Export limit exceeded: 361170 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361170 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53263 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 6lowpan: fix off-by-one in multicast context address compression The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses &data[1] as destination and &ipaddr->s6_addr[11] as source, but both should be offset by one: &data[2] and &ipaddr->s6_addr[12] respectively. This off-by-one has two consequences: 1. data[1] is overwritten with s6_addr[11], corrupting the RIID field in the compressed multicast address 2. data[5] is never written, so uninitialized kernel stack memory is transmitted over the network via lowpan_push_hc_data(), leaking kernel stack contents The correct inline data layout must match what the decompression function lowpan_uncompress_multicast_ctx_daddr() expects: data[0..1] = s6_addr[1..2] (flags/scope + RIID) data[2..5] = s6_addr[12..15] (group ID) Also zero-initialize the data array as a defensive measure against similar bugs in the future. | ||||
| CVE-2026-53265 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: check allocation under invalidate lock commit 2d1f7b65f5de ("dm cache policy smq: fix missing locks in invalidating cache blocks") added mq->lock around the destructive part of smq_invalidate_mapping(), but left the e->allocated check outside the critical section. That leaves a check-then-act race. Two concurrent invalidators can both observe e->allocated as true before either of them takes mq->lock. The first invalidator that acquires the lock removes the entry from the queues and hash table and then calls free_entry(), which clears e->allocated and puts the entry back on the free list. The second invalidator can then acquire mq->lock and continue with the stale result of the unlocked check. This can corrupt the SMQ queues or hash table by deleting an entry that is no longer on those structures. It can also hit the allocation check in free_entry() when the same entry is freed again. Move the allocation check under mq->lock so the predicate and the destructive operations are serialized by the same lock. | ||||
| CVE-2026-53266 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: make ebt_snat ARP rewrite writable The ebtables SNAT target keeps the Ethernet source address rewrite behind skb_ensure_writable(skb, 0). This is intentional: at the bridge ebtables hooks the Ethernet header is addressed through skb_mac_header()/eth_hdr(), while skb->data points at the Ethernet payload. Asking skb_ensure_writable() for ETH_HLEN bytes would check the payload, not the Ethernet header, and would reintroduce the small packet regression fixed by commit 63137bc5882a. However, the optional ARP sender hardware address rewrite is different. It writes through skb_store_bits() at an offset relative to skb->data: skb_store_bits(skb, sizeof(struct arphdr), info->mac, ETH_ALEN) skb_header_pointer() only safely reads the ARP header; it does not make the later sender hardware address range writable. If that range is still held in a nonlinear skb fragment backed by a splice-imported file page, skb_store_bits() maps the frag page and copies the new MAC address directly into it. Ensure the ARP SHA range is writable before reading the ARP header and before calling skb_store_bits(). | ||||
| CVE-2026-53268 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack_irc: fix possible out-of-bounds read When parsing fails after we've matched the command string we should bail out instead of trying to match a different command. This helper should be deprecated, given prevalence of TLS I doubt it has any relevance in 2026. | ||||
| CVE-2026-53271 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix NULL-deref of opinfo->conn in oplock/lease break notifiers smb2_oplock_break_noti() and smb2_lease_break_noti() read opinfo->conn into a local with neither READ_ONCE() nor a NULL check. Both run from oplock_break() after opinfo_get_list() has dropped ci->m_lock, so a concurrent SMB2 LOGOFF (session_fd_check()) can set op->conn = NULL under ci->m_lock within that window. ksmbd_conn_r_count_inc(conn) then writes through NULL at offset 0xc4 -- a remotely triggerable oops. Guard both reads the way compare_guid_key() already does: read opinfo->conn with READ_ONCE() and return early if it is NULL, before allocating the work struct so nothing leaks. A NULL conn means the client is gone and the break is moot, so return 0; oplock_break() treats that as success and runs the normal teardown. | ||||
| CVE-2026-56091 | 2026-06-25 | N/A | ||
| When using Apache Shiro with the shiro-guice module in a web servlet context, a specially crafted HTTP request may cause an authentication bypass. This vulnerability is similar to https://www.cve.org/CVERecord?id=CVE-2020-1957 https://www.cve.org/CVERecord , except that it affects the `shiro-guice` module instead of the `shiro-spring` module. This issue affects all Apache Shiro versions through 2.x, and 3.0.0-alpha-1 only when using `shiro-guice` module in a web servlet context. Upgrade to version 3.0.0 or later, which fixes the issue. | ||||
| CVE-2026-41566 | 2026-06-25 | N/A | ||
