Export limit exceeded: 398347 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398347 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97967 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Remove debugfs entries when probe fails ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. If hwmon_device_register_with_info() fails right after it, ccp_probe() returns without removing them: the HID core then frees ccp, and ccp_remove() is not called for a failed probe, so the files stay behind. Reading one of them dereferences the freed pointer. Remove the debugfs entries on that error path. debugfs_remove_recursive() waits for readers already inside the show callbacks, so ccp is no longer reachable through debugfs by the time probe returns. | ||||
| CVE-2026-97968 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Create debugfs entries after hwmon registration ccp_debugfs_init() registers debugfs files whose private data is the devm allocated ccp. It runs before hwmon_device_register_with_info(), so when that registration fails, ccp_probe() returns with the files still in place. The HID core then frees ccp, and ccp_remove() is not called for a failed probe, so nothing removes them later either. Reading one of the files dereferences the freed pointer. Create the debugfs entries only after the hwmon device has been registered, so no failing path can leave them behind. The two version queries stay where they are. They send USB commands without holding ccp->mutex, which is only safe as long as nothing else can call send_usb_cmd(); once the hwmon device is registered its callbacks can do so concurrently. Only the debugfs creation moves, and it is told which queries succeeded. | ||||
| CVE-2026-97969 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Fix clock leak and spurious timer in settimeout() msc313e_wdt_settimeout() unconditionally calls msc313e_wdt_start() which introduces two severe bugs: 1. If the watchdog is already active, calling start() again will increase the reference count of the clock again. However stop() is only called once, the reference count is unbalance. 2. If the watchdog is stopped, calling settimeout() will start the hardware timer accidentally. Factor out the register-writing logic into a helper function. Only call it in settimeout() if the watchdog is running. Otherwise, simply update `wdev->timeout`. | ||||
| CVE-2026-97970 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: watchdog: msc313e: Avoid division by zero clk_get_rate() could return 0. Avoid a division by zero panic. | ||||
| CVE-2026-97977 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: Fix UAF of btusb_data by rx_work btusb_close() and btusb_flush() cancel data->rx_work with the asynchronous cancel_delayed_work(), so if btusb_rx_work() is already running on another CPU it keeps running after the cancel returns. btusb_disconnect() calls hci_unregister_dev(), which invokes btusb_close(), and then frees the btusb_data. A still running btusb_rx_work() then dereferences the freed data: while ((skb = skb_dequeue(&data->acl_q))) data->recv_acl(data->hdev, skb); Use cancel_delayed_work_sync() instead. In btusb_close() the cancel also has to happen after btusb_stop_traffic(), otherwise an URB completion racing with the cancel can requeue the work right after it has been waited for. | ||||
| CVE-2026-97866 | 1 Zhonglun | 1 Cloudpos | 2026-09-25 | 5.6 Medium |
| A weakness has been identified in Zhonglun CloudPOS 3.0. Affected by this vulnerability is an unknown functionality of the file Program.cs of the component Automatic Update. Executing a manipulation of the argument version/url/packagekey/package name can lead to channel accessible by non-endpoint. The attack can be launched remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-74304 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device hu->serdev is NULL for hci_uart attached via non-serdev paths, but qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev) and dereferences the result, causing a NULL pointer dereference. Fix by guarding the dereference with a NULL check, consistent with the rest of qca_setup(). | ||||
| CVE-2026-72463 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: Fix dev use-after-free in xfrm async resumption xfrm async resumption hold skb->dev refcnt until after transport_finish. However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking device reference, such as vti_rcv_cb. The subsequent async resumption will decrement the tunnel device's reference count, which lead to uaf of tunnel dev and refcnt leak of orig dev as below: unregister_netdevice: waiting for vti1 to become free. Usage count = -2 Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set by xfrm_rcv_cb can race with device teardown. Extend rcu protection over xfrm_rcv_cb and transport_finish to prevent races. | ||||
| CVE-2026-72315 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq. | ||||
