Export limit exceeded: 398168 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398168 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97913 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure cmd stream ends with a stop op While the QSIZE register setting should prevent an out of bounds access of the command stream, it is not clear whether the h/w generates an interrupt in this case as is required (to prevent a timeout). As a stop op is expected end of the command stream, let's just ensure it is present. A stop op in the middle of the command stream also makes no sense. | ||||
| CVE-2026-97912 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Ensure SRAM size is 0 on mapping failure On a mapping failure of the SRAM, the SRAM size is left as non-zero. The probe will succeed as the error return is not checked since having SRAM is not a hard requirement. The non-zero size allows jobs to access SRAM which is left pointing to physical base address 0x0. | ||||
| CVE-2026-97908 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev The command and ACL RPMsg endpoints store struct btqcomsmd as their callback private data. The receive callbacks dereference btq->hdev without taking an hci_dev reference. The current teardown order frees the hci_dev before destroying the RPMsg endpoints in both the hci_register_dev() error path and the driver remove path. If WCNSS delivers data in that window, the endpoint callback can run with an already freed hci_dev and pass it to the Bluetooth core. For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears the callback under the channel recv_lock. The receive path holds the same lock while invoking the callback, so destroying the endpoints first both prevents new callbacks and serializes with any callback already running. Destroy the command and ACL endpoints before hci_free_dev(). Keep hci_unregister_dev() first during remove so the HCI core stops issuing operations before the transport endpoints are shut down. In the full registration-error cleanup path, return directly after freeing the hci_dev to avoid falling through to the partial-construction labels and destroying the endpoints twice. | ||||
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97902 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't return -EINVAL for successful nested thaw Commit 7366f8b6fc6a ("fs: handle freezing from multiple devices") replaced the freeze_holders bitmask with per-holder counters to allow nested freezes. In the bitmask version, a thaw that released a shared hold while another holder remained returned 0. Since the rework, thaw_super_locked() drops the freeze reference via freeze_dec() but then returns -EINVAL when other freezers remain, misinforming the caller: the thaw did succeed, the superblock just stays frozen for the remaining holders. This breaks bdev-initiated freezing. When a filesystem is frozen with FIFREEZE and additionally frozen via bdev_freeze() -- which nests by design, see fs_bdev_freeze() -- the subsequent bdev_thaw() receives -EINVAL from the holder op although its freeze reference was dropped, and therefore keeps bd_fsfreeze_count elevated. Then device-mapper's unlock_fs() ignores bdev_thaw()'s return value, so nothing rebalances the count. After the user's FITHAW and umount, the block device can never be mounted again: dm-1: Can't mount, blockdev is frozen There is no way for userspace to drop the leaked count; only destroying the block device (or a reboot) recovers the device. Reproducer (any kernel since v6.8): dmsetup create dut --table "0 $(blockdev --getsz "$DEV") linear $DEV 0" mkfs.ext4 /dev/mapper/dut mount /dev/mapper/dut /mnt fsfreeze --freeze /mnt # freeze_ucount == 1 dmsetup suspend dut # bd_fsfreeze_count == 1, ucount == 2 dmsetup resume dut # ucount 2 -> 1, but thaw_super() # returns -EINVAL, so bdev_thaw() # keeps bd_fsfreeze_count at 1 fsfreeze --unfreeze /mnt # filesystem thaws fine umount /mnt mount /dev/mapper/dut /mnt # EBUSY, forever The same happens with fsfreeze held across an LVM snapshot of the origin volume. fs_bdev_thaw()'s documentation already describes the intended semantics: "If this function returns zero it doesn't mean that the filesystem is unfrozen as it may have been frozen multiple times". Restore them by returning 0 when a nested thaw drops its hold while other freezers remain. Thawing without holding a freeze still fails with -EINVAL as may_unfreeze() rejects that case before the reference count is touched. | ||||
| CVE-2026-97901 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: genetlink: pin family module during policy dump The generic netlink controller's policy dump keeps pointers to the target family's operation and policy tables in its callback state. A dump may be split across multiple skbs and remain pending after the initial request. Netlink pins the module which owns the dump callback, but in this case that is the controller's owner rather than the target family's owner. The target family can consequently be unregistered and its module unloaded while a policy dump is pending. Advancing the dump then dereferences policy memory from the unloaded module. Take a reference to the target family's module when the dump starts. Drop it from the error and done paths. This matches the lifetime for which the dump context retains the family and policy pointers. | ||||
