Export limit exceeded: 50680 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (50680 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93045 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject arena frees below the arena base bpf_arena_free_pages() accepts scalar arena addresses. The runtime masks the address to the low 32 bits and reconstructs a full user address from the arena base before returning the range to the arena free tree. When the scalar value is below the low 32 bits of the arena base, full_uaddr falls below user_vm_start. The existing upper-end clipping then turns this into an out-of-range free-tree offset. A later allocation can reuse that offset and return an address below the arena mapping. Reject such frees before computing the clipped range. | ||||
| CVE-2026-93053 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: speakup: keyhelp: guard letter_offsets possible out-of-range indexing help_init() builds letter_offsets[] by using the first byte of each function name as an index via `(start & 31) - 1`. If function_names are overridden from sysfs (root) with a name starting outside [a–z], the index underflows or exceeds the array, leading to OOB write. Function names can be overridden with the following commands as root: modprobe speakup_soft echo "0 _bad" > /sys/accessibility/speakup/i18n/function_names # then press Insert+2 on /dev/tty This fix checks the first letter in help_init(), and if it is not in the [a–z] range the function returns an error to the caller. Eventually this error is propagated to drivers/accessibility/speakup/main.c:2217, which causes a bleep sound. | ||||
| CVE-2026-93076 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dax/fsdev: clear vmemmap_shift when binding static pgmap Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static device from device_dax (which may set vmemmap_shift based on alignment) to fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly zero it before devm_memremap_pages() so the vmemmap is built for order-0 folios as fsdev requires. | ||||
| CVE-2026-92522 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: validate MADT IOAPIC entry bounds The IOAPIC hotplug lookup parses both MADT and _MAT records directly. The MADT walk previously used a subtable's declared length to advance the cursor after only locating a generic header. The _MAT path likewise passed a generic header to the IOAPIC helper. Validate that a current record has a complete generic header, that its declared length is contained in the available record range, and that a typed IOAPIC record contains the full fixed IOAPIC body before reading its fields. Use the same relation for both MADT and _MAT provider paths. | ||||
| CVE-2026-90413 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: reject login PDUs declaring more data than was received isert_login_recv_done() records how many bytes the HCA actually placed in the login buffer, but nothing compares that against the length the login PDU's BHS declares. isert_rx_login_req() copies min(login_req_len, MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then reads the declared length back out of that buffer - for the first PDU in iscsi_target_locate_portal(), payload_length = ntoh24(login_req->dlength); tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL); and for the ones after it in iscsi_decode_text_input(), reached from iscsi_target_do_login(). login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so an initiator that declares more than it sends reads off the end of it, before authentication and with the length under its control: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167 __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_target_locate_portal+0x48d/0x1180 iscsi_target_login_thread+0x19a9/0x3350 Allocated by task 167: __kmalloc_cache_noprof+0x158/0x370 iscsi_target_login_thread+0x971/0x3350 which belongs to the cache kmalloc-8k of size 8192 allocated 8192-byte region Falsifying the second login PDU instead reaches the other reader, on the same buffer: BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80 Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50 Workqueue: isert_login_wq iscsi_target_do_login_rx __asan_memcpy+0x23/0x60 kmemdup_nul+0x43/0x80 iscsi_decode_text_input+0xc6/0x11c0 iscsi_target_do_login+0x261/0x1470 iscsi_target_do_login_rx+0x51d/0x7d0 iscsit over TCP is not exposed: iscsit_get_login_rx() validates the declared length with iscsi_target_check_login_request() and then reads