Export limit exceeded: 35533 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (35533 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23121 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mISDN: annotate data-race around dev->work dev->work can re read locklessly in mISDN_read() and mISDN_poll(). Add READ_ONCE()/WRITE_ONCE() annotations. BUG: KCSAN: data-race in mISDN_ioctl / mISDN_read write to 0xffff88812d848280 of 4 bytes by task 10864 on cpu 1: misdn_add_timer drivers/isdn/mISDN/timerdev.c:175 [inline] mISDN_ioctl+0x2fb/0x550 drivers/isdn/mISDN/timerdev.c:233 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl+0xce/0x140 fs/ioctl.c:583 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:583 x64_sys_call+0x14b0/0x3000 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff88812d848280 of 4 bytes by task 10857 on cpu 0: mISDN_read+0x1f2/0x470 drivers/isdn/mISDN/timerdev.c:112 do_loop_readv_writev fs/read_write.c:847 [inline] vfs_readv+0x3fb/0x690 fs/read_write.c:1020 do_readv+0xe7/0x210 fs/read_write.c:1080 __do_sys_readv fs/read_write.c:1165 [inline] __se_sys_readv fs/read_write.c:1162 [inline] __x64_sys_readv+0x45/0x50 fs/read_write.c:1162 x64_sys_call+0x2831/0x3000 arch/x86/include/generated/asm/syscalls_64.h:20 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd8/0x2c0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000000 -> 0x00000001 | ||||
| CVE-2026-41006 | 2 Spring, Vmware | 2 Hateoas, Spring Hateoas | 2026-06-11 | 7.5 High |
| Spring HATEOAS's internal PropertyUtils.createObjectFromProperties method, used by the Collection+JSON and UBER media type deserializers, performs bean property binding via reflection without consulting Jackson access-control annotations. Affected versions: Spring HATEOAS 1.5.0 through 1.5.6; 2.3.0 through 2.3.4; 2.4.0 through 2.4.1; 2.5.0 through 2.5.2; 3.0.0 through 3.0.3. | ||||
| CVE-2026-41847 | 2 Spring, Vmware | 2 Spring Framework, Spring Framework | 2026-06-11 | 4.8 Medium |
| Spring WebFlux applications may be vulnerable to a security bypass when using the Kotlin Router DSL. Affected versions: Spring Framework 5.3.0 through 5.3.48. | ||||
| CVE-2026-7876 | 1 Ibm | 2 Aspera High-speed Transfer Server For Cloud Pak For Integration, Aspera Hsts For Cp4i | 2026-06-11 | 9.1 Critical |
| IBM Aspera HSTS for CP4I 1.5.1 through 1.5.19 is affected by an authentication bypass vulnerability. A transfer client may be able to take advantage of this vulnerability to access files in the server's local storage that they should not have access to, when specific restriction settings are not in place. | ||||
| CVE-2026-1726 | 1 Ibm | 1 Guardium Key Lifecycle Manager | 2026-06-11 | 4.8 Medium |
| IBM Guardium Key Lifecycle Manager 4.1, 4.1.1, 4.2, 4.2.1, 5.0, and 5.1 enables privilege escalation, allowing unauthorized users to perform administrative operations after being demoted. Attackers could access sensitive data, modify system configurations, or change permissions for other users. The issue undermines administrative controls and could lead to data breaches, system compromise, and loss of trust in the application's security mechanisms. | ||||
| CVE-2026-46170 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: ADD_ADDR rtx: free sk if last When an ADD_ADDR is retransmitted, the sk is held in sk_reset_timer(), and released at the end. If at that moment, it was the last reference being held, the sk would not be freed. sock_put() should then be called instead of __sock_put(). But that's not enough: if it is the last reference, sock_put() will call sk_free(), which will end up calling sk_stop_timer_sync() on the same timer, and waiting indefinitely to finish. So it is needed to mark that the timer is done at the end of the timer handler when it has not been rescheduled, not to call sk_stop_timer_sync() on "itself". | ||||
| CVE-2026-46192 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: don't attempt to transmit during emulated read-only dual/quad operations The core will deal with reads by creating clock cycles itself, there's no need to generate clock cycles by transmitting garbage data at the driver level. Further, transmitting garbage data just bricks the transfer since QSPI doesn't have a dedicated master-out line like MOSI in regular SPI. I'm not entirely sure if the transfer is bricked because of the garbage data being transmitted on the bus or because the core loses track of whether it is supposed to be sending or receiving data. | ||||
