Export limit exceeded: 398480 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 398480 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398480 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93227 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/mm_init: deferred_grow_zone(): fix out-of-range first_deferred_pfn With CONFIG_DEFERRED_STRUCT_PAGE_INIT enabled, deferred_grow_zone() initializes struct pages early in boot to satisfy an allocation. With a large CMA reservation in place, the ranges deferred_init_memmap() finds may not add up to the allocation it was asked for, and the function ends up initializing the memory map of the entire zone and still falls short. That is fine in itself: the function accounts for it and leaves the caller to decide whether it now has enough memory. However, the update of pgdat->first_deferred_pfn that tracks where uninitialized memory map starts could overflow. If the node's RAM end is not aligned on PAGES_PER_SECTION boundaries and some deferred struct pages were initialized, pgdat->first_deferred_pfn would point past the end of the node's memory. deferred_init_memmap() later picks up from pgdat->first_deferred_pfn and hits a BUG_ON(), because it expects a pfn within its node. For example, when running a kernel with CONFIG_DEFERRED_STRUCT_PAGE_INIT=y and CONFIG_CMA=y using the following qemu command line qemu-system-x86_64 -enable-kvm -m 8032M -kernel bzImage \ -append "nokaslr cma=4768M@0x100000000" the kernel panics: kernel BUG at mm/mm_init.c:2131! CPU: 3 UID: 0 PID: 36 Comm: pgdatinit0 Not tainted 7.2.0-rc6 #1 RIP: 0010:deferred_init_memmap+0x1b8/0x1c0 RAX: 0000000000236000 R13: 0000000000238000 Call Trace: kthread+0xdf/0x120 ret_from_fork+0x187/0x250 Make sure that the update of pgdta->first_deferred_pfn does not overflow when the entire zone's (and therefore node's) memory map is initialized. [rppt: massaged the changelog] | ||||
| CVE-2026-93229 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: add missing read barrier to rpc_status_get dumpit seqcount retry The hand-rolled seqcount-like protocol in nfsd_nl_rpc_status_get_dumpit() is missing a read memory barrier (smp_rmb) before its second counter check. The standard kernel read_seqcount_retry() includes smp_rmb() to ensure that all data reads complete before the counter is re-checked. Without this barrier, on weakly-ordered architectures (ARM, POWER), the CPU may reorder field reads past the second counter check, making the retry logic ineffective: it could observe a consistent counter pair while reading fields that have been concurrently modified by the writer. Add smp_rmb() before the second counter check to order the field reads ahead of it, matching the barrier semantics of the standard seqcount read-side. The begin-side smp_load_acquire() already pairs with the smp_store_release() in nfsd_dispatch(); with the smp_rmb() now ordering the field reads, the retry check no longer needs acquire semantics and reads the counter with a plain READ_ONCE(), as read_seqcount_retry() does. [ cel: Use READ_ONCE instead of smp_load_acquire() ] | ||||
| CVE-2026-86857 | 1 Servicenow | 1 Servicenow Ai Platform | 2026-09-26 | N/A |
| ServiceNow has remediated an authorization bypass security issue that was identified in the ServiceNow AI Platform. This security issue, if exploited, could enable an authenticated user to access data within the ServiceNow AI Platform that the user otherwise would not be entitled to access, potentially enabling further unintended access. ServiceNow deployed an update to hosted instances, and ServiceNow provided the update to our partners and self-hosted customers. We are not currently aware of malicious exploitation against ServiceNow instances. We recommend customers promptly apply appropriate updates or upgrade to a patched release if they have not already done so. | ||||
| CVE-2026-52622 | 2026-09-26 | 7.5 High | ||
| An issue in Wellav Technologies Co., Ltd Wellav WES Emergency Broadcast Terminal WES100, WES270, WES280, and WES290 before 08-08-2023 allows a remote attacker to obtain sensitive information via the global API request wrapper function | ||||
| CVE-2026-88421 | 2026-09-26 | 7.5 High | ||
