Export limit exceeded: 398492 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (398492 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98007 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject non-scalar bpf_loop iteration counts bpf_loop() declares its nr_loops argument as ARG_ANYTHING. Privileged programs may pass pointer values to such arguments, so check_func_arg() lets a pointer-valued R1 reach the helper-specific checks. Since commit bb124da69c47 ("bpf: keep track of max number of bpf_loop callback iterations"), the verifier marks R1 precise and reads its upper bound to limit callback simulation. Precision backtracking only accepts scalar registers, so passing a pointer instead triggers the "backtracking misuse" verifier warning. Kernels with panic_on_warn enabled subsequently panic. Introduce ARG_SCALAR for helper arguments that only accept scalar values and use it for bpf_loop() nr_loops. Generic helper argument validation then rejects pointers before loop inlining and precision processing. | ||||
| CVE-2026-98008 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: fix NULL pointer dereference on unbind with fixed-link When the device tree describes a fixed-link and has no "mdio" child node, macb_mii_init() returns early without allocating the MDIO bus, leaving bp->mii_bus as NULL. Two cleanup paths then dereference this NULL bus: 1. On driver unbind, macb_remove() unconditionally calls mdiobus_unregister(bp->mii_bus), which oopses: Unable to handle kernel NULL pointer dereference at virtual address 00000000000004a8 pc : mdiobus_unregister+0x14/0xa4 lr : macb_remove+0x38/0xa4 Call trace: mdiobus_unregister+0x14/0xa4 (P) macb_remove+0x38/0xa4 platform_remove+0x20/0x30 device_release_driver_internal+0x1c8/0x224 unbind_store+0xb4/0xbc 2. On the probe error path in macb_probe(), reached when macb_mii_init() has succeeded but a subsequent step fails, the err_out_unregister_mdio label runs the same unconditional cleanup. mdiobus_unregister() and mdiobus_free() do not guard against a NULL bus, so guard the calls in both macb_remove() and the probe error path. | ||||
| CVE-2026-100079 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: unregister debugfs entries on teardown ucsi_register() creates per-instance debugfs entries, but ucsi_unregister() keeps them around until ucsi_destroy(). Drivers like ucsi_glink that unregister/register the same UCSI instance across remoteproc restart then try to create an already existing debugfs directory and log: debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi' Unregister debugfs entries as part of ucsi_unregister(), and clear ucsi->debugfs after freeing it so repeated unregister paths remain safe. | ||||
| CVE-2026-4637 | 1 Paessler | 1 Prtg Network Monitor | 2026-09-25 | N/A |
| Paessler PRTG Network Monitor before version 26.2.120.1449 is affected by a reflected Cross-Site Scripting (XSS) vulnerability. When a request is made for a non-existent resource ending in \".htm\", the web interface returns an HTTP 403 \"Forbidden Path\" error page that echoes the requested URL path into the HTML response body without proper output encoding or sanitization. An unauthenticated, remote attacker can craft a URL containing an HTML/JavaScript payload in the path (e.g. https:////welcome.htm) and, once a victim with an active PRTG session opens the crafted link, execute arbitrary JavaScript in the security context of the PRTG web interface. Because the PRTG session cookie is not protected with the HttpOnly attribute, successful exploitation allows the attacker to read and exfiltrate the victim's session cookie, potentially leading to session hijacking. | ||||
| CVE-2026-81882 | 2 Radare, Radareorg | 2 Radare2, Radare2 | 2026-09-25 | 3.3 Low |
| radare2 is a UNIX-like reverse engineering framework and command-line toolset. Prior to 6.2.0, radare2's binary property-list Unicode parser was vulnerable because the binary-property-list Unicode parser underallocated an uninitialized UTF-8 destination and did not guarantee NUL termination. The vulnerability is triggered by running the explicit pFB or pFBj commands on untrusted binary property-list data. The json encoder treated the converted data as a nul-terminated c string and could continue reading beyond the allocation. This can cause disclosure of uninitialized or adjacent heap contents in JSON output and possible process termination. This issue is fixed in version 6.2.0. | ||||
| CVE-2026-20146 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 5.5 Medium |
| A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system to either read or delete arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files or delete arbitrary files on the affected system. | ||||
