Export limit exceeded: 398038 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398038 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97976 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate packet_len before skb_put_data btintel_pcie_submit_rx_work() reads packet_len from rfh_hdr without checking if it exceeds the RX buffer size. An oversized packet_len can lead to an out-of-bounds read in skb_put_data(). Validate packet_len to ensure it is non-zero and does not exceed BTINTEL_PCIE_BUFFER_SIZE - sizeof(*rfh_hdr), logging an error when invalid. This issue was reported by Claude Mythos. It can be simulated either by using customized firmware configured to return an invalid packet_len or by modifying rfh_hdr->packet_len in the driver before calling btintel_pcie_submit_rx_work(). | ||||
| CVE-2026-97975 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sysfs: Fix NULL pointer dereference in device_del() A NULL pointer dereference in klist_put() occurs when a child device (such as a BNEP network device in bnep_session) is concurrently being unregistered while hci_conn_del_sysfs() reparents child devices. This is caused by a race condition between hci_conn_del_sysfs() and concurrent child device unregistration (e.g. bnep_session calling unregister_netdev()). During device unregistration, device_del() snapshots a non-NULL parent pointer. Concurrently, hci_conn_del_sysfs() finds the child device using device_find_any_child() and calls device_move() to reparent it to NULL, which removes the node from its parent's klist and clears knode_parent. Subsequently, device_del() calls klist_del(&dev->p->knode_parent) using the stale parent snapshot, causing klist_put() to dereference knode_klist(n)->put on an already removed node, resulting in a NULL pointer dereference. This race was introduced by commit 27aabf27fd01 ("Bluetooth: fix use-after-free in device_for_each_child()"), which replaced device_find_child(..., __match_tty) with device_find_any_child() in hci_conn_del_sysfs(). That change was intended to avoid a use-after-free where conn->dev outlived its parent hdev->dev when child devices held references to conn->dev, because conn->dev only held a reference to hdev->dev while registered in sysfs. Fix the issue properly by taking an explicit reference to the parent device with get_device(&hdev->dev) in hci_conn_init_sysfs() and dropping it with put_device(parent) in bt_link_release() when the conn device is freed. This ensures that hdev->dev remains valid for the entire lifecycle of conn->dev, resolving the underlying use-after-free. With the parent reference held properly, restore the __match_tty filter in hci_conn_del_sysfs() so that device_move() is only invoked on persistent RFCOMM TTY devices as originally intended, eliminating the race condition with unregistering network devices. | ||||
| CVE-2026-97974 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: null-check fib6_node before accessing in __ip6_del_rt_siblings() syzbot reported a null-ptr-deref in __ip6_del_rt_siblings() [0]. The stack trace hinted towards a null dereference of rt->fib6_node when fn->leaf is accessed in __ip6_del_rt_siblings(). With RTNL_FLAG_DOIT_UNLOCKED set, inet6_rtm_delroute() operations run concurrently without acquiring the RTNL lock. In ip6_route_del(), the route lookup happens under rcu_read_lock() without acquiring table->tb6_lock. Between ip6_route_del() looking up the route and __ip6_del_rt_siblings() acquiring table->tb6_lock, another thread can modify the routing table. For example, when an ECMP route is replaced via RTM_NEWROUTE with NLM_F_REPLACE, fib6_add_rt2node() unlinks all old siblings and sets iter->fib6_node = NULL. A reproducer was found that triggers this [1]. Add a check to ensure rt->fib6_node is non-null before accessing it. [0] KASAN: null-ptr-deref in range [0x0000000000000020-0x0000000000000027] RIP: 