| Improper Handling of Insufficient Permissions or Privileges vulnerability in Apache Kvrocks. This issue affects Apache Kvrocks: 2.8.0. Users are recommended to upgrade to version 2.16.0, which fixes the issue. | ||||
| CVE-2026-53141 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Fix global performance monitor reference counting In the SET_GLOBAL ioctl, v3d_perfmon_find() bumps the reference count on the perfmon it returns, but v3d_perfmon_set_global_ioctl() and v3d_perfmon_delete() fail to release that reference on several paths: 1. v3d_perfmon_set_global_ioctl() leaks the reference on its error paths. 2. CLEAR_GLOBAL leaks both the find reference and the reference previously stashed in v3d->global_perfmon by the SET_GLOBAL ioctl that configured it. 3. Destroying a perfmon that is the current global perfmon leaks the reference stashed by the SET_GLOBAL ioctl. Release each of these references explicitly. | ||||
| CVE-2026-53180 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: timers/migration: Fix livelock in tmigr_handle_remote_up() tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu == smp_processor_id(), assuming the local softirq path already handled this CPU's timers. This assumption is wrong because jiffies can advance after the handling of the CPU's global timers in run_timer_base(BASE_GLOBAL) and before tmigr_handle_remote() evaluates the expiry times. As a consequence a timer which expires after the CPU local timer wheel advanced and becomes expired in the remote handling is ignored and the callback is never invoked and removed from the timer wheel. What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it as expired, and the event is re-queued with expires == now on each iteration. The goto-again loop spins indefinitely. Fix this by calling timer_expire_remote() unconditionally. That's minimal overhead for the common case as __run_timer_base() returns immediately if there is nothing to expire in the local wheel. [ tglx: Amend change log and add a comment ] | ||||
| CVE-2026-53181 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: fix sk_ack_backlog leak on failed handshake When vmci_transport_recv_connecting_server() returns an error, vmci_transport_recv_listen() calls vsock_remove_pending() but never calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented permanently. Repeated handshake failures (malformed packets, queue pair alloc failure, event subscribe failure) cause sk_ack_backlog to climb toward sk_max_ack_backlog. Once it reaches the limit the listener permanently refuses all new connections with -ECONNREFUSED, a silent denial of service requiring a process restart to recover. The two existing sk_acceptq_removed() calls in af_vsock.c do not cover this path: line 764 checks vsock_is_pending() which returns false after vsock_remove_pending(), and line 1889 is only reached on successful accept(). Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on the error path. | ||||
| CVE-2026-53190 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait() dma_fence_unwrap_for_each() internally calls dma_fence_unwrap_first() which does cursor->chain = dma_fence_get(head), taking an extra reference. On normal loop completion, dma_fence_unwrap_next() releases this via dma_fence_chain_walk() -> dma_fence_put(). When virtio_gpu_do_fence_wait() fails and the function returns early from inside the loop, the cursor->chain reference is never released. This is the only caller in the entire kernel that does an early return inside dma_fence_unwrap_for_each. Add dma_fence_put(itr.chain) before the early return. | ||||
| CVE-2026-53205 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Add bounds checks for firmware log indices Add validation that read and write indices in the firmware log buffer are within valid bounds (< data_size) before using them. If out-of-bounds indices are encountered (from firmware), clamp them to safe values instead of proceeding with invalid offsets. This prevents potential out-of-bounds buffer access when firmware supplies invalid log indices. | ||||
| CVE-2026-53209 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: reject oversized Broadcast Announcement prepend Existing advertising instances can already hold the maximum extended advertising payload. When hci_adv_bcast_annoucement() prepends the Broadcast Announcement service data to that payload, the combined data may no longer fit in the temporary buffer used to rebuild the advertising data. Reject that case before copying the existing payload and report the failure through the device log. This keeps the existing advertising data intact and avoids overrunning the temporary buffer. | ||||
| CVE-2026-53211 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register NFT_META_BRI_IIFHWADDR declares its destination register with len = ETH_ALEN (6 bytes), which the register-init tracking rounds up to two 32-bit registers (8 bytes). nft_meta_bridge_get_eval() then does memcpy(dest, br_dev->dev_addr, ETH_ALEN), writing only 6 bytes and leaving the upper 2 bytes of the second register as uninitialised nft_do_chain() stack. A downstream load of that register span leaks those stale bytes to userspace. Zero the second register before the memcpy so the full declared span is written. | ||||