| Incorrect access control in the BlogPage.get_entries() component of APSL puput v1.2.1 through v2.2.0 allows unauthenticated attackers to view restricted blog entries via the blog index, the tag, category, author and date archives, the sidebar widgets, or the RSS feed. | ||||
| CVE-2026-97730 | 1 Netgate | 2 Pfsense Ce, Pfsense Plus | 2026-09-26 | 8.5 High |
| In Netgate pfSense Plus before 26.07 and pfSense CE before 2.9.0, a Local File Inclusion (LFI) vulnerability in the Dashboard (index.php) widget sequence data handling allows an authenticated attacker to execute arbitrary PHP code. To exploit this, an attacker with privileges to modify Dashboard settings and write arbitrary files to the pfSense firewall system (e.g., /tmp/test.widget.php) can submit a crafted widget sequence value containing a path traversal payload (e.g., ../../../../../../../../../../../tmp/test). The Dashboard will subsequently read and execute the arbitrary PHP file as if it were a standard widget. | ||||
| CVE-2026-86837 | 2 Bookly, Wordpress | 2 Bookly, Wordpress | 2026-09-26 | 5.3 Medium |
| The Bookly WordPress plugin before 28.3 does not properly verify a customer's identity before updating their stored details, allowing unauthenticated attackers who know a customer's primary identifier to overwrite that customer's stored personal information such as name, email and address. | ||||
| CVE-2026-80514 | 1 Wordpress-extensions | 1 Wpforo Forum | 2026-09-26 | 5.3 Medium |
| The wpForo Forum WordPress plugin from 3.0.0 before 3.1.6 does not verify the source of client-supplied IP address headers before using them to key its per-visitor rate limit on paid AI requests, allowing unauthenticated attackers to bypass the limit by spoofing the header and exhaust the site owner's metered AI credits. | ||||
| CVE-2026-88848 | 1 Wordpress-extensions | 1 Masterstudy Lms | 2026-09-26 | 4.2 Medium |
| The MasterStudy LMS WordPress plugin from 1.9 before 3.7.50 does not verify that a course a member asks to enrol in is covered by their membership plan, nor that the plan identifier submitted with the request is one they actually hold, allowing any member to enrol themselves into restricted paid courses outside their plan and beyond the number of courses it entitles them to. | ||||
| CVE-2026-97530 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Fix soft lockup polling continuation IOCB signature qla27xx_copy_multiple_pkt() and qla27xx_copy_fpin_pkt() poll rsp_q->ring_ptr->signature for RESPONSE_PROCESSED (0xDEADDEAD) to decide whether the next continuation IOCB has arrived, spinning on cpu_relax() without advancing the ring or decrementing the entry count while it has not. response_t::signature lives at byte offset 60, but a continuation IOCB (sts_cont_entry_t / struct sts_cont_entry_ext) carries raw FC frame payload at that offset (data[56..59]). A received frame whose payload bytes happen to equal 0xDEADDEAD is therefore misread as "not yet arrived", and the loop spins forever in interrupt/DPC context, causing a CPU soft lockup. The poll is also unnecessary: callers of qla27xx_copy_multiple_pkt() (PT_LS4_UNSOL and the NVMe purls path) already gate on qla_chk_cont_iocb_avail(), which guarantees all entry_count IOCBs are present before copying begins. The sibling helper __qla_copy_purex_to_buffer() already drops the signature poll and relies on the entry_type == STATUS_CONT_TYPE guard instead. Remove the signature busy-wait from both helpers, keeping the entry_type guard, and gate the FPIN path with qla_chk_cont_iocb_avail() so it defers and re-processes on the next interrupt once all continuation IOCBs have arrived, mirroring the ELS_AUTH_ELS and PT_LS4_UNSOL arms. With this the signature field is never read on a continuation IOCB, eliminating the payload-aliasing lockup. | ||||
| CVE-2026-100524 | 1 Cotonti | 1 Cotonti Siena | 2026-09-26 | 5.4 Medium |
| Cotonti through 1.0.0 contains a cross-site request forgery vulnerability in the extensions manager that allows attackers to perform state-changing actions without anti-CSRF token validation. Attackers can craft links or embed images to force administrators to install, update, pause, or unpause extensions by tricking them into visiting a malicious page while authenticated. | ||||
| CVE-2026-100520 | 2026-09-26 | 8.8 High | ||