0010:__ip6_del_rt_siblings+0x31e/0x7c0 net/ipv6/route.c:4056 Call Trace: <TASK> ip6_route_del+0x1054/0x1110 net/ipv6/route.c:4232 inet6_rtm_delroute+0x5d7/0x6d0 net/ipv6/route.c:5669 rtnetlink_rcv_msg+0x802/0xc00 net/core/rtnetlink.c:7132 netlink_rcv_skb+0x226/0x4a0 net/netlink/af_netlink.c:2556 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x7f5/0x990 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1900 sock_sendmsg_nosec+0x13a/0x180 net/socket.c:800 __sock_sendmsg net/socket.c:815 [inline] ____sys_sendmsg+0x565/0x870 net/socket.c:2713 ___sys_sendmsg+0x2a5/0x360 net/socket.c:2767 __sys_sendmsg net/socket.c:2799 [inline] __do_sys_sendmsg net/socket.c:2804 [inline] __se_sys_sendmsg net/socket.c:2802 [inline] __x64_sys_sendmsg+0x1b7/0x290 net/socket.c:2802 do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline] do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> [1] https://gist.github.com/NamanGulati/0766a1159b6ca61928faaf87425ff899 | ||||
| CVE-2026-97973 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: destroy the phylink instance on the probe error path macb_mii_init() creates a phylink instance on both of its success paths, but the probe unwind frees the netdev without destroying it, so a failing macb_alloc_tieoff() or register_netdev() leaks the instance. Destroy it at err_out_unregister_mdio, which is only reachable once macb_mii_init() has succeeded, so bp->phylink is valid there. | ||||
| CVE-2026-97972 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: put the "mdio" child node reference on success macb_mii_init() holds the reference returned by of_get_child_by_name() for macb_mdiobus_register() and drops it only on the error paths, so every successful probe leaks a node reference. On a CM5, overlay removal after four bind cycles reports OF: ERROR: memory leak, expected refcount 1 instead of 5 Drop the reference after registration, where __mdiobus_register() has already taken its own for the lifetime of the bus. | ||||
| CVE-2026-97971 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nstree: check listing permission before taking a namespace reference legitimize_ns() takes a reference on the candidate namespace before may_list_ns() has decided whether the caller may see it. The __free(ns_put) cleanup on the denied path can drop the last reference to a mount namespace while we still hold the rcu read lock, and put_mnt_ns() may sleep there. This is the same problem commit 2ec2aff3c8e2 ("ns: make sure reference are dropped outside of rcu lock") fixed for the put_user() path. Neither ns_requested() nor may_list_ns() needs a reference, both only look at the namespace type and at the caller's own namespaces, so do the checks first and take the reference last. Splat: Voluntary context switch within RCU read-side critical section! WARNING: kernel/rcu/tree_plugin.h:332 at rcu_note_context_switch+0x238/0x2a0, CPU#5: a/3442 CPU: 5 UID: 1000 PID: 3442 Comm: a Not tainted 7.0.0-30-generic #30-Ubuntu PREEMPT(lazy) RIP: 0010:rcu_note_context_switch+0x238/0x2a0 Call Trace: <TASK> __schedule+0xcf/0x650 schedule+0x27/0x90 schedule_preempt_disabled+0x15/0x30 __mutex_lock.constprop.0+0x550/0xaf0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3b/0x50 exp_funnel_lock+0xb2/0x260 synchronize_rcu_expedited+0xe7/0x220 namespace_unlock+0x26a/0x320 put_mnt_ns+0xd3/0x120 mntns_put+0xe/0x20 do_listns+0x13e/0x560 __do_sys_listns+0x126/0x2d0 __x64_sys_listns+0x20/0x30 x64_sys_call+0x2366/0x2390 do_syscall_64+0x105/0x5a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> | ||||
| CVE-2026-97970 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-97969 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`. | ||||
| CVE-2026-97968 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | ||||
| CVE-2026-97967 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns. | ||||