| CVE-2026-53216 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: limit XDP frame size to the RX buffer mvpp2 has short and long BM pools, and short pool buffers can be smaller than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with PAGE_SIZE as frame size. XDP helpers use frame_sz to validate tail growth and to derive the hard end of the data area. Advertising PAGE_SIZE for short buffers can let bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting memory or later tripping skb tailroom checks. Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches the actual buffer backing the packet. | ||||
| CVE-2026-53217 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: mvpp2: sync RX data at the hardware packet offset mvpp2 programs the RX queue packet offset, so hardware writes received data at dma_addr + MVPP2_SKB_HEADROOM. The current CPU sync starts at dma_addr and only covers rx_bytes + MVPP2_MH_SIZE bytes, which syncs the unused headroom and misses the same number of bytes at the packet tail. On non-coherent DMA systems this can leave the CPU reading stale cache contents for the end of the received frame. Use dma_sync_single_range_for_cpu() with MVPP2_SKB_HEADROOM as the range offset so the sync covers the Marvell header and packet data actually written by hardware. | ||||
| CVE-2026-53218 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_exthdr: fix register tracking for F_PRESENT flag nft_exthdr_init() passes user-controlled priv->len to nft_parse_register_store(), which marks that many bytes in the register bitmap as initialized. However, when NFT_EXTHDR_F_PRESENT is set, the eval paths write only 1 byte (nft_reg_store8) or 4 bytes (*dest = 0 on TCP/DCCP error path). When len > 4, registers beyond the first are never written, retaining uninitialized stack data from nft_regs. Bail out if userspace requests too much data when F_PRESENT is set. | ||||
| CVE-2026-53227 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix possible kfree_skb of ERR_PTR After the patch in the "Fixes" tag, the allocation of the "reply" skb can happen either before or after locking the ovs_mutex. However, error cleanups still follow the classical reversed order, assuming "reply" is allocated before locking: it is freed after unlocking. If "reply" allocation happens after locking the mutex and it fails, "reply" is left with an ERR_PTR, and execution jumps to the correspondent cleanup stage which will try to free an invalid pointer. Fix this by setting the pointer to NULL after having saved its error value. | ||||
| CVE-2026-53237 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mvebu: fix NULL pointer dereference in suspend/resume mvebu_pwm_suspend() and mvebu_pwm_resume() are called for all GPIO banks during suspend/resume, but not all banks have PWM functionality. GPIO banks without PWM have mvchip->mvpwm set to NULL. Calling mvebu_pwm_suspend() with mvpwm == NULL causes a NULL pointer dereference when it tries to access mvpwm->blink_select. Unable to handle kernel NULL pointer dereference at virtual address 00000020 when write [00000020] *pgd=00000000 Internal error: Oops: 815 [#1] PREEMPT ARM Modules linked in: CPU: 0 UID: 0 PID: 406 Comm: sh Not tainted 6.12.74-rt12-yocto-standard-g4e96f98fb7db-dirty #353 Hardware name: Marvell Armada 370/XP (Device Tree) PC is at regmap_mmio_read+0x38/0x54 LR is at regmap_mmio_read+0x38/0x54 pc : [<c05fd2ac>] lr : [<c05fd2ac>] psr: 200f0013 sp : f0c11d10 ip : 00000000 fp : c100d2f0 r10: c14fb854 r9 : 00000000 r8 : 00000000 r7 : c1799c00 r6 : 00000020 r5 : 00000020 r4 : c179c7c0 r3 : f0a231a0 r2 : 00000020 r1 : 00000020 r0 : 00000000 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 135ec059 DAC: 00000051 Call trace: regmap_mmio_read from _regmap_bus_reg_read+0x78/0xac _regmap_bus_reg_read from _regmap_read+0x60/0x154 _regmap_read from regmap_read+0x3c/0x60 regmap_read from mvebu_gpio_suspend+0xa4/0x14c mvebu_gpio_suspend from dpm_run_callback+0x54/0x180 dpm_run_callback from device_suspend+0x124/0x630 device_suspend from dpm_suspend+0x124/0x270 dpm_suspend from dpm_suspend_start+0x64/0x6c dpm_suspend_start from suspend_devices_and_enter+0x140/0x8e8 suspend_devices_and_enter from pm_suspend+0x2fc/0x308 pm_suspend from state_store+0x6c/0xc8 state_store from kernfs_fop_write_iter+0x10c/0x1f8 kernfs_fop_write_iter from vfs_write+0x270/0x468 vfs_write from ksys_write+0x70/0xf0 ksys_write from ret_fast_syscall+0x0/0x54 Add a NULL check for mvchip->mvpwm before calling the PWM suspend/resume functions. | ||||
| CVE-2026-53243 | 1 Linux | 1 Linux Kernel | 2026-06-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rseq: Fix using an uninitialized stack variable in rseq_exit_user_update() There is an bug in which an uninitialized stack variable is used in rseq_exit_user_update() as reported by syzbot: BUG: KMSAN: kernel-infoleak in rseq_set_ids_get_csaddr include/linux/rseq_entry.h:502 [inline] The local variable: struct rseq_ids ids = { .cpu_id = task_cpu(t), .mm_cid = task_mm_cid(t), .node_id = cpu_to_node(ids.cpu_id), }; According to the C standard, the evaluation order of expressions in an initializer list is indeterminately sequenced. The compiler (Clang, in this KMSAN build) evaluates `cpu_to_node(ids.cpu_id)` *before* `ids.cpu_id` is initialized with `task_cpu(t)`. This is fixed by moving the assignment of ids.node_id outside the structure initialization. | ||||