| CVE-2026-20147 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 9.9 Critical |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node ISE deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-20148 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 4.9 Medium |
| A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system and read arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system. | ||||
| CVE-2026-20181 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 9.1 Critical |
| A vulnerability in Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored. | ||||
| CVE-2026-20190 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 7.5 High |
| A vulnerability in Cisco ISE and ISE-PIC could allow an unauthenticated, remote attacker to view sensitive information on an affected device. This vulnerability is due to improper authorization checks when a resource is accessed. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to sensitive information, including hashed credentials that could be used in future attacks. | ||||
| CVE-2026-20136 | 1 Cisco | 3 Identity Services Engine, Identity Services Engine Passive Identity Connector, Identity Services Engine Software | 2026-09-25 | 6 Medium |
| A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root. This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system. | ||||
| CVE-2026-98024 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/ism: folio_put() after error dmb->cpu_addr was allocated via folio_alloc(). Use folio_put() instead of kfree() in the error exit of ism_alloc_dmb() to avoid slab allocator corruption. While at it, reset dmb->cpu_addr after folio_put to avoid unintentional UAF by future callers. | ||||
| CVE-2026-98025 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cx82310_eth: drop URB after 0xffff reboot sentinel to prevent partial_data heap overflow The 0xffff length sentinel detects a router reboot and schedules re-enabling of ethernet mode, but then falls through to the rest of the loop body. The next check is } else if (len > CX82310_MTU) { which is the else of the just-matched if -- it never fires for len == 0xffff. The MTU bound that normally caps the incomplete-packet save path is silently bypassed. With 0xffff > skb->len always true (rx_urb_size is 4096), the incomplete-packet branch saves dev->partial_len = skb->len bytes into dev->partial_data. partial_data is kmalloc(hard_mtu) = kmalloc(CX82310_MTU + 2) = 1516 bytes, but skb->len after the 2-byte header pull can be up to 4094. A device that sends a 4096-byte URB starting with [0xff 0xff] therefore copies 4094 device-provided bytes into a buffer allocated for 1516 bytes, exceeding its requested size by 2578 bytes. The next URB then reads dev->partial_len (4094) back from the same 1516-byte buffer and dev->partial_rem (65535 - 4094 = 61441) from the new URB's ~4KB skb, both well past their allocations, and delivers the spliced result as a 64KB "frame" to the network stack. Bail out of rx_fixup after scheduling the re-enable work; the remainder of a reboot-marker URB is not meaningful packet data. This restores the invariant that partial_len < CX82310_MTU + 2 on the save path, since every other route there has already passed the MTU check. | ||||
| CVE-2026-98026 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: mcast: properly convert mglist to rcu Sashiko reported a bug [1] that br_multicast_del_port_group unlists the port group not using proper rcu helper that preserves the next pointer and after that immediately frees the port group without waiting for rcu grace period. The only rcu walker of mglist is br_multicast_list_adjacent() and it turns out that function has always been buggy because mglist was never properly converted to RCU. Fix it by converting it to rcu and moving its initialization after eth_addr's. Initializing p->next can use RCU_INIT_POINTER because we have a barrier from the hlist_add_head_rcu call later, besides we're initializing an unpublished structure anyway. [1] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260826014200.362304-1-littleddfu%40gmail.com | ||||
| CVE-2026-98054 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: Intel: avs: Fix unbalanced module reference count strace_open() invokes try_module_get() which on success takes the module reference. If any follow up operation causes strace_open() to fail, the refcount shall be put down. | ||||
| CVE-2026-98057 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Add checking nr_subbufs to persistent ring buffer validation Sashiko reported that the code was using meta->nr_subbufs without making sure that it matched the nr_pages + 1 on data that was assuming the two were the same. Add a check to the persistent ring buffer validation code to make sure that the saved nr_subbufs matches what we expect. | ||||