| CVE-2026-97966 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: octeontx2-pf: reset HTB scheduler topology before freeing queues HTB offload programs NIX_AF_TLxX_TOPOLOGY on QoS-allocated scheduler queues via otx2_qos_txschq_set_parent_topology(), but teardown freed those queues without clearing TOPOLOGY. The AF only restores PARENT and SCHEDULE on free, so PRIO_ANCHOR/RR_PRIO settings can survive in the shared scheduler pool and affect later allocations. Add otx2_qos_reset_schq_topology() and otx2_qos_free_hw_schq() to zero TL4 through TL2 TOPOLOGY before each schq is returned to the AF during hierarchy teardown and cfg rollback. Skip the aggregation level (TL1): it is a per-tx-link queue shared by the PF, default Tx hierarchy and VFs, and is not freed back to the AF by nix_txschq_free_one(). | ||||
| CVE-2026-97965 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: initialize _md in vxlan_xmit_one() If a VXLAN device is configured with both VXLAN_F_COLLECT_METADATA and VXLAN_F_GBP, and a packet is transmitted through it using an external ip_tunnel_info that lacks the IP_TUNNEL_VXLAN_OPT_BIT flag, md is left pointing to the uninitialized _md stack variable: if (test_bit(IP_TUNNEL_VXLAN_OPT_BIT, info->key.tun_flags)) { if (info->options_len < sizeof(*md)) goto drop; md = ip_tunnel_info_opts(info); } Because IP_TUNNEL_VXLAN_OPT_BIT is not set, md is not updated and remains pointing to _md. Later, vxlan_build_skb() is called with md, which eventually calls vxlan_build_gbp_hdr(): if (vxflags & VXLAN_F_GBP) vxlan_build_gbp_hdr(vxh, md); Inside vxlan_build_gbp_hdr(), md->gbp is read: if (!md->gbp) return; gbp = (struct vxlanhdr_gbp *)vxh; ... if (md->gbp & VXLAN_GBP_DONT_LEARN) gbp->dont_learn = 1; If the stack contains garbage, this causes: 1) VXLAN_HF_GBP flag to be spuriously set in the VXLAN header. 2) gbp->dont_learn and gbp->policy_applied to be set from stack bits. 3) gbp->policy_id to receive 16 bits of uninitialized kernel stack data, leaking it onto the wire. Fix this by zero-initializing _md. If IP_TUNNEL_VXLAN_OPT_BIT is not present, md->gbp remains 0, and vxlan_build_gbp_hdr() returns early without modifying the VXLAN header. | ||||
| CVE-2026-97964 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ppp_synctty: ensure a writeable skb header ppp_sync_txmunge() checks headroom before prepending the address and control bytes, but does not ensure that the skb header is writable. A received skb can reach this function through PPP channel bridging without passing through ppp_start_xmit(), which calls skb_cow_head(). For example, a PPPoE frame may share its buffer with a clone queued to an AF_PACKET socket. If it is bridged to a synchronous tty channel, the address/control bytes can overwrite data still visible to that socket. Use skb_cow_head() to ensure both sufficient headroom and a writable header. | ||||
| CVE-2026-97963 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: stmmac: initialize ptp_lock at probe time priv->ptp_lock is only initialized in stmmac_ptp_register(), which runs during __stmmac_open(). However, the lock is also used while the interface is down and has never been opened: tc_taprio_configure() invokes the PTP gettime64() callback to compute the EST base time when offloading a TAPRIO schedule, and stmmac_get_time() takes priv->ptp_lock. Using an uninitialized rwlock is undefined behaviour. Move the rwlock_init() to __stmmac_dvr_probe(), together with the other private locks, so that ptp_lock is always valid regardless of the interface state. | ||||