exactly that many bytes off the socket, so the declared length governs how much arrives rather than how much is copied out of an already-filled buffer. isert does not call iscsi_target_check_login_request() at all. Reject a login PDU whose declared DataSegmentLength exceeds what was received, in both paths that reach isert_rx_login_req(): isert_get_login_rx() for the first login PDU and isert_login_recv_done() for the ones after it. dlength <= login_req_len is allowed because the received count can include up to three bytes of iSCSI padding. Once the check is in place the copy out can no longer exceed the copy in: the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is login_req_len. Like the existing short-PDU check added by 29e7b925ae6d, the reject in isert_login_recv_done() returns without completing login_req_comp, so a malformed subsequent PDU leaves the login to be torn down by the login timer rather than failing immediately. The first-PDU path returns an error and fails straight away. Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an initiator that sends the real key=value payload while declaring 8193 in the BHS, on the first login PDU and on the second in separate runs. The reported read size tracks the declared value exactly; 16384 and 61440 behave the same. Unpatched 3 of 3 runs report on each of the two paths, patched 0 of 3 on both, run alternately in a single session, and a normal login still completes on the patched build. | ||||
| CVE-2026-92478 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate connected lane counts The connected lane count is used by TX equalization code to index arrays sized by UFS_MAX_LANES. Reject zero and out-of-range RX or TX lane counts before they can be propagated. | ||||
| CVE-2026-92480 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread. | ||||
| CVE-2026-93741 | 1 Totolink | 1 A3002mu | 2026-09-19 | 10 Critical |
| A security flaw has been discovered in Totolink A3002MU Hh-B20211125.1046. Affected by this vulnerability is the function formWlWds of the file /boafrm/formWlWds. The manipulation of the argument submit-url results in buffer overflow. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-90370 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound TLV walk in mt7996_mcu_get_chip_config The response TLV loop advanced by tlv->len without a minimum, so a theoretical firmware response containing a zero-length TLV could spin forever, hanging the CPU during device probe. The u32 payload was also read without bounds checking. Reject a short fixed field, stop on a TLV whose length underruns the header or overruns the skb. | ||||
| CVE-2026-90386 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: dw: avoid shift-out-of-bounds when DAA assigns no devices On an empty bus ENTDAA assigns nothing, so cmd->rx_len (the count of addresses left unassigned) equals master->maxdevs. The GENMASK() index master->maxdevs - cmd->rx_len - 1 then becomes -1, which trips up UBSAN. This happens every time on boot on a Gigabyte/AMD server: UBSAN: shift-out-of-bounds in drivers/i3c/master/dw-i3c-master.c:905:12 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 7 UID: 0 PID: 963 Comm: (udev-worker) Not tainted 7.0.11-200.fc44.x86_64 #1 PREEMPT(lazy) Hardware name: Giga Computing E163-Z34-AAH1-000/MZ33-DC1-000, BIOS R32_F45 04/01/2026 Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ubsan_epilogue+0x5/0x2b __ubsan_handle_shift_out_of_bounds.cold+0xd7/0x1ab dw_i3c_master_daa.cold+0x1b/0x96 [dw_i3c_master] i3c_master_do_daa_ext.part.0+0x3e/0xf0 [i3c] Skip the mask when no new device was assigned. | ||||
| CVE-2026-90314 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry() table->offset[i] is a u32 from firmware, but was stored into a signed int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes before the table buffer. The subsequent avail check was bypassed because the negative int was promoted to a large size_t in the expression "table_sz - offset - sizeof(*hdr)", yielding a large positive avail and letting the out-of-bounds hdr->type read proceed undetected. Store the offset as u32 and validate it with unsigned comparisons before any pointer arithmetic. | ||||