| CVE-2026-98154 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: fix -EIO cleanup order in queue_rq On -EIO, the RDMA queue_rq path reports a host path error and then still cleans up the command and unmaps the SQE DMA. The path error helper completes the request, so that is double cleanup and DMA unmap after the request is already complete. Unmap the SQE first, then report the host path error. Skip the outer command cleanup on that path. | ||||
| CVE-2026-98116 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Serialize PCM mmap with buffer reallocation to fix page UAF snd_pcm_hw_params() and snd_pcm_hw_free() guard buffer reallocation with an mmap_count check performed under the PCM stream lock, but the lock is released long before the buffer is actually freed: snd_pcm_sync_stop(), constraint refinement and do_free_pages() all happen in between. snd_pcm_mmap_data(), on the other hand, takes no lock at all: it validates against the old buffer's state and dma_bytes, remaps its pages into the VMA, and only then increments mmap_count. A concurrent mmap() can therefore slip in between the check and the free. remap_pfn_range() installs writable PTEs for the old buffer's pages without taking page references, and the subsequent do_free_pages() returns those pages to the page allocator while the VMA still maps them. This leaves a stale, writable mapping of freed pages: a page-level use-after-free that can be leveraged for local privilege escalation. Make snd_pcm_mmap_data() participate in the buffer-access scheme introduced for hw_params/hw_free: acquire runtime->buffer_accessing before validating and remapping, and release it afterwards. Buffer reallocation already fails with -EBUSY while accessors are active, and the mmap side now fails with -EBUSY while a reallocation is in progress, so the validate/remap sequence and the check/free sequence can no longer interleave. A reproducer that turns this race into a stale writable mapping of the freed DMA buffer pages is available on request. | ||||
| CVE-2026-98112 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix listener task lifetime on netdev events The listener thread exits when its listening socket is shutdown. The netdevice notifier shuts down the socket before calling kthread_stop(), so the task_struct can be freed before kthread_stop() gets its reference. Create the listener in a stopped state and hold an extra task_struct reference until kthread_stop_put() completes. Also stop and release listeners before freeing their interface records during TCP teardown. | ||||
| CVE-2026-97991 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_blk: reject out-of-range sector starts vdpasim_blk_check_range() logs an invalid start sector but continues validating the request. The subsequent unsigned capacity subtraction can underflow and let an out-of-range buffer offset reach the data path. The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT copies guest data to blk->buffer + offset through vringh_iov_pull_iotlb(), causing an out-of-bounds write in _copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from blk->buffer + offset to the guest through vringh_iov_push_iotlb(), causing an out-of-bounds read in _copy_to_iter(). VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(), causing an out-of-bounds write. Reject starts at or beyond the capacity before the subtraction. Treat the capacity boundary as invalid because the IN and OUT paths round byte counts down to sectors for validation but later copy the original byte counts. A sub-sector request at the capacity boundary would otherwise still access past the end of the buffer. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-97990 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa_sim_net: check TX pull result before RX copy vringh_iov_pull_iotlb() returns a signed byte count. A failed TX pull is currently added to the unsigned byte counter and then passed as a size_t length to receive_filter() and vringh_iov_push_iotlb(). A negative error can therefore become a large length in the RX path. Handle non-positive pull results before every length use. Count the TX error and complete the consumed TX descriptor with zero bytes. I found this bug myself, though the patch was written with AI assistance. | ||||
| CVE-2026-97903 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exit: hold a reference to thread_pid across proc_flush_pid Commit 0a36bad01731 ("release_task: kill the no longer needed get/put_pid(thread_pid)") removed the reference around proc_flush_pid(). It assumed that free_pids(post.pids) at the end of release_task() would keep thread_pid alive until then. That assumption is wrong. __change_pid() only records a detached PID in post.pids when pid_has_task() is false for every PIDTYPE. If another task still uses the exiting task's PID as its process group or session ID, __unhash_process() removes the exiting task's PIDTYPE_PID link but leaves the PID out of post.pids. release_task() therefore holds no reference to it after dropping tasklist_lock. The other task can then remove the remaining PIDTYPE links. Its free_pids() call schedules delayed_put_pid(), and the RCU callback can free the PID before the first release_task() reaches