Export limit exceeded: 14188 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14188 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-91770 | 2 Gamonoid, Icehrm | 2 Icehrm, Icehrm | 2026-09-17 | 6.5 Medium |
| IceHRM before 36.0.0 fails to validate employee ownership on seven REST sub-resource endpoints, allowing authenticated employees to read any colleague's HR records. Attackers can substitute arbitrary employee IDs in skill, education, certification, language, leave, attendance, and status endpoints to access sensitive personnel data. | ||||
| CVE-2026-90711 | 1 Proxy-addr | 1 Proxy-addr | 2026-09-17 | 9.1 Critical |
| proxy-addr is a Node.js module that determines a request's client address behind trusted reverse proxies, and it backs Express req.ip and req.ips. In versions 1.1.0 through 2.0.7, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. This is a fail-open regression introduced in version 1.1.0. The issue is fixed in proxy-addr 2.0.8, and users should upgrade to 2.0.8 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation. | ||||
| CVE-2026-55617 | 1 Hydro-dev | 1 Hydro | 2026-09-17 | N/A |
| Hydro is a next-generation high-performance online judge platform. From 4.10.4 until 5.0.2, the session recreation logic in packages/hydrooj/src/service/layers/base.ts creates a replacement session token without deleting the previous token from the server-side session token store, so an old sid cookie can remain valid after logout or another renewal flow. An attacker who possesses a victim's previously valid stale cookie can replay it over HTTP or HTTPS without knowing the victim's username or password and without victim interaction at exploitation time. Successful replay can take over the victim's account, disclose private data, and permit unauthorized modification or deletion of data available to that account. This issue is fixed in version 5.0.2. | ||||
| CVE-2026-55178 | 1 Geolens-io | 1 Geolens | 2026-09-17 | 7.5 High |
| GeoLens is a self-hosted geospatial data catalog with semantic search, OGC and STAC APIs, and a map builder. Prior to 1.2.3, multiple read and link endpoints authorize only the resource named in the request URL and fail to re-authorize a second caller-influenced dataset reached through a relationship, map layer, VRT source, externalId lookup, or request body. When a public map references a private dataset, anonymous callers can use GET /maps/{id} and GET /maps/{id}/style.json to obtain the private layer's metadata, sampled values, or vector tiles. The style response can expose a replayable HMAC tile URL that is bound to neither a user nor a map. When a public source dataset has a relationship to a private target dataset, anonymous callers can use the dataset relationship APIs to enumerate the relationship and read rows from the private target's backing table. Anonymous callers can also use GET /collections/datasets/items with an externalId dataset UUID to obtain metadata for any private, restricted, or unpublished dataset because that lookup performs no visibility check. Authenticated users with the default editor role can mosaic another user's private raster into an owned VRT and read its pixels, and POST /ai/metadata/{summary,keywords,lineage,quality-statement} accepts a body-controlled dataset_id without a visibility check and returns private metadata and sample values. Pre-existing vrt_source_links also expose unauthorized member metadata and health unless each member is filtered at read time. These paths can disclose vector geometries and attributes, raster pixels, table rows, table names, column schemas, feature counts, extents, source URLs and filenames, contacts, and sampled row values. This issue is fixed in version 1.2.3. | ||||
| CVE-2026-88065 | 1 Niaefeup | 1 Tts-be | 2026-09-17 | 7.5 High |
| `tts-be` is a backend for a timetable selector that aims to help students better choose their class schedules. Versions prior to 2.1.0 have a Broken Access Control vulnerability across several API endpoints (such as `/api/student/{id}/photo` and `/api/course_unit/{id}/exchange/metadata`). By chaining these unauthenticated endpoints, a remote attacker can use the backend as an open proxy to bypass authorization checks, allowing for the enumeration and extraction of sensitive Personally Identifiable Information (PII) from upstream university systems. The exposed data includes full names, student IDs, class schedules, and photos. This issue was fixed in version 2.1.0. | ||||