| Laranode versions before 1.2.1 contain a path traversal vulnerability in the POST /filemanager/upload-file endpoint that allows authenticated users to write arbitrary files outside their home directory. Attackers can supply directory traversal sequences in the path parameter to write PHP files into other tenants' web roots and execute code as those tenants. | ||||
| CVE-2026-97415 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: tree-checker: validate names in ROOT_REF and ROOT_BACKREF ROOT_REF and ROOT_BACKREF items contain a struct btrfs_root_ref followed by the subvolume name. Several readers assume that this layout is already valid and then use the on-disk name length directly. A corrupted item can therefore make those readers address bytes outside the item, and BTRFS_IOC_GET_SUBVOL_INFO can copy too many bytes into its fixed-size UAPI name buffer. Validate ROOT_REF and ROOT_BACKREF items in tree-checker before any reader uses them. Reject records that do not contain a non-empty name, whose name_len does not exactly describe the remaining item payload, or whose name exceeds BTRFS_NAME_LEN. For BTRFS_IOC_GET_SUBVOL_INFO, copy only the validated on-disk name_len instead of deriving the copy length from the item size. The ioctl result is zeroed when allocated. That leaves the existing trailing zero byte untouched. | ||||
| CVE-2026-97437 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in ntfs_dir_emit() and hdr_find_e() The bounds check in ntfs_dir_emit() compares fname->name_len (a character count) against e->size (a byte count) without accounting for the 2-byte-per-character UTF-16LE encoding or the ATTR_FILE_NAME header size: if (fname->name_len + sizeof(struct NTFS_DE) > le16_to_cpu(e->size)) This computes: name_len + 16 > e_size The correct check must account for the ATTR_FILE_NAME header (66 bytes before the name) and the UTF-16LE character size (2 bytes each): sizeof(NTFS_DE) + offsetof(ATTR_FILE_NAME, name) + name_len * sizeof(short) > e_size Which computes: 16 + 66 + name_len * 2 > e_size The correct calculation already exists as fname_full_size() in ntfs.h and is used in cmp_fnames(), namei.c, and fslog.c, but was not used in the readdir path. A crafted NTFS image with an index entry containing a small e->size but large fname->name_len bypasses the current check, causing ntfs_utf16_to_nls() to read past the entry boundary. Additionally, add a key_size validation in hdr_find_e() to ensure the declared key_size does not exceed the available entry data, preventing comparison functions from reading past entry boundaries on the lookup path. | ||||
| CVE-2026-97570 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | ||||
| CVE-2026-97941 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: take n->list_lock in __slab_try_return_freelist() to avoid race Commit ba7425312607 ("mm, slab: add an optimistic __slab_try_return_freelist()") incorrectly assumed that nobody has freed an object to the slab as long as slab->freelist is NULL and cmpxchg succeeds. However, as reported by Hyunwoo Kim [1], other CPUs might have freed an object to the slab, insert the slab to the partial list, then allocated an object from the slab, and be in the middle of removing the slab from the list under n->list_lock. Since __refill_objects_node() puts the slab back on pc.slabs outside n->list_lock, it might insert the slab into that list while the slab is concurrently being removed from n->partial. This led to a list corruption [1]: list_add corruption. next->prev should be prev (ffff888100000248), but was dead000000000122. (next=ffffea000416e410). kernel BUG at lib/list_debug.c:29! Oops: invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 UID: 65534 PID: 144 Comm: poc Not tainted 7.2.0-16172-gcf72cbb39da8-dirty #1 PREEMPT(lazy) RIP: 0010:__list_add_valid_or_report+0x80/0xd0 ... Call Trace: alloc_from_new_slab+0x183/0x300 ___slab_alloc+0x31c/0x890 __kmalloc_noprof+0x3d4/0x800 lsm_blob_alloc+0x2d/0x50 security_msg_msg_alloc+0x26/0x90 load_msg+0x1aa/0x210 do_msgsnd+0x91/0x800 do_syscall_64+0x109/0x5d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... Kernel panic - not syncing: Fatal exception This is a classic ABA problem where cmpxchg succeeds but the state has changed since __refill_objects_node() took the freelist from the slab. As Vlastimil Babka mentioned [2], it should be rare to return more than one slab (due to the racy read of slab->counters in get_partial_node_bulk()). Therefore, instead of introducing additional complexity, acquire and release n->list_lock twice in the worst case. Return the slab directly to the partial list and hold n->list_lock across the cmpxchg and add_partial(). This is similar to the initial version of commit ba7425312607 [3]. This is enough to avoid the race as the list manipulation is serialized by n->list_lock. While at it, bring back unlikely() hint now that the condition is unlikely. | ||||