| CVE-2026-90322 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 by stopping o2net and setting cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set. That stale state makes o2nm_this_node() return 255, blocks a later local=1 attempt with -EBUSY, and can feed 255 to heartbeat users that call o2nm_this_node() dynamically. Clearing cl_has_local is required when the local node is reset. But heartbeat threads can still be running at that point. They pin the local node config item at startup, yet o2hb_do_disk_heartbeat() and thread teardown re-read o2nm_this_node() for the local slot and for o2nm_undepend_this_node(). Once local=0 has cleared the live local-node state, those dynamic reads return O2NM_MAX_NODES, which is also the invalid node number 255. Store the local node number in the heartbeat region when the region starts. Use that stable node for heartbeat slot writes/checks, negotiation messages, and the final configfs undepend. Stop the heartbeat loop when the current local node no longer matches the stored node, and clear cl_has_local together with cl_local_node in the local=0 path so nodemanager state matches node removal. Validation reproduced this kernel report: KASAN slab-out-of-bounds in o2hb_do_disk_heartbeat+0x372/0xb30 RIP: 0010:memset+0xf/0x20 Read of size 8 Call trace: dump_stack_lvl+0x66/0xa0 print_report+0xd0/0x630 o2hb_do_disk_heartbeat+0x372/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x188/0x2f0 kasan_report+0xe4/0x120 o2hb_do_disk_heartbeat+0x5/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079) o2hb_thread+0x14e/0x770 kthread_affine_node+0x139/0x180 lockdep_hardirqs_on_prepare+0xda/0x190 trace_hardirqs_on+0x18/0x130 kthread+0x19d/0x1e0 ret_from_fork+0x37a/0x4d0 __switch_to+0x2d5/0x6f0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-90331 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: asus: refactor the two workqueues and init sequence Multiple issues have been found within the hid-asus driver: - unchecked size in asus_raw_event() - unclean teardown of asus_probe on failure - possible use-after-free in asus_probe - multiple workqueue used for jobs where one was enough - sleeping calls in atomic context - packets of incorrect size being sent to the keyboard controller Join the two workqueues into one reusing the stopping mechanism of the brightness workqueue, use the joined workqueue to also move the asus_wmi_send_event() sleeping call away from atomic context and add a size check in asus_raw_event(). | ||||
| CVE-2026-90348 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath10k: snoc: use memcpy_fromio() for MSA ramdump On WCN3990/SNOC the MSA region is mapped with devm_memremap(MEMREMAP_WT). On arm64 such a mapping is not Normal-cacheable, so unaligned accesses to it are not permitted. ath10k_msa_dump_memory() copies the region with a plain memcpy(), whose optimized __pi_memcpy_generic implementation issues wide/unaligned loads. This triggers an alignment fault (FSC=0x21) Oops in ath10k_snoc_fw_crashed_dump() while collecting the devcoredump: Unable to handle kernel paging request ... FSC=0x21: alignment fault pc : __pi_memcpy_generic lr : ath10k_snoc_fw_crashed_dump [ath10k_snoc] The Oops both leaves the firmware RAM dump buffer zeroed (no dump is captured) and crashes the kernel, which in turn breaks modem SSR recovery. Use memcpy_fromio(), which only performs accesses that are valid for such a device-memory mapping. The generic memcpy_fromio() implementation aligns the source before issuing word-sized reads and stores the destination with put_unaligned(), so it is also safe for the coherent DMA allocation used on the non-reserved-memory path. ath11k and ath12k use the same pattern when copying target memory into crash dumps, so call it unconditionally here too. The MEMREMAP_WT pointer is a plain void *, so an explicit __iomem cast is needed; use __force to keep sparse happy. Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.3.7.c5-00107-QCAHLSWMTPL-1 | ||||
| CVE-2026-90350 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: reject out-of-range link ids in mt76_vif_link() mt76_vif_link() indexes mvif->link[] without validating link_id, but callers pass mvif->deflink_id / msta->deflink_id, which hold IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added. Since IEEE80211_MLD_MAX_NUM_LINKS is 15, that reads one element past the end of the array, aliasing mt76_vif_data.offchannel_link. Reachable via mt7996_set_tsf()/mt7996_offset_tsf() and mt7996_net_fill_forward_path(). Bounds check link_id and return NULL, matching mt7996_sta_link() and mt7996_sta_link_protected(). | ||||