| CVE-2026-97900 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/drm_exec: fix up contended obj when num_objects is 0 drm_exec_prepare_array() silently returns success without calling drm_exec_lock_contended() when num_objects is zero. This breaks the invariant upheld by drm_exec_lock_obj(), where every entry point into the locking sequence must first attempt to lock any previously contended object before proceeding. Drivers that chain multiple drm_exec_prepare_array() calls per drm_exec_until_all_locked() iteration (e.g. amdgpu's userq signal/wait ioctls, which prepare separate read and write BO arrays) can pass an empty array for one of the two calls. If contention is hit while preparing the non-empty array, exec->contended is set and the loop retries; on retry, the empty-array call preceding it is a no-op that never clears exec->contended, so drm_exec_retry_on_contention() immediately jumps back to the top of the loop without ever reaching the call that would resolve the contention. This spins forever. Fix it by having drm_exec_prepare_array() call drm_exec_lock_contended() directly when num_objects is zero, so a pending contended object dont loop infinitely. | ||||
| CVE-2026-97621 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: fix unchecked bound endpoint name length rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree path into a 32-byte stack buffer. Device tree paths are not limited to this size, so a sufficiently long path can overflow the buffer. Use snprintf() with the destination size to truncate the generated name and keep the writes within bounds. | ||||
| CVE-2026-97619 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/rw: end write accounting from ->ki_complete Commit b000145e9907 moved both the fsnotify calls and the write accounting out of the kiocb completion handler and into the io_req_rw_complete() task_work. However, only the fsnotify part actually needed to move as it may sleep. Ending the write accounting is just a percpu_up_read() on the superblock writers sem. Deferring it is a problem, because it makes dropping SB_FREEZE_WRITE protection depend on the ring owner getting to running task_work. But the task may be blocked in freeze_super(), causing it to never get to that: task io-wq worker -------------------------------------------------------------- io_write() io_kiocb_start_write() (takes sb_writers, hidden from lockdep by __sb_writers_release) write_iter() -> -EIOCBQUEUED ioctl(FS_IOC_SHUTDOWN) bdev_freeze() freeze_super() percpu_down_write() <- waits for the reader above io_write() kiocb_start_write() percpu_down_read() <- queued behind the writer <bio completes> io_complete_rw() queues io_req_rw_complete() <- never runs, task is in D state End the write from io_complete_rw() instead, and leave only the fsnotify calls in task_work. | ||||
| CVE-2026-97617 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Check resize_disabled before publishing the new subbuf order ring_buffer_subbuf_order_set() stores the new order and only then walks the CPUs, returning -EBUSY if any of them has resizing disabled. A user mapped buffer has resizing disabled, and __rb_map_vma() reads buffer->subbuf_order without buffer->mutex, so an mmap of an already mapped CPU racing the failing order change sizes the mapping with the new order and inserts pages past the sub-buffer into the VMA. Check the CPUs before storing the new order. | ||||
| CVE-2026-97615 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: use option bits for CFM/MRP frame handlers CFM and MRP register a global br_frame_type whose hlist_node is linked into the per-bridge frame_type_list when the first MEP/MRP instance is created. Enabling the protocol on multiple bridges therefore inserts the same node into multiple lists. Unregistering it on one bridge then corrupts list state belonging to another. These handlers can only be installed once per bridge, and they are uncommon. Track their per-bridge enable state with net_bridge option bits, which already live on the Rx hot cache line, and dispatch the matching handler directly from the receive path. Check both bits together first as an unlikely case. Remove the generic frame_type_list and br_frame_type helpers, which have had no other users since CFM and MRP were added. That shrinks struct net_bridge by 8 bytes and drops the list walk from the fast path. When neither protocol is compiled in, BR_CFM_MRP_OPTS is 0 and the compiler prunes the branch. | ||||
| CVE-2026-97613 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: Reserve extra CQ slot for the fence completion CQE The RX completion queue is sized to hold exactly one CQE per posted RX WQE. MANA_FENCE_RQ makes hardware post an additional CQE_RX_OBJECT_FENCE after the packet CQEs. The current sizing reserves no extra slot for it and in rare cases, CQ has no guaranteed slot for the fence CQE when it is full of packet CQEs. This can lead to dropping the fence completion while the driver waits holding RTNL lock throughout the timeout duration. Reserve one extra CQE slot for CQE_RX_OBJECT_FENCE. mana_gd_alloc_memory() requires queue_size to be a power-of-two and at least MANA_PAGE_SIZE; the reservation pushes cq_size past a power-of-two, so round up the CQ size in mana_create_rxq(). | ||||