| CVE-2026-100505 | 1 Nsa | 1 Ghidra | 2026-09-26 | 4.4 Medium |
| Ghidra versions 11.2 through 12.1.4 contain a heap out-of-bounds read vulnerability in StringManager::getCodepoint when decoding multi-byte UTF-8, UTF-16, or UTF-32 characters without validating remaining buffer length. Attackers can craft malicious binaries with constant byte stores ending in multi-byte lead units to trigger out-of-bounds reads that crash the decompiler or leak adjacent heap memory into decompiled output. | ||||
| CVE-2026-78397 | 1 Wordpress-extensions | 1 Link Library | 2026-09-26 | 4.0 Medium |
| The Link Library WordPress plugin before 7.9.6 does not validate the destination of a user-supplied URL before falling back to an unprotected fetch when its safe request is rejected, allowing unauthenticated visitors to make the site issue requests to hosts on its internal network and to learn from the response whether an internal service answered. Versions below 7.8.8 are covered by CVE-2025-68600; this entry covers 7.8.8 through 7.9.5, where that fix was incomplete. Exploitation requires the site owner to have published the Link Library WordPress plugin before 7.9.6's public link submission form with reciprocal-link validation enabled. | ||||
| CVE-2026-97524 | 1 Linux | 1 Linux Kernel | 2026-09-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: avoid unneeded actions on subflow reset Once in a blue moon, the mptcp receive path can recursively call mptcp_data_ready() via state change under unlucky error conditions, and then try to hold the data lock again. Break the recursion loop explicitly checking for the exceptional condition. Add a new flag instead of using an existing one like 'closing', to exit early in subflow_state_change(), and explicitly flush the RX queue at reset time. This avoids unneeded processing to check for available data -- calling get_mapping_status() and more on a dying subflow -- but also in error reporting and worker scheduling. Note that we must consume the currently peeked skb before invoking mptcp_dss_corruption to avoid consuming it again after the eventual reset has freed it. | ||||
| CVE-2026-97526 | 1 Linux | 1 Linux Kernel | 2026-09-26 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/pai: Support CPU hotplug for PMU PAI The command 'perf stat -e pai_crypto/CRYPTO_ALL/ -- <command>' crashes the kernel when CPUs are hotplug added during that run. Root cause is the missing allocation of per-CPU data structures for that new CPU. The allocation is dynamic and the first event that has task context creates such a structure for each online CPU. This is not sufficient. CPUs may be offline during event creation and can be set online during the perf run time. For example commands # echo 0 > /sys/devices/system/cpu/cpu1/online # perf stat -e cycles -i -- stress-ng -t10s --matrix X # sleep 1 # echo 1 > /sys/devices/system/cpu/cpu1/online Currently without a CPU hotplug handler, that new CPU has no per-CPU data infrastructure. The scheduler runs PMU call back function pai_add() to install the PMU support for that CPU before the task is being scheduled on that new CPU. In pai_add() instructions mp = this_cpu_ptr(pai_root[idx].mapptr); cpump = mp->mapptr; return a NULL pointer and the result is a kernel panic as variable cpump is used inside that function. Add CPU hotplug support for CPU add and delete and create the necessary per-CPU data infrastructure during CPU hotplug add processing. Same for CPU hotplug remove. This is done when the CPU is offline to ensure the data structures are available when CPU is made online and tasks are scheduled on it. [hca@linux.ibm.com: fixup error path in pai_init()] | ||||