| CVE-2026-97962 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Move representor vnic reporter to eswitch devlink port The representor vnic devlink health reporter is created and destroyed along the representor netdev (un)load path, which is not serialized by the devlink instance lock. Destroying the reporter from there triggers a devl_assert_locked() splat on driver unbind: WARNING: net/devlink/core.c:259 at devl_assert_locked+0x54/0x70, CPU#2: bash/3758 Modules linked in: mlx5_vdpa vringh vdpa mlx5_ib mlx5_fwctl mlx5_core ... CPU: 2 UID: 0 PID: 3758 Comm: bash Tainted: G W 6.19.0+ #1 PREEMPT Tainted: [W]=WARN Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), ... RIP: 0010:devl_assert_locked+0x54/0x70 Call Trace: <TASK> devl_health_reporter_destroy+0x3a/0x1b0 mlx5e_vport_rep_unload+0x12d/0x2b0 [mlx5_core] mlx5_eswitch_unregister_vport_reps+0x1b8/0x220 [mlx5_core] ? __esw_offloads_unload_rep+0x190/0x190 [mlx5_core] ? kernfs_remove_by_name_ns+0xc3/0xf0 device_release_driver_internal+0x3b2/0x560 unbind_store+0xce/0xf0 Move the reporter's lifecycle to the eswitch devlink port (un)register paths, which are already serialized by the devlink instance lock, and store the handle on mlx5_devlink_port. Use the port's mlx5_vport as the reporter priv since the diagnose callback only needs a device handle and a vport number, and mlx5_vport carries both and is initialized before any representor driver probes. | ||||
| CVE-2026-97961 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Allow list_del during perf_event_overflow() A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec() interface to get the PMU call back function pmu::sched_task invoked at schedule in and schedule out. This is achieved by walking along the list anchored by sched_cb_list. The following scenario might lead to a list corruption. perf_pmu_sched_task() for_each_list_entry(..., &sched_cb_list) +--> __perf_pmu_sched_task() +--> event->pmu->sched_task()) +--> PMU_push_sample() +--> perf_event_overflow() +--> __perf_event_overflow() +--> pmu->stop() +--> perf_sched_cb_dec() remove entry from sched_cb_list while list node in use. This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been invoked and perf_event::event_limit hits zero. Prevent the list corruption and convert for_each_list_entry() to for_each_list_entry_safe(). | ||||
| CVE-2026-97960 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/intel: Prevent drain_pebs() reentry The PEBS buffer is shared by all events on a CPU, so drain_pebs() must not be reentered. If so, one instance may observe stale buffer state and potentially access out-of-bound memory. Most invocations happen in NMI context, which naturally prevents reentry. However, drain_pebs() is also reachable from process context via intel_pmu_drain_pebs_buffer(). In those paths, the PMU is often already disabled, but not guaranteed. For example, __intel_pmu_pebs_disable() only disables the target counter, so other active counters can still raise a PMI and interrupt an in-flight drain_pebs(). Here is an example, __perf_addr_filters_adjust() perf_event_stop() __perf_event_stop() x86_pmu_stop() (event->pmu->stop) intel_pmu_disable_event() intel_pmu_pebs_disable() __intel_pmu_pebs_disable() intel_pmu_drain_large_pebs() intel_pmu_drain_pebs_buffer() Introduce __intel_pmu_quiesce() and __intel_pmu_resume() helpers and use them in intel_pmu_drain_large_pebs() to disable the full PMU around the intel_pmu_drain_pebs_buffer() call, preventing reentry. Also add a warning in intel_pmu_drain_pebs_buffer() when the full PMU is not disabled. | ||||
| CVE-2026-97959 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_route: free emptied bucket on filter move route4_change can move an existing filter to a different top-level bucket: route4_set_parms recomputes the handle from TCA_ROUTE4_TO/ FROM/IIF, and the handle-mismatch check is gated on the 'new' flag, so for an existing filter the new handle may differ from the old one and land in a different bucket. When this happens, the filter is unlinked from the old bucket, but the bucket itself is never freed once it goes empty. The stale empty bucket remains in head->table[], causing route4_delete to report *last=false