proc_flush_pid(). An unprivileged reproducer races wait4(-1) against setsid() to trigger this ordering. Three of three fresh v7.2 KASAN boots reported: BUG: KASAN: slab-use-after-free in proc_invalidate_siblings_dcache+0x3e2/0x3f0 Read of size 8 by task h7_pid_reaper/1921 Call Trace: proc_invalidate_siblings_dcache release_task wait_consider_task __do_wait do_wait kernel_wait4 Freed by task 0: kmem_cache_free put_pid delayed_put_pid rcu_core Last potentially related work creation: __call_rcu_common free_pids ksys_setsid KASAN identified a 144-byte object from the pid cache and located the bad read 80 bytes into the freed object, matching pid->inodes. With an explicit reference, three of three fresh boots completed without a KASAN report. The concurrent RCU callback dropped its reference while proc_flush_pid() was protected, and the balancing put_pid() performed the final free afterward. Take a reference before __unhash_process() clears p->thread_pid and release it after proc_flush_pid() completes. A tested source reproducer is available privately on request. No controlled read or write, information leak, or privilege escalation is claimed. The mainline patch applies directly to v6.19.y and newer; v6.16.y through v6.18.y need a context-adjusted backport. | ||||
| CVE-2026-97594 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: landlock: Fix use-after-free of the source's parent directory current_check_refer_path() reads old_dentry->d_parent without holding a reference nor a lock on it, and then dereferences it in collect_domain_accesses() and in the audit record. A reference on a child does not pin its parent: __d_move() reassigns dentry->d_parent and drops the reference the child held on its former parent. hook_path_rename() is not affected because the rename path calls lock_rename() before the hook, so the source cannot be reparented under it. hook_path_link() has no such protection: filename_linkat() holds a reference on the source dentry but neither locks nor references its parent, so a concurrent rename(2) can reparent the source while security_path_link() runs, and the former parent can then be removed and freed while the hook walks it. A process can trigger this after entering a Landlock domain that handles at least one filesystem access right. The process can then race a linkat(2) loop against rename(2) and rmdir(2): BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290 Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549 collect_domain_accesses+0x278/0x290 current_check_refer_path+0x952/0x1120 security_path_link+0x1be/0x320 filename_linkat+0x342/0x6d0 __x64_sys_linkat+0xfa/0x150 Freed by task 562: kmem_cache_free+0x139/0x4c0 i_callback+0x4b/0x80 rcu_core+0x7dc/0x10a0 Take a reference on the dentry selected as the source parent, using dget() for the common-mount-root case and dget_parent() otherwise. Release it after the hierarchy walk and synchronous audit logging. [mic: Clarify the caller, reachability, and reference handling] | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97573 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle buffer allocation failure in bnxt_rx_ring_reset() bnxt_rx_ring_reset() frees the ring buffers and then reallocates them, ignoring the result. bnxt_alloc_one_rx_ring() can fail in bnxt_alloc_one_tpa_info_data(), which returns -ENOMEM on the first failed allocation and leaves the remaining rxr->rx_tpa[] entries zeroed. The error isn't propagated up, so the loop in bnxt_rx_ring_reset continues and at the end the code re-enables TPA with partially unallocated rx_tpa array. This means that when the agg_id from hardware is mapped to a SW index in rxr->rx_tpa[], an uninitialized slot can be chosen which would hand a zero DMA address to the device. Fix this by falling back to a global reset, which is what the existing code already does when other functions fail, but unlike the other failure cases this particular failure has to return because TPA can't be re-enabled since the allocation failed. | ||||
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||
| CVE-2026-97527 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Serialize NVMe unsol ctx list with a per-fcport lock The fcport->unsol_ctx_head list is modified from several contexts without a common lock. Entries are added in qla2xxx_process_purls_iocb() from the response queue ISR (under the qpair qp_lock), while they are removed from qla2xxx_process_purls_pkt() (DPC/purex worker), qla_nvme_xmt_ls_rsp() (NVMe-FC transport callback) and qla_nvme_release_lsrsp_cmd_kref() (SRB completion). The qpair qp_lock cannot serialize this per-fcport list since multiqueue adapters add entries through different qpairs, so a concurrent add and delete (or two concurrent deletes) can corrupt the list pointers. Introduce a dedicated per-fcport spinlock, unsol_ctx_lock, initialized in qla2x00_alloc_fcport(), and take it around every list_add_tail()/list_del() on unsol_ctx_head. The add nests under the existing qp_lock; no delete path takes qp_lock, so the lock order is consistent and deadlock free. | ||||