| CVE-2026-46179 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Don't allow pointer operations on unconfigured streams When reporting the pointer for a compressed stream we report the current I/O frame position by dividing the position by the number of channels multiplied by the number of container bytes. These values default to 0 and are only configured as part of setting the stream parameters so this allows a divide by zero to be configured. Validate that they are non zero, returning an error if not | ||||
| CVE-2026-46181 | 1 Linux | 1 Linux Kernel | 2026-06-11 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx4: Fix mis-use of RCU in mlx4_srq_event() Sashiko points out the radix_tree itself is RCU safe, but nothing ever frees the mlx4_srq struct with RCU, and it isn't even accessed within the RCU critical section. It also will crash if an event is delivered before the srq object is finished initializing. Use the spinlock since it isn't easy to make RCU work, use refcount_inc_not_zero() to protect against partially initialized objects, and order the refcount_set() to be after the srq is fully initialized. | ||||
| CVE-2026-46168 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix scheduling with atomic in timestamp sockopt Using lock_sock_fast() (atomic context) around sock_set_timestamp() and sock_set_timestamping() is unsafe, as both helpers can sleep. Replace lock_sock_fast() with sleepable lock_sock()/release_sock() to avoid scheduling while atomic panic. | ||||
| CVE-2026-7500 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-10 | 5.4 Medium |
| When Keycloak is started with `--features-disabled=account,account-api`, the Account REST API is only partially disabled. Five endpoints under the versioned path `/account/v1alpha1` remain fully functional — including both read and write operations — because they lack the `checkAccountApiEnabled()` gate that correctly blocks four other endpoints in the same REST service class. The user needs to have permissions to use the API. | ||||
| CVE-2026-46148 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: microchip-core-qspi: control built-in cs manually The coreQSPI IP supports only a single chip select, which is automagically operated by the hardware - set low when the transmit buffer first gets written to and set high when the number of bytes written to the TOTALBYTES field of the FRAMES register have been sent on the bus. Additional devices must use GPIOs for their chip selects. It was reported to me that if there are two devices attached to this QSPI controller that the in-built chip select is set low while linux tries to access the device attached to the GPIO. This went undetected as the boards that connected multiple devices to the SPI controller all exclusively used GPIOs for chip selects, not relying on the built-in chip select at all. It turns out that this was because the built-in chip select, when controlled automagically, is set low when active and high when inactive, thereby ruling out its use for active-high devices or devices that need to transmit with the chip select disabled. Modify the driver so that it controls chip select directly, retaining the behaviour for mem_ops of setting the chip select active for the entire duration of the transfer in the exec_op callback. For regular transfers, implement the set_cs callback for the core to use. As part of this, the existing setup callback, mchp_coreqspi_setup_op(), is removed. Modifying the CLKIDLE field is not safe to do during operation when there are multiple devices, so this code is removed entirely. Setting the MASTER and ENABLE fields is something that can be done once at probe, it doesn't need to be re-run for each device. Instead the new setup callback sets the built-in chip select to its inactive state for active-low devices, as the reset value of the chip select in software controlled mode is low. | ||||
| CVE-2026-46145 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Validate rx_hash_key_len Sashiko points out that rx_hash_key_len comes from a uAPI structure and is blindly passed to memcpy, allowing the userspace to trash kernel memory. Bounds check it so the memcpy cannot overflow. | ||||