| CVE-2026-97606 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: autofs: fix memory leak in autofs_fill_super() In autofs_fill_super(), we create a new inode using autofs_new_ino(), however, if we fail to create root_inode, (that is, root_inode failure path), we return -ENOMEM without freeing the new inode(ino) that we created causing a memory leak. Fix this by adding autofs_free_ino() to free the inode we created in root_inode failure path before returning ENOMEM. | ||||
| CVE-2026-97605 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: erofs: preserve LZMA decoders on resize failure The pool-resize path frees each stream's old decoder before allocating its replacement. If an allocation fails after some streams have already been replaced, the failed stream is put back on the list with state == NULL. z_erofs_lzma_max_dictsize is still advanced as if the whole pool had been resized. An existing LZMA mount can select the broken stream and pass NULL to xz_dec_microlzma_reset(). A retry at the same size also skip another resize attempt. Since the global maximum was advanced, thus, the invalid state is left unrepaired. Allocate each replacement before freeing the old decoder, temporarily retaining one old decoder during allocation. Stop at the first failure and advance z_erofs_lzma_max_dictsize only after all streams satisfy the request. Record each stream's dictionary capacity so retries can skip streams already enlarged before a partial failure. | ||||
| CVE-2026-97604 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: vfb: defer cleanup until the last reference FBIOGETCMAP takes a shallow snapshot of info->cmap and performs the usercopy after dropping info->lock. vfb_remove() frees the colormap immediately after unregistering the framebuffer, even when an open file still holds a reference to fb_info. A concurrent driver unbind can therefore free the colormap while the ioctl copies it to userspace. KASAN reports: BUG: KASAN: slab-use-after-free in _copy_to_user Read of size 512 by task poc/125 _copy_to_user (./include/linux/instrumented.h:129 ./include/linux/uaccess.h:201 lib/usercopy.c:24) fb_cmap_to_user (./include/linux/uaccess.h:230 drivers/video/fbdev/core/fbcmap.c:211) do_fb_ioctl (drivers/video/fbdev/core/fb_chrdev.c:114) Allocated by task 1: fb_alloc_cmap_gfp (./include/linux/slab.h:973 ./include/linux/slab.h:1290 drivers/video/fbdev/core/fbcmap.c:108) vfb_probe (drivers/video/fbdev/vfb.c:459) Freed by task 124: fb_dealloc_cmap (drivers/video/fbdev/core/fbcmap.c:151) vfb_remove (drivers/video/fbdev/vfb.c:489) unregister_framebuffer() drops the registration reference, and fbdev calls fb_destroy after the last put_fb_info(). Move the registered framebuffer's cleanup into an fb_destroy callback so its colormap and screen buffer stay alive until all file references have been released. | ||||
| CVE-2026-97601 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: 6lowpan: fix NULL dereference in lowpan_newlink TUNSETLINK allows a TUN device to change its link-layer type to ARPHRD_IEEE802154 without initializing ieee802154_ptr. lowpan_newlink() checks only the device type before dereferencing the pointer, so an RTM_NEWLINK request can trigger a NULL pointer dereference. Reject devices without ieee802154_ptr along with devices of the wrong type. | ||||
| CVE-2026-97596 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: reject invalid states in connection template sync records IPVS sync receivers validate protocol states before creating or updating a connection. For connection templates, however, they only log states outside the template state range and still store the value in the connection. A template can be returned by ordinary connection lookup. TCP and SCTP then use the invalid state as an index into their transition tables. Reject invalid template states in both sync protocol versions before looking up or modifying a connection. The version 1 path handles both IPv4 and IPv6 records. | ||||
| CVE-2026-97592 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with AES ctr and gcm algorithm In function ctr_aes_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. When the buffer is used explicitly scrub it at the end of the code block to avoid exposure of maybe sensitive data. In a similar way the function gcm_aes_crypt() hat an error path where the CPACF param block was not scrubbed. Instead of return early now these error paths go to end of function where explicit scrubbing is done. Similar with the buffers which are part of the gcm_sg_walk structs from the variables gw_in and gw_out. | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97586 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing kunmap in afs_dir_search_bucket() Fix afs_dir_search_bucket() to kunmap the block it's using in the "bad:" path. | ||||