| CVE-2026-92395 | 1 Fastify | 1 Proxy-addr | 2026-09-17 | 9.1 Critical |
| @fastify/proxy-addr is a Fastify plugin that determines a request's client address behind trusted reverse proxies, and it backs Fastify request.ip and request.ips. In versions 3.0.0 through 5.1.0, a trust subnet written in IPv4-mapped IPv6 notation with an IPv4-sized prefix, such as ::ffff:10.0.0.0/8 instead of the correct ::ffff:10.0.0.0/104, is accepted without error but trusts every IPv4 address on the internet rather than the block it names. Because the socket peer then becomes trusted at hop 0, any unauthenticated client can supply an arbitrary X-Forwarded-For header and control the address the application reads, which defeats IP-based access control, rate limiting, geolocation, and audit logging. The plugin inherited this defect from the upstream proxy-addr module (CVE-2026-90711). The issue is fixed in @fastify/proxy-addr 5.1.1, and users should upgrade to 5.1.1 or later. As a workaround, ensure any IPv4-mapped IPv6 trust subnet uses a prefix length of at least 97, or express the range in plain IPv4 notation. | ||||
| CVE-2026-61596 | 1 Djust-org | 1 Djust | 2026-09-17 | 7.1 High |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, djust's per-object authorization (`get_object` + `has_object_permission`, ADR-017) was enforced on the WebSocket mount and event paths but not on three other render entry points: (a) the initial HTTP GET render, (b) SPA `url_change` navigation, and (c) `{% live_render %}` embedded child views. An authenticated user could therefore view (and on some paths act on) an object they are not authorized for by loading the page directly, navigating to it via SPA url-change, or composing it as an embedded child — a classic IDOR / broken object-level access control on object-scoped views. This is fixed in djust 1.0.7. All render entry points now route through a shared `enforce_object_permission` chokepoint: HTTP GET returns 403, `url_change` emits a `permission_denied` frame and skips the render, and `{% live_render %}` (eager + lazy) refuses the embed. Views without a custom `get_object` are unaffected (no-op). No reliable workaround short of upgrading. Do not expose object-scoped views through the HTTP-GET / url_change / live_render paths until patched. | ||||
| CVE-2023-32803 | 1 Amazon | 1 Ca-certificates | 2026-09-17 | 7.5 High |
| The ca-certificates package before ca-certificates-2021.2.50-72 for Amazon Linux 2 (AL2) does not properly remove certain TrustCor root certificates from the root store. NOTE: this issue exists because of an incorrect fix for CVE-2022-23491. | ||||
| CVE-2023-37253 | 1 Mediawiki | 1 Proofreadpage | 2026-09-17 | 3.1 Low |
| An issue was discovered in the ProofreadPage extension for MediaWiki through 1.39.3. It leaks information about a suppressed user via the API and config variables. | ||||
| CVE-2026-54618 | 2026-09-17 | 9.4 Critical | ||
| Obsidian Web MCP is a secure remote MCP server for Obsidian vaults. Prior to 0.2.0, /oauth/authorize issues an authorization code without a login, consent, or session check, and /oauth/token can exchange that code for the static VAULT_MCP_TOKEN without authenticating a client. An unauthenticated remote caller who can reach the intended tunnel deployment can therefore call /mcp and use vault_read, vault_write, vault_search, vault_list, vault_move, and vault_delete against the entire vault. Optional PKCE does not prevent an attacker-initiated flow, and unauthenticated /oauth/register also exposes a client_credentials path by returning the configured VAULT_OAUTH_CLIENT_SECRET. This issue is fixed in version 0.2.0. | ||||
| CVE-2026-54495 | 2026-09-17 | 4.3 Medium | ||
| The OpenFeature Operator allows users to expose feature flags to applications. In version 0.9.2 and earlier, a tenant who can create a controller-owned workload can use the openfeature.dev/featureflagsource annotation with NAMESPACE/NAME syntax to reference a FeatureFlagSource or InProcessConfiguration in another namespace. On multi-tenant clusters that use namespaces as trust boundaries, the cluster-scoped operator reads that resource and materializes spec.envVars literal values, spec.httpSyncBearerToken, sync URIs, and supporting ConfigMaps into the tenant's workload. Single-tenant clusters are not impacted, secretKeyRef and configMapKeyRef values remain namespace-local, and creating a FeatureFlagSource is not required. | ||||