| CVE-2026-46144 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana: Fix error unwind in mana_ib_create_qp_rss() Sashiko points out that mana_ib_cfg_vport_steering() is leaked, the normal destroy path cleans it up. | ||||
| CVE-2026-11653 | 4 Apple, Google, Linux and 1 more | 4 Macos, Chrome, Linux Kernel and 1 more | 2026-06-10 | 6.5 Medium |
| Inappropriate implementation in Extensions in Google Chrome prior to 149.0.7827.103 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-46176 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init() mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When ib_create_srq() fails for s1, the error branch destroys s0 but falls through and unconditionally assigns the freed s0 and the ERR_PTR s1 to devr->s0 and devr->s1. This leads to several problems: the lock-free fast path checks "if (devr->s1) return 0;" and treats the ERR_PTR as already initialised; users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences the ERR_PTR and double-frees s0 on teardown. Fix by adding the same `goto unlock` in the s1 failure path. | ||||
| CVE-2026-46175 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix fsck inconsistency caused by FGGC of node block During FGGC node block migration, fsck may incorrectly treat the migrated node block as fsync-written data. The reproduction scenario: root@vm:/mnt/f2fs# seq 1 2048 | xargs -n 1 ./test_sync // write inline inode and sync root@vm:/mnt/f2fs# rm -f 1 root@vm:/mnt/f2fs# sync root@vm:/mnt/f2fs# f2fs_io gc_range // move data block in sync mode and not write CP SPO, "fsck --dry-run" find inode has already checkpointed but still with DENT_BIT_SHIFT set The root cause is that GC does not clear the dentry mark and fsync mark during node block migration, leading fsck to misinterpret them as user-issued fsync writes. In BGGC mode, node block migration is handled by f2fs_sync_node_pages(), which guarantees the dentry and fsync marks are cleared before writing. This patch move the set/clear of the fsync|dentry marks into __write_node_folio to make the logic clearer, and ensures the fsync|dentry mark is cleared in FGGC. | ||||
| CVE-2026-46177 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: Add limits to event and receive message requests The driver would just fetch events and receive messages until the BMC said it was done. To avoid issues with BMCs that never say they are done, add a limit of 10 fetches at a time. In addition, an si interface has an attn state it can return from the hardware which is supposed to cause a flag fetch to see if the driver needs to fetch events or message or a few other things. If the attn bit gets stuck, it's a similar problem. So allow messages in between flag fetches so the driver itself doesn't get stuck. This is a more general fix than the previous fix for the specific bad BMC, but should fix the more general issue of a BMC that won't stop saying it has data. This has been there from the beginning of the driver. It's not a bug per-se, but it is accounting for bugs in BMCs. | ||||
| CVE-2026-46172 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: xfrm6: release dst on error in xfrm6_rcv_encap() xfrm6_rcv_encap() performs an IPv6 route lookup when the skb does not already have a dst attached. ip6_route_input_lookup() returns a referenced dst entry even when the lookup resolves to an error route. If dst->error is set, xfrm6_rcv_encap() drops the skb without attaching the dst to the skb and without releasing the reference returned by the lookup. Repeated packets hitting this path therefore leak dst entries. Release the dst before jumping to the drop path. | ||||
| CVE-2026-46229 | 1 Linux | 1 Linux Kernel | 2026-06-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Clear VRAM on allocation to prevent stale data exposure KFD VRAM allocations set AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE but not AMDGPU_GEM_CREATE_VRAM_CLEARED, leaving freshly allocated VRAM with stale data from prior use observable by compute kernels. The GEM ioctl path already sets VRAM_CLEARED for all userspace allocations via amdgpu_gem_create_ioctl() and amdgpu_mode_dumb_create(). The KFD path was missing this flag, allowing stale page table remnants to leak into user buffers. This causes crashes in RCCL P2P transport where non-zero data in ptrExchange/head/tail fields corrupts the protocol handshake. | ||||