Export limit exceeded: 100271 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (100271 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89755 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/migrate_device: clear stale mapping after freeing swapcache __migrate_device_pages() reads the folio mapping before calling folio_free_swap(). When folio_free_swap() succeeds, the folio is removed from the swap cache, but the saved mapping still points to swap_space. Passing the stale mapping to folio_migrate_mapping() makes it use the mapped-folio path for a folio that is no longer in swapcache. It can then operate on swap_space.i_pages with invalid reference accounting, eventually triggering a folio reference count BUG. After a successful split, nr still contains the number of pages in the original large folio, although each resulting page is now a separate order-0 folio. Reset nr to 1 so each split folio is processed separately, including its own swapcache removal and mapping lookup. Refresh the saved mapping after folio_free_swap() so the current folio state is used during migration. | ||||
| CVE-2026-89731 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/ras: Fix cxl_rch_get_aer_info() out-of-bounds AER register read cxl_rch_get_aer_info() copies the RCH Downstream Port AER capability from the RCRB MMIO block using a readl() loop bounded by sizeof(struct aer_capability_regs). This struct is a software layout and its embedded struct pcie_tlp_log is larger than the on-wire AER capability. As a result the loop reads past the mapped AER register block. The over-read also populates the software-only tail fields including header_log.header_len. An out-of-range header_len passed to pcie_print_tlp_log() can then loop past the header log buffer and cause a second out-of-bounds read. The read was correct when introduced, but struct pcie_tlp_log has since grown (Header Log and TLP Prefix Log sizes, header_len and flit fields), so sizeof(struct aer_capability_regs) no longer matches the physical AER capability. Bound the read to the physical AER registers, header through the 16 byte Header Log. Zero the destination first so the software-only fields are deterministic. | ||||
| CVE-2026-89693 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create() nfsd4_create() stores the return value of nfsd4_acl_to_attr() in status, but the switch(create->cr_type) block unconditionally overwrites it in every branch. ACL translation errors are silently discarded, and the CREATE proceeds without the requested ACL. Add an early exit check after nfsd4_acl_to_attr(), matching the pattern already used in nfsd4_setattr(). [ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] | ||||
| CVE-2026-89685 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix clock domain mismatch in clients_still_reclaiming() clients_still_reclaiming() computes a deadline from nn->boot_time (CLOCK_REALTIME, ~1.7 billion) but compares it against ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot). The comparison is always false — it would take ~54 years of uptime for BOOTTIME to exceed the REALTIME-derived deadline. This means any client can hold the server in grace indefinitely by sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim operations for all other clients. Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time and use it for the deadline computation. boot_time (CLOCK_REALTIME) is preserved for its cl_boot clientid-nonce role. | ||||
| CVE-2026-89667 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: close shrinker/GC/fsnotify vs per-net shutdown race in filecache The shrinker, GC worker, and fsnotify/lease callbacks can unhash an nfsd_file from the rhashtable and then call nfsd_file_dispose_list_delayed() to move it to the per-net dispose list. If nfsd_file_cache_shutdown_net() runs concurrently, its rhashtable walk misses the already-unhashed file, and its drain of the per-net dispose list can run before the file has been queued. The file then sits on the per-net list with no thread to drain it, leaking both the file and its associated state. The GC worker and shrinker already hold nfsd_gc_lock while walking the LRU, but in the original code they release it before calling nfsd_file_dispose_list_delayed(). The fsnotify/lease path (nfsd_file_close_inode) has no synchronization at all. Fix this by: 1. Widening nfsd_gc_lock in both nfsd_file_gc() and nfsd_file_lru_scan() to cover the nfsd_file_dispose_list_delayed() call. 2. Wrapping nfsd_file_close_inode() in nfsd_gc_lock so that all three callers of nfsd_file_dispose_list_delayed() hold the lock. 3. Adding a spin_lock/unlock(nfsd_gc_lock) barrier in nfsd_file_cache_shutdown_net() after the purge, so that any in-progress disposal has fully completed before the per-net list is drained. All operations inside the lock are non-sleeping (rhashtable lookups, atomic bit/refcount ops, list moves, svc_wake_up), so the spinlock is appropriate. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89622 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: mcp2221: clear rxbuf after I2C/SMBus transfer completes mcp_i2c_smbus_read() stores the caller-supplied buffer pointer in mcp->rxbuf for the duration of a transfer but never clears it when the transfer finishes or times out. Once the caller frees or reuses the buffer, mcp->rxbuf becomes a dangling pointer. A delayed or spurious MCP2221_I2C_GET_DATA report can then drive mcp2221_raw_event() to memcpy device data into the freed memory, causing a write use-after-free. Route all return paths through a single exit point that clears mcp->rxbuf and mcp->rxbuf_size, so that the existing !mcp->rxbuf guard in the raw_event handler can reject any report arriving after the transfer has ended. | ||||
| CVE-2026-89602 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: skip sufficiently large global buffers when resizing z_erofs_gbuf_nrpages is advanced only after every global buffer has been grown. If a resize fails after some buffers were enlarged, a retry revisits those enlarged buffers. Retrying the same size then returns -ENOMEM because alloc_pages_bulk() has no pages to add and the unchanged return value is treated as a failure. Retrying an intermediate size allocates a temporary pointer array smaller than gbuf->nrpages and copies more existing pointers than the array can hold. Skip buffers that already satisfy the request. Once all remaining buffers have caught up, advancing z_erofs_gbuf_nrpages again describes the guaranteed minimum size across the pool. | ||||
| CVE-2026-89564 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip: orphan prefetched skbs before multicast forwarding IPv4 and IPv6 input preserve an skb->sk association installed by bpf_sk_assign() so that local delivery can use the selected socket under RCU. Both address families can also prefetch a socket in UDP early demux. In both paths (BPF and UDP early demux) a reference is not guaranteed to be held on the socket. When a multicast packet is not locally deliverable, IPv6 hands the original skb to ip6_mr_input(). IPv4's ip_mr_input() similarly keeps the original skb when local delivery is not needed. Either path can put the skb on an unresolved multicast route queue or forward it after the receive-side RCU section ends. After the prefetched socket is destroyed, a later skb free invokes sock_pfree() and dereferences the stale skb->sk. Orphan the skb before each non-local multicast forwarding path. Local delivery retains the original skb; the existing skb_clone() calls provide multicast forwarding with a socket-free clone. | ||||
| CVE-2026-89561 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: rpl: fix NULL dereference of idev in ipv6_rpl_srh_rcv() ipv6_rpl_srh_rcv() dereferences idev from __in6_dev_get() without a NULL check when reading idev->cnf.rpl_seg_enabled. When the device's MTU drops below IPV6_MIN_MTU, addrconf_ifdown() clears dev->ip6_ptr through RCU_INIT_POINTER(). A packet that passed the idev check in ip6_rcv_core() can then reach ipv6_rpl_srh_rcv() with dev->ip6_ptr already NULL. Reproduced by flooding the receiving interface with ping6 traffic while flapping its MTU between 1500 and 1200: BUG: KASAN: null-ptr-deref in ipv6_rpl_srh_rcv+0xb3/0x1070 Read of size 4 at addr 00000000000006b4 by task ping6/394 CPU: 2 UID: 0 PID: 394 Comm: ping6 Not tainted 7.2.0-rc7-micro-vm-dev-00095-g24ef02f934ee #240 PREEMPT(full) Call Trace: <IRQ> kasan_report+0xc6/0x100 ipv6_rpl_srh_rcv+0xb3/0x1070 ip6_protocol_deliver_rcu+0x759/0x9a0 ip6_input_finish+0xa8/0x1b0 ip6_input+0xe1/0x490 ipv6_rcv+0x33d/0x460 __netif_receive_skb_one_core+0xd6/0x130 process_backlog+0x2cc/0xa00 __napi_poll.constprop.0+0x56/0x270 net_rx_action+0x327/0x730 handle_softirqs+0x11e/0x630 do_softirq+0xb3/0xf0 </IRQ> Both ipv6_rpl_srh_rcv() and ipv6_srh_rcv() are called only from ipv6_rthdr_rcv(), which already has an idev lookup. Fix the NULL dereference on the RPL path by checking idev in ipv6_rthdr_rcv(), before it calls either function. The callees take idev as an argument and no longer call __in6_dev_get(), so the packet is now dropped in one place, with SKB_DROP_REASON_IPV6DISABLED on both paths. | ||||