| CVE-2026-92045 | 1 Mozilla | 1 Firefox | 2026-09-17 | 6.1 Medium |
| Sandbox escape due to incorrect boundary conditions in the WebRTC component. This vulnerability was fixed in Firefox 156, Firefox ESR 153.3, Thunderbird 156, and Thunderbird 153.3. | ||||
| CVE-2026-92066 | 1 Mozilla | 1 Firefox | 2026-09-17 | 3.4 Low |
| Sandbox escape in the Profile Backup component. This vulnerability was fixed in Firefox 156 and Thunderbird 156. | ||||
| CVE-2026-92962 | 1 Patriksimek | 1 Vm2 | 2026-09-17 | N/A |
| vm2 is a sandbox for running untrusted JavaScript. In vm2 versions up to and including 3.11.3, the defaultSandboxPrepareStackTrace function in lib/setup-sandbox.js builds its output array using prototype-walking index assignment (lines[lines.length] = value) rather than a prototype-bypassing define-property primitive. Because this bridge-internal array is allocated in the sandbox realm, code inside the sandbox can install an accessor on Array.prototype for the relevant index; the accessor is then invoked whenever the sandbox reads error.stack (or otherwise triggers Error.prepareStackTrace), allowing sandbox code to observe and intercept each stack-trace line written by the bridge. The same pattern is used in the error-handling (catch) branch. The values written are formatted strings only, so the practical impact is limited to an information side channel and a violation of vm2's bridge-container defense invariant rather than a sandbox escape; the vendor rates the issue Low. The issue is fixed in vm2 3.11.4, which installs each entry as an own data property via Reflect.defineProperty. | ||||
| CVE-2026-92932 | 2026-09-17 | N/A | ||
| In the MISP sachertortephp library, the Xml::build() static method in lib/Cake/Utility/Xml.php contains a logic error in the conditional that gates network-based XML fetching. The original condition was written as: $options['readFile'] && strpos($input, 'http://') === 0 || strpos($input, 'https://') === 0. Because PHP's && operator has higher precedence than ||, the expression is evaluated as ($options['readFile'] && strpos($input, 'http://') === 0) || strpos($input, 'https://') === 0. As a result, when a caller explicitly sets the readFile option to false to disable file and URL reading, an input string beginning with https:// still satisfies the condition and triggers a network fetch via HttpSocket (configured to follow up to 10 redirects). The http:// branch is correctly gated by the readFile flag, but the https:// branch is not. An attacker who can influence the $input parameter passed to Xml::build() can therefore force the application to issue an outbound HTTPS request to an attacker-controlled or internal URL, even though the caller intended to suppress all remote reads. The fetched response is parsed as XML and may be returned to the caller, enabling information disclosure from internal services or external targets. This constitutes a Server-Side Request Forgery (SSRF) weakness with an information-disclosure impact. The vulnerability requires that the code path in Xml::build() be reachable with attacker-controlled input and that the readFile option be set to false (or the caller expects it to be false). | ||||
| CVE-2026-8674 | 2026-09-17 | 5.3 Medium | ||
| Initializing the DNS stub resolver from an /etc/resolv.conf file, or a LOCALDOMAIN environment variable, whose search list contains a domain of roughly 200 characters or more in the GNU C Library version 2.26 to 2.44 results in an assertion failure which aborts the process. The resolver truncates the search list when copying it into the fixed-size _res.defdname buffer, then asserts that the copy is consistent with the full configuration. The consistency check compared against the wrong size and did not handle a first entry that does not fit, so a correctly truncated list failed the assertion. Any process that resolves names through the library is affected, including long-running processes that reload /etc/resolv.conf on the next query after it changes. Search domains are commonly written to /etc/resolv.conf from data received over DHCP or from a VPN server, so an attacker on the local network may be able to trigger this without privileges on the target system, subject to validation by the network configuration software. | ||||
