without subtracting the header length, it also rejects PDUs shorter than the iSER and iSCSI headers, which would otherwise be parsed out of stale descriptor contents. The login handler rejects PDUs shorter than ISER_HEADERS_LEN (commit 29e7b925ae6d ("IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN")) but does not bound the declared length either; that is fixed in the next patch. The data handlers had no length check at all. isert reads the data segment from a fixed offset: isert_get_data() returns the iSER header plus ISER_HEADERS_LEN and makes no adjustment for an AHS. The bytes the handlers touch are therefore exactly [ISER_HEADERS_LEN, ISER_HEADERS_LEN + dlength), and comparing that sum against wc->byte_len bounds precisely the region that is read. An AHS term would only make the test stricter without bounding anything furth ---truncated--- | ||||
| CVE-2026-90419 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nilfs2: prevent out-of-bounds read in super root block parsing super-root inode metadata size is trusted before nilfs_read_inode_common(). Reject super-root inode sizes whose computed on-disk footprint exceeds the filesystem block size. This prevents malformed filesystem images from making nilfs_read_inode_common() read past the end of the super-root block. [ryusuke: clarify the commit title] | ||||
| CVE-2026-91959 | 1 Freerdp | 1 Freerdp | 2026-09-20 | 6.5 Medium |
| FreeRDP before 3.31.0 contains a buffer over-read vulnerability in the rts_read_result function within the RPC gateway transport parser. Attackers can send a malicious BIND_ACK PDU with a truncated result entry to trigger an out-of-bounds read causing process abort. | ||||
| CVE-2026-91836 | 1 Openclaw | 1 Clawscan | 2026-09-20 | 2.8 Low |
| A flaw has been found in OpenClaw ClawScan up to 0.1.6. This affects an unknown function of the file internal/runner/static_scanner.go of the component Static Scanner. This manipulation causes incomplete comparison with missing factors. It is possible to launch the attack on the local host. The exploit has been published and may be used. Upgrading to version 0.1.7 mitigates this issue. Patch name: 9f6a6fbb9f1137345566d0ab44c73893dfe112fa. The affected component should be upgraded. | ||||
| CVE-2026-90940 | 2 201206030, Xxyopen | 2 Novel-plus, Novel-plus | 2026-09-20 | 5.3 Medium |
| novel-plus through 5.3.3 contains an insecure default cache-management password in the CacheController.refreshCache endpoint that allows anonymous attackers to invalidate portal caches by supplying the hardcoded default value in the URL path. Attackers can trigger unauthorized cache invalidation by accessing the cache/refresh endpoint with the known default password, forcing unnecessary database queries to repopulate the cache. | ||||
| CVE-2026-90780 | 1 Sipp | 1 Sipp | 2026-09-20 | 7.5 High |
| SIPp through 3.7.7 contains a buffer overflow vulnerability in the get_header() function in src/sip_parser.cpp when processing SIP messages with header content exceeding 20,490 bytes. Unauthenticated remote attackers can send crafted SIP messages with oversized headers to overflow the static buffer and crash the process. | ||||
| CVE-2026-87824 | 1 Luben | 1 Zstd-jni | 2026-09-20 | 7.5 High |
| zstd-jni before 1.5.7-14 fails to validate the samples buffer capacity in Zstd.trainFromBufferDirect, allowing attackers to read past buffer boundaries by supplying oversized per-sample lengths. Attackers can trigger out-of-bounds memory access by providing crafted sample length arrays that cause the native implementation to walk past the buffer allocation, resulting in JVM termination. | ||||
| CVE-2026-39919 | 2026-09-20 | 9.8 Critical | ||
| Ghostscript before 10.08.0 contains a heap-based buffer overflow vulnerability in the JPEG 2000 output adapter (base/sjpx_openjpeg.c) that allows attackers to cause memory corruption by supplying a crafted PDF containing a JPEG 2000 image with mismatched component subsampling factors. When image components declare different subsampling values, the non-samescale sub-byte-depth output path allocates a row buffer sized for packed output but writes a full byte per output column regardless of bit depth, overflowing the allocation and corrupting internal chunk-allocator metadata to achieve code execution. | ||||
| CVE-2026-13272 | 1 Ibm | 4 Security Verify Access, Security Verify Access Container, Verify Identity Access and 1 more | 2026-09-20 | 5.4 Medium |
| IBM Verify Identity Access is missing origin validation which could allow a remote attacker to perform operations as the victim and potentially launch further attacks against the systems. | ||||
| CVE-2026-11918 | 1 Ibm | 2 Contextforge-mcp-gateway, Contextforge Mcp Gateway | 2026-09-20 | 5.4 Medium |
| IBM ContextForge MCP Gateway <= v1.0.4 IBM mcp-context-forge could allow an authenticated user to bypass protection mechanisms due to incomplete recursive inspection of nested payload content. | ||||