| CVE-2026-90259 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data() In that function, we round down the start position and round up the ending position. But during the calculation of @len, we use "round_up(start + len, sectorsize)", which is the rounded up end position, not the rounded up length. Which results a much larger length, and later we are still using "start + len", which is completely incorrect. Fix it by declaring a local @aligned_start and @aligned_len and use them instead. | ||||
| CVE-2026-90358 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, x86: Fix trampoline stack size for 128-bit arguments btf_distill_func_proto() accepts a function argument up to 16 bytes, so a 128-bit scalar such as __int128 reaches the x86 trampoline with arg_size == 16. But the current implementation assumes an __int128 argument only needs one register, so the register save area is under-allocated and save_args() overwrites adjacent stack slots. Compute the register count from arg_size for all arguments to fix it. | ||||
| CVE-2026-90289 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Resize MST HDCP per-connector arrays to 32 AMDGPU_DM_MAX_DISPLAY_INDEX is 31. It suggest a maximum number of 32 connectors. But the way it's used is like MAX_DISPLAY_COUNT. Hence we're off by one with DRM core, which supports a max of 32 connectors. Rename AMDGPU_DM_MAX_DISPLAY_INDEX to AMDGPU_DM_MAX_DISPLAY_COUNT to match its actual use, and increase the size to 32 to match the originally intended size. | ||||
| CVE-2026-90230 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix heap out-of-bounds read in nvmet_auth_negotiate() nvmet_execute_auth_send() allocates the DH-HMAC-CHAP message buffer with the host-supplied transfer length (tl) and hands it to nvmet_auth_negotiate() without passing tl along. nvmet_auth_negotiate() then reads the negotiate header and, for each of the halen hash identifiers and dhlen DH group identifiers, indexes into the fixed idlist[60] array (hashes at idlist[0..halen), groups at idlist[30..]). Neither the transfer length nor halen/dhlen is validated. A malicious or non-conformant host can report a tl smaller than the negotiate structure, or a halen/dhlen larger than the array (both are u8, up to 255), making the loops read past the end of the allocated buffer (heap out-of-bounds read). The sibling nvmet_auth_reply() already validates tl against the structure size; the negotiate path did not. Pass tl into nvmet_auth_negotiate(), reject a tl that does not cover the negotiate data plus one full protocol descriptor, and reject halen/dhlen larger than NVME_AUTH_DHCHAP_MAX_DH_IDS. | ||||
| CVE-2026-90246 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix integer overflow in verify_tags() bounds check verify_tags() validates the tagset table unpacked from a policy blob. For each set it reads a count and checks that advancing the index by that count stays inside sets.table[]: u32 cnt = tags->sets.table[i]; if (i+cnt >= tags->sets.size) { i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32. sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so every entry is a raw unbounded 32-bit word taken from the policy blob, and verify_tags() is the function that is supposed to validate it. A count close to U32_MAX makes the sum wrap to a small value, the guard passes, and the inner loop then walks sets.table[++i] past the end of the kcalloc(size, sizeof(u32)) allocation. Note that sets.size is bounded by 65535, because unpack_tagsets() reads it with aa_unpack_array() as a u16, so the wrap cannot be reached by growing the table; it is reached purely through the attacker-supplied count. With sets.size = 2 and sets.table = { 0, 0xffffffff }: i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is false, so the guard is bypassed and the inner loop reads sets.table[2] -- one element past a two element allocation The walk continues until an out-of-bounds value happens to be >= hdrs.size or the access faults, so a crafted policy yields an out-of-bounds read on the policy load path (aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags -> verify_tags). unpack_tags() runs before the perms and DFA tables are unpacked, so no other table needs to be well formed to reach it. Policy load is gated by aa_may_manage_policy(), which checks CAP_MAC_ADMIN relative to the subject's own user namespace rather than the init user namespace, so with the default unprivileged_userns_apparmor_policy=1 the path is reachable from an unprivileged task in a matched-level nested namespace, not only by a globally privileged one. Perform the addition in u64 so that it cannot wrap, restoring the intended i + cnt < sets.size guarantee. | ||||