| CVE-2026-86533 | 1 Team-alembic | 2 Ash Authentication, Ash Authentication Phoenix | 2026-09-17 | N/A |
| Insufficient Session Expiration vulnerability in team-alembic AshAuthentication and AshAuthentication Phoenix allows a revoked session to remain fully authenticated. A resource configured with session_identifier :jti and require_token_presence_for_authentication? disabled stores its session value as <jti>:<subject>. The jti is there so that signing out can revoke that one session. Neither reader consults it: AshAuthentication.Plug.Helpers.authenticate_resource_from_session/4 and AshAuthentication.Phoenix.LiveSession.on_mount/4 both split the value with split_identifier/2, discard the jti and pass the bare subject to AshAuthentication.subject_to_user/3, which reloads the record. The token-presence branch of each function does check its token, calling AshAuthentication.TokenResource.Actions.get_token/3 with the jti and the purpose user. Because the revocation record is never read, neither its revoked state nor its expiry constrains the session, so a session captured before sign-out keeps working. This issue affects ash_authentication: from 4.9.1 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14; ash_authentication_phoenix: from 2.10.0 before 2.17.4 and from 3.0.0-rc.0 before 3.0.0-rc.11. | ||||
| CVE-2026-84860 | 2026-09-17 | 8.8 High | ||
| ScadaLTS 2.8.1-release-candidate build 0 is affected by an Authorization Bypass Spring Security gates DWR endpoints by URL path pattern, but DWR itself dispatches method calls based on the POST body parameters c0-scriptName and c0-methodName. The crossDomainSessionSecurity setting in web.xml is set to false, which disables DWR's built-in origin validation. This means any authenticated user can invoke any DWR method (regardless of the URL-based access control) by sending their request to a URL they are permitted to access (e.g. MiscDwr.initializeLongPoll.dwr) while targeting a restricted class in the POST body. This is the systemic root cause that enables multiple other findings to be exploited as a low privilege user. | ||||
| CVE-2026-82964 | 2026-09-17 | 8.8 High | ||
| Improper preservation of permissions in the Avast sandbox minifilter driver (aswSnx.sys) on Windows allows a local, low-privileged attacker executing inside the sandbox to escape file isolation and escalate to SYSTEM. When the sandbox virtualizes a file it copies the original security descriptor, but the driver opened the virtualization target object with GENERIC_WRITE and FILE_WRITE_ATTRIBUTES only, omitting WRITE_DAC. Every attempt to apply the original DACL therefore failed, and the failure was discarded silently, leaving virtualized copies of sensitive files with permissive permissions. Because the IRP_MJ_CREATE callback additionally did not strip WRITE_DAC for sensitive directories, a sandboxed process could rewrite the security descriptor of a virtualized object, read the virtualized copy of the SAM database, extract local NTLM password hashes and execute code as SYSTEM. The absence of an IRP_MJ_SET_SECURITY callback in the driver's operation registration table is a related defense-in-depth gap, but it is not the control that prevents this attack. | ||||
| CVE-2026-82685 | 1 Team-alembic | 1 Ash Authentication | 2026-09-17 | N/A |
| Authorization Bypass Through User-Controlled Key vulnerability in team-alembic AshAuthentication allows an authenticated attacker to overwrite and confirm another user's email address, and so take over that account. A confirmation token issued to one user is accepted on any other user's record. AshAuthentication.AddOn.Confirmation.ConfirmChange verifies the token's signature and its act claim, then applies the changes stored against that token to whichever record the changeset targets, never comparing the sub claim against changeset.data. An attacker who registers an account and changes their own email replays the resulting token against a victim's record id, writing in their own address with force_change_attributes/2 and stamping confirmed_at, after which an ordinary password reset yields the account. The library's own confirmation flow is unaffected, because AshAuthentication.AddOn.Confirmation.Actions.confirm/3 resolves sub to a user and targets that record. This issue affects ash_authentication: from 0.5.0 before 4.15.0 and from 5.0.0-rc.0 before 5.0.0-rc.14. | ||||