| CVE-2026-89545 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: defer rq_argp and rq_resp free until after RCU grace period svc_rqst_free() frees rqstp->rq_argp and rqstp->rq_resp synchronously via kfree(), but defers the rqstp struct free via kfree_rcu(). After svc_exit_thread() calls list_del_rcu() and svc_rqst_free(), there is a window where RCU readers that started before list_del_rcu() can still traverse the thread list and find the rqstp. These readers (e.g. nfsd_nl_rpc_status_get_dumpit()) dereference rqstp->rq_argp, which has already been freed — a use-after-free. Fix this by moving the kfree of rq_argp and rq_resp into an explicit call_rcu() callback alongside the struct free. Resources not accessed by RCU readers (bvec, buffer pages, scratch folio, auth_data) remain synchronously freed. | ||||
| CVE-2026-89544 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: fix gssx_dec_option_array error path bugs Four coupled defects in the gssx XDR option-array decoder make the error paths unsafe: a NULL deref in the caller, a refcount leak on the decoded group_info, and a latent use-after-free that the leak fix would otherwise expose. gssx_dec_option_array() sets oa->count = 1 before allocating oa->data. If that allocation fails, -ENOMEM is returned with oa->count == 1 and oa->data == NULL. All other error paths jump to free_oa: which frees oa->data and NULLs it but also leaves oa->count == 1. The caller trusts the count: gssp_accept_sec_context_upcall() gssx_dec_accept_sec_context() gssx_dec_option_array() /* fails, count=1 data=NULL */ data = res.options.data[0].value /* NULL deref */ Independently, free_creds: releases the partially decoded svc_cred with a bare kfree(creds). gssx_dec_linux_creds() installs a groups_alloc() result into creds->cr_group_info; that object is kvmalloc-backed and refcounted, and only put_group_info() reaches kvfree(). A plain kfree(creds) drops the wrapper and leaks the group_info allocation. The natural fix for the leak is to call free_svc_cred(creds) before kfree(creds), but free_svc_cred() invokes put_group_info() on creds->cr_group_info unconditionally when non-NULL. The existing out_free_groups: path in gssx_dec_linux_creds() already called groups_free() on that pointer without clearing it, so once free_svc_cred() is wired in, the subsequent put_group_info() would touch freed memory. Fix all four together: - Move the oa->count = 1 assignment below the oa->data allocation so it is never set when oa->data is NULL. - Reset oa->count to 0 at free_oa: so count and data stay coherent and the caller sees an empty option array. - Call free_svc_cred(creds) before kfree(creds) at free_creds: so the refcounted cr_group_info is released. free_svc_cred() either NULL-guards each field explicitly (cr_group_info has an if() check) or delegates to a helper that is NULL-safe itself (kfree for the string fields, gss_mech_put() which guards with if(gm) at gss_mech_switch.c:342), so it is safe to call on a partially decoded svc_cred where only cr_uid/cr_gid/cr_group_info have been written and everything else is zero from kzalloc. - In gssx_dec_linux_creds()'s out_free_groups: path, release cr_group_info with put_group_info() rather than groups_free() so the teardown matches free_svc_cred()'s refcount-aware path, and clear the pointer so a later free_svc_cred() on the same creds does not release it a second time. | ||||
| CVE-2026-89535 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Reorder rpcrdma_rn_unregister before rdma_destroy_id svc_rdma_free() caches rdma->sc_cm_id->device before teardown, then calls rdma_destroy_id(sc_cm_id) which frees the cm_id. rpcrdma_rn_unregister() follows, but between those two calls the transport's sc_rn entry is still installed in the device's rd_xa. A concurrent ib_unregister_device walk can dispatch svc_rdma_xprt_done() against the now-freed sc_cm_id. Move rpcrdma_rn_unregister() before rdma_destroy_id() so the transport's notification entry is removed from the xarray before the cm_id it references is destroyed. Also guard the sc_cm_id dereference with a NULL check: the following patches introduce paths that reach svc_rdma_free() with sc_cm_id == NULL (listener create failure, ADDR_CHANGE replacement failure). | ||||