even after the last live filter is gone. That pins the empty tcf_proto and causes a leak. Fix this by refcounting the filters linked to a bucket and freeing the bucket when the count drops to zero. The existing scan in route4_delete goes away with it. The count is updated at all sites that link or unlink a filter during add, change and delete, and the bucket is dropped from head->table[] as soon as it reaches zero. Conditions to recreate the bug: CONFIG_NET_CLS_ROUTE4=y, CONFIG_NET_SCH_INGRESS=y, CONFIG_NET_CLS_ACT=y. tc qdisc replace dev lo clsact tc filter add dev lo ingress protocol ip pref 100 route from 1 to 1 tc filter change dev lo ingress protocol ip pref 100 handle 0x10001 \ route from 1 to 2 tc filter del dev lo ingress protocol ip pref 100 handle 0x10002 \ route from 1 to 2 tc filter show dev lo ingress | grep -c 'pref 100 route chain 0 ' | ||||
| CVE-2026-97958 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: Don't replay RTM_GETCHAIN in tc_ctl_chain(). If a netlink socket sends RTM_GETCHAIN requests repeatedly without recv()ing the responses, tc_ctl_chain() hogs CPU and triggers Hung Task splat. [0] As caught in the stack trace, netlink_attachskb() could confuse tc_ctl_chain() by returning -EAGAIN when the userspace netlink socket's receive buffer is full. The replay: label exists since commit 32a4f5ecd738 ("net: sched: introduce chain object to uapi") but was not used initially. Since commit 9f407f1768d3 ("net: sched: introduce chain templates"), the label is needed for RTM_NEWCHAIN because tcf_proto_lookup_ops() may release RTNL to call request_module(). However, the replay logic is unnecessary for RTM_GETCHAIN. Let's apply the replay logic only for RTM_NEWCHAIN. [0]: INFO: task repro:1018 is blocked on a mutex likely owned by task repro:1022. task:repro state:R running task stack:14096 pid:1022 tgid:1014 ppid:961 task_flags:0x400040 flags:0x00080000 Call Trace: <TASK> ? clockevents_program_event (kernel/time/clockevents.c:372) ? pskb_expand_head (net/core/skbuff.c:615) ? skb_release_data (net/core/skbuff.c:1122) ? netlink_attachskb (./include/linux/skbuff.h:1323 ./include/linux/skbuff.h:1332 net/netlink/af_netlink.c:1232) ? __netlink_lookup (./include/linux/rcupdate.h:882 ./include/linux/rhashtable.h:711 net/netlink/af_netlink.c:499) ? tc_chain_notify (net/sched/cls_api.c:3045) ? tc_chain_notify (./include/linux/skbuff.h:1384 net/sched/cls_api.c:3041) ? netlink_unicast (net/netlink/af_netlink.c:1335) ? rtnl_unicast (./include/net/netlink.h:1198 net/core/rtnetlink.c:985) ? tc_ctl_chain (net/sched/cls_api.c:3242) ? rtnetlink_rcv_msg (net/core/rtnetlink.c:7146) ? netlink_unicast (net/netlink/af_netlink.c:1354) ? __pfx_rtnetlink_rcv_msg (net/core/rtnetlink.c:7177) ? netlink_rcv_skb (net/netlink/af_netlink.c:2556) ? netlink_unicast (net/netlink/af_netlink.c:1319) ? netlink_sendmsg (net/netlink/af_netlink.c:1900) ? __sock_sendmsg (net/socket.c:800) ? __sys_sendto (net/socket.c:2281) ? __x64_sys_sendto (net/socket.c:2288 net/socket.c:2284 net/socket.c:2284) ? do_syscall_64 (arch/x86/entry/syscall_64.c:61 arch/x86/entry/syscall_64.c:84) ? entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> | ||||
| CVE-2026-97957 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: hinic: fix mailbox segment buffer overflow check_mbox_seq_id_and_seg_len() validates that seq_id does not exceed SEQ_ID_MAX_VAL (42) and seg_len does not exceed MBOX_SEG_LEN (48). However, this allows the last segment (seq_id=42) to carry a full 48-byte payload, writing to offset 42*48=2016 for 48 bytes (ending at byte 2064). The receive buffer is only MBOX_MAX_BUF_SZ (2048) bytes, resulting in a 16-byte heap buffer overflow. The hinic3 driver already handles this correctly by defining MBOX_LAST_SEG_MAX_LEN and rejecting the last segment when it exceeds the remaining buffer space. Apply the same fix to the hinic driver. | ||||