| CVE-2026-98059 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark sched_process_wait argument as nullable do_wait() passes wo->wo_pid to the sched_process_wait tracepoint. kernel_wait4() leaves wo_pid NULL for wait4(-1), and kernel_waitid_prepare() does likewise for waitid(P_ALL). btf_ctx_access() currently types argument 0 as PTR_TO_BTF_ID | PTR_TRUSTED. Without PTR_MAYBE_NULL, the verifier accepts an unchecked dereference. Trusted pointer loads have no fault protection, so a wait for any child can then cause a NULL pointer dereference in JITed BPF code. Add sched_process_wait to raw_tp_null_args[] with argument 0 marked nullable. The verifier rejects an unchecked dereference while preserving access after the program checks the pointer for NULL. | ||||
| CVE-2026-98062 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Mark signal tracepoint siginfo arguments as scalar The signal_generate and signal_deliver tracepoints declare their info argument as a struct kernel_siginfo pointer. btf_ctx_access() therefore treats it as a trusted pointer for tp_btf programs. Signal delivery also uses SEND_SIG_NOINFO and SEND_SIG_PRIV as special values for this argument. Those values are zero and one respectively, and are not pointers. A tp_btf program can currently dereference either value and fault the kernel. In particular, signal_generate can run from timer interrupt context, turning the fault into a kernel panic. Record both tracepoints in raw_tp_null_args[] and mark argument one as a non-pointer. This preserves scalar access to the cookie while rejecting direct and helper-mediated pointer use. Merely marking it nullable would not suffice because SEND_SIG_PRIV is nonzero. | ||||
| CVE-2026-98063 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL-ptr-deref in btf_var_show() btf_var_show() calls btf_type_id_resolve() unconditionally, which dereferences btf->resolved_ids. That is NULL for a base BTF - e.g. the vmlinux BTF that bpf_snprintf_btf() renders against - since base BTF is not resolved during parsing. btf_modifier_show() guards this with 'if (btf->resolved_ids)', but btf_var_show() does not. A BPF program that passes the type_id of a BTF_KIND_VAR from the vmlinux BTF to bpf_snprintf_btf() thus NULL-derefs: KASAN: probably user-memory-access in range [0x46638-0x4663f] RIP: 0010:btf_var_show (kernel/bpf/btf.c:2929) Call Trace: <TASK> btf_type_show (kernel/bpf/btf.c:8259) btf_type_snprintf_show (kernel/bpf/btf.c:8329) bpf_snprintf_btf (kernel/trace/bpf_trace.c:1047) bpf_prog_test_run_raw_tp (net/bpf/test_run.c:829) __sys_bpf (kernel/bpf/syscall.c:4804) do_syscall_64 (arch/x86/entry/syscall_64.c:84) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Resolve the var's type directly with btf_type_skip_modifiers() when resolved_ids is NULL, mirroring btf_modifier_show(). | ||||
| CVE-2026-98071 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: clear cp_flags bits individually in rds_conn_path_reset() rds_conn_path_reset() wipes the whole flag word with a plain cp->cp_flags = 0 store. Every other accessor of that word uses atomic bitops, and some of them can run concurrently with the reset: RDS_LL_SEND_FULL is set from rds_send_xmit() and cleared from the transport completion paths, neither of which holds anything that excludes the shutdown worker. A plain store racing an atomic read-modify-write on the same word is a data race, and whichever side loses has its update silently discarded. Clear the two bits the reset is actually responsible for instead. RDS_IN_XMIT and RDS_RECV_REFILL need no store at all here: they belong to the caller, rds_conn_shutdown(), which waits for both to be clear before calling the transport shutdown and this reset. This also gives every bit in cp_flags a single well-defined writer discipline, which the following patches rely on when they turn RDS_IN_XMIT and RDS_RECV_REFILL into bit locks held across the teardown: a blanket store mid-teardown would destroy lock ownership that an atomic clear preserves. Oracle UEK carries the same conversion ("net/rds: Preserve essential connection state flags"), motivated by its asynchronous shutdown state machine, whose progress and destroy flags must survive the reset. UEK's variant also clears RDS_IN_XMIT and RDS_RECV_REFILL because there the reset runs as the final step of a teardown that owns both bits, making those clears its unlock. Upstream that release belongs in rds_conn_shutdown(): once a later patch in this series turns the two bits into locks held across the teardown, ending ownership needs release semantics and a wake-up that a plain clear inside the reset would not provide. Based on Oracle UEK commit "net/rds: Preserve essential connection state flags" by Gerd Rausch. | ||||