| CVE-2026-80521 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Unlink scc_entry in unix_del_edge(). Kyle Zeng reported that GC could free a dead SCC partially. The scenario is as follows: 1) Create two SCCs: X -. A <-> B ^--' 2) Run the following concurrently: 2-1) send() sk-B to sk-B from sk-X 2-2) close() both A and B At 2-1), there is a small window where unix_add_edges() publishes a new edge (B <-> B) to GC but its skb is not queued by skb_queue_tail(). If 2-2) completes before skb_queue_tail() and GC is triggered, it judges A <-> B as dead, but B is not freed because GC cannot collect the not-yet-queued skb holding the B <-> B edge. X -. A <-> B -. This edge is visible ^--' ^..' but skb is not This itself is not a problem since the next GC run will judge B as dead as well and free it finally. X -. A <.> B -. ^--' ^--' However, X's SCC forces the next GC to call unix_walk_scc_fast(), and it iterates over A through B's scc_entry. Let's unlink scc_entry before freeing the vertex in unix_del_edge(). | ||||
| CVE-2026-74496 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fou: Fix use-after-free in fou_create() fou_create() publishes struct fou through sk_user_data before adding the new FOU port to the per-netns list. If fou_add_to_port_list() fails, the error path frees fou while it is still reachable through sk_user_data. A concurrent receive can then dereference the freed object in fou_from_sock(). This ordering issue was previously noted in the linked discussion. The failure is reachable when local port 0 is requested. Each socket binds to a different ephemeral port, but fou_cfg_cmp() compares the requested port 0 and reports -EALREADY once an entry already exists. Release the tunnel socket before freeing fou so sk_user_data is cleared first, and defer reclamation with kfree_rcu() to protect concurrent RCU readers. This matches the lifetime handling in fou_release(). | ||||
| CVE-2026-74407 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: cancel SSR work items during PCI shutdown A reboot can crash the kernel if it overlaps with WLAN firmware crash recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown path while freeing DMA-backed MHI contexts. Simplified trace: dma_free_attrs mhi_deinit_dev_ctxt [mhi] ath11k_pci_power_down [ath11k_pci] ath11k_pci_shutdown [ath11k_pci] device_shutdown kernel_restart On the host side, SSR is driven by the MHI RDDM callback, which queues reset_work to perform device recovery. reset_work power-cycles the device by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The power-down phase deinitializes MHI and frees DMA resources. Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR recovery flow. As a result, the shutdown path (ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR recovery sequence. Fix this by canceling SSR-related work items during PCI shutdown, marking the device as unregistering, and serializing the RDDM callback path that checks and queues reset_work. This ensures that no new SSR recovery work can be queued once teardown has started, and that any in-flight recovery work is fully synchronized before device power-down, preventing MHI teardown and DMA resource freeing from running more than once. Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k devices do not queue reset_work in normal SSR flows. Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 | ||||
| CVE-2026-74347 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not to handle two refcounts on a single object. Remove nf_queue_nf_hook_drop(): a packet sitting in nfqueue will just hold a reference to the nf_ct_timeout object until packet is reinjected, since this is part of the ct extension, this will be released by the time the conntrack is freed. nf_ct_untimeout() is still called to clean up in a best effort basis: the ct timeout on existing entries gets removed when the ct timeout goes away, but as long as the iptables ruleset still refers to the ct timeout through a template, new conntracks may keep attaching it and extend its lifetime until the rule is removed. nf_ct_untimeout() is not called anymore from module removal path, this is unlikely to find timeouts give module refcount is bumped, and the new refcount already tracks the ct timeout policy use so it is released when unused. | ||||
| CVE-2026-74294 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls. | ||||
| CVE-2026-74289 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-74258 | 1 Linux | 1 Linux Kernel | 2026-09-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Guard __get_user acesss with access_ok for uprobe_multi data As reported by sashiko [1] we need to use access_ok to check the user space data bounds before we use __get-user to get it. [1] https://lore.kernel.org/bpf/20260610145235.CB1441F00893@smtp.kernel.org/ | ||||