| CVE-2026-90257 | 1 Linux | 1 Linux Kernel | 2026-09-20 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: virtio_bt: avoid OOB read of build info string The virtbt_setup_zephyr() sends the Zephyr vendor command 0xfc08 (Read Build Information) and hands the response to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at skb->data + 1, without checking the length. A backend that answers with status only leaves that pointer past the end of the received data, so the walk reads adjacent slab memory until it meets a NUL. Those bytes reach the kernel log and the firmware-info debugfs file. To fix this, print the string with a bounded "%.*s" limited to skb->len - 1. A short or unterminated response then prints as much as arrived instead of failing setup. This mirrors commit dd068ef04412 ("Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()"), which fixed the identical pattern. | ||||
| CVE-2026-93190 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_typec: Reject out-of-bounds PD cap count cros_typec_register_partner_pdos() copies the partner PDOs from the EC TYPEC_STATUS response into the fixed caps_desc.pdo[PDO_MAX_OBJECTS] array. memcpy(caps_desc.pdo, resp->source_cap_pdos, sizeof(u32) * resp->source_cap_count); ... memcpy(caps_desc.pdo, resp->sink_cap_pdos, sizeof(u32) * resp->sink_cap_count); PDO_MAX_OBJECTS is 7. source_cap_count and sink_cap_count are u8 fields from the EC. The only check is that they are not both zero. If either is larger than 7, the memcpy writes past the end of the array on the stack. A count of 255 overflows it by about 1 KB. The EC source arrays are only seven entries wide. A larger count reads past them too. The ChromeOS EC firmware caps these counts today, so a compliant setup does not hit this. The kernel should still validate these values rather than trust them. Validate the counts in cros_typec_register_partner_pdos() next to the memcpy. Skip the PDO registration if either count is above PDO_MAX_OBJECTS. The rest of cros_typec_handle_status() still runs so events are handled and cleared. | ||||
| CVE-2026-92485 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix WARNING in bpf_tracing_link_release The trampoline could be corrupted by the blindly 'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier. 1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became 'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the trampoline would poke the target prog's nop insn using jmp insn instead of call insn. 2. Another fexit loaded with the same tail_call_reachable prog target. 'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'. 3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in 'tr->flags', the trampoline will fail to restore the prog's nop insn using call insn. [ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98 ... [ 3.428793] bpf_link_free+0x58/0x130 [ 3.429293] bpf_link_release+0x23/0x30 Fix the warning by updating 'tr->flags' with '|=' and lock. | ||||
| CVE-2026-90407 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix overreads in ath11k_wmi_process_csa_switch_count_event() There is no policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT, so the parse infrastructure does not enforce a minimum length for the event struct. Additionally, the num_vdevs field is taken directly from firmware and used as a loop bound over the vdev_ids array without checking that it fits within the TLV payload. Either condition can cause an out-of-bounds read. Add a TLV policy entry for WMI_TAG_PDEV_CSA_SWITCH_COUNT_STATUS_EVENT so the parse infrastructure enforces a minimum length for the fixed-size event struct. Add a helper ath11k_wmi_tlv_data_len() to recover the payload length of a parsed TLV from the header preceding its data pointer. Use it in ath11k_wmi_process_csa_switch_count_event() to bound num_vdevs before the loop. Compile tested only. | ||||
| CVE-2026-93095 | 1 Linux | 1 Linux Kernel | 2026-09-20 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hfsplus: validate thread record before delete key rebuild hfsplus_delete_cat() is called with str == NULL when the last open reference to an unlinked HFS+ hardlink backing inode is closed. In that case, the function finds the catalog thread by CNID and rebuilds the catalog key from thread.nodeName. That reconstruction path reads thread.nodeName.length directly from the catalog B-tree into fd.search_key and then copies length * 2 bytes into fd.search_key->cat.name.unicode. It does not first check that the found record is a thread record or that its size matches the thread name. A corrupted image can therefore provide an oversized thread name length and make hfs_bnode_read() write past the catalog search-key allocation. Read the CNID record through hfsplus_brec_read_cat(), which bounds the record read to sizeof(hfsplus_cat_entry) and verifies that a thread record's size exactly matches nodeName.length. Together, these checks ensure an accepted thread name fits HFSPLUS_MAX_STRLEN. Reject non-thread records before building the delete key from the validated thread name. Share the thread-record-type helper between hfsplus_find_cat() and hfsplus_delete_cat(). | ||||
| CVE-2026-76899 | 1 1panel-dev | 1 Cordyscrm | 2026-09-20 | 5.7 Medium |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. | ||||