Export limit exceeded: 361169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 361169 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361169 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52996 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix durable fd leak on ClientGUID mismatch in durable v2 open ksmbd_lookup_fd_cguid() returns a ksmbd_file with its refcount incremented via ksmbd_fp_get(). parse_durable_handle_context() in the DURABLE_REQ_V2 case properly releases this reference on every path inside the ClientGUID-match branch, either by calling ksmbd_put_durable_fd() or by transferring ownership to dh_info->fp for a successful reconnect. However, when an entry exists in the global file table with the same CreateGuid but a different ClientGUID, the code simply falls through to the new-open path without dropping the reference obtained from ksmbd_lookup_fd_cguid(). Per MS-SMB2 section 3.3.5.9.10 ("Handling the SMB2_CREATE_DURABLE_HANDLE_REQUEST_V2 Create Context"), the server MUST locate an Open whose Open.CreateGuid matches the request's CreateGuid AND whose Open.ClientGuid matches the ClientGuid of the connection that received the request. If no such Open is found, the server MUST continue with the normal open execution phase. A CreateGuid hit with a ClientGUID mismatch is therefore the "Open not found" case: proceeding with a new open is correct, but the reference obtained purely as a side effect of the lookup must not be leaked. Repeated requests that hit this mismatch pin global_ft entries, prevent __ksmbd_close_fd() from ever running for the corresponding files, and defeat the durable scavenger, leading to long-lived resource leaks. Release the reference in the mismatch path and clear dh_info->fp so subsequent logic does not mistake a non-matching lookup result for a reconnect target. | ||||
| CVE-2026-52998 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check. | ||||
| CVE-2025-8106 | 2026-06-24 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-53022 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-wmi-sysman: bound enumeration string aggregation populate_enum_data() aggregates firmware-provided value-modifier and possible-value strings into fixed 512-byte struct members. The current code bounds each individual source string but then appends every string and separator with raw strcat() and no remaining-space check. Switch the aggregation loops to a bounded append helper and reject enumeration packages whose combined strings do not fit in the destination buffers. [ij: add include] | ||||
| CVE-2026-53063 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix write hang in passthrough mode The invalidate_remove() function has incomplete logic for handling write hit bios after cache invalidation. It sets up the remapping for the overwrite_bio but then drops it immediately without submission, causing write operations to hang. Fix by adding a new invalidate_committed() continuation that submits the remapped writes to the cache origin after metadata commit completes, while using the overwrite_endio hook to ensure proper completion sequencing. This maintains existing coherency. Also improve error handling in invalidate_complete() to preserve the original error status instead of using bio_io_error() unconditionally. | ||||
| CVE-2026-53077 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/rds: Restrict use of RDS/IB to the initial network namespace Prevent using RDS/IB in network namespaces other than the initial one. The existing RDS/IB code will not work properly in non-initial network namespaces. | ||||
| CVE-2026-23879 | 2026-06-24 | 8 High | ||
| py7zr is a Python-based library and utility to support 7zip archive compression, decompression, encryption and decryption. Versions 1.1.2 and below contain an an arbitrary file write vulnerability, which allows symbolic links to be recreated outside the destination directory via crafted malicious symbolic link chains. When using extractall to extract an archive, the library restores these symbolic links, linking them to arbitrary directories on the host file system. During extraction, the program only checks the link arcname within the destination directory, but ignores the combined symlink path resolution. Attackers can exploit this vulnerability by constructing malicious archives, thereby bypassing the directory boundary restrictions implemented by the extractor. Subsequent extraction of regular files through these symbolic links can result in arbitrary file writes. This vulnerability may lead to remote code execution, privilege escalation, data corruption, or denial of service. This issue has been fixed in version 1.1.3. | ||||
| CVE-2026-53008 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix race condition in TX timestamp ring cleanup Fix a race condition between ice_free_tx_tstamp_ring() and ice_tx_map() that can cause a NULL pointer dereference. ice_free_tx_tstamp_ring currently clears the ICE_TX_FLAGS_TXTIME flag after NULLing the tstamp_ring. This could allow a concurrent ice_tx_map call on another CPU to dereference the tstamp_ring, which could lead to a NULL pointer dereference. CPU A:ice_free_tx_tstamp_ring() | CPU B:ice_tx_map() --------------------------------|--------------------------------- tx_ring->tstamp_ring = NULL | | ice_is_txtime_cfg() -> true | tstamp_ring = tx_ring->tstamp_ring | tstamp_ring->count // NULL deref! flags &= ~ICE_TX_FLAGS_TXTIME | Fix by: 1. Reordering ice_free_tx_tstamp_ring() to clear the flag before NULLing the pointer, with smp_wmb() to ensure proper ordering. 2. Adding smp_rmb() in ice_tx_map() after the flag check to order the flag read before the pointer read, using READ_ONCE() for the pointer, and adding a NULL check as a safety net. 3. Converting tx_ring->flags from u8 to DECLARE_BITMAP() and using atomic bitops (set_bit(), clear_bit(), test_bit()) for all flag operations throughout the driver: - ICE_TX_RING_FLAGS_XDP - ICE_TX_RING_FLAGS_VLAN_L2TAG1 - ICE_TX_RING_FLAGS_VLAN_L2TAG2 - ICE_TX_RING_FLAGS_TXTIME | ||||
| CVE-2026-9779 | 2026-06-24 | N/A | ||
| ATEN Unizon doCryptoHugeFileToFile Improper Verification of Cryptographic Signature Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of ATEN Unizon. Authentication is required to exploit this vulnerability. The specific flaw exists within the updateWar method. The issue results from an incorrect implementation of cryptographic signature verification. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-28590. | ||||
| CVE-2026-53765 | 2026-06-24 | 6.1 Medium | ||
| Chrome DevTools for agents (chrome-devtools-mcp) lets your coding agent control and inspect a live Chrome browser. From 0.20.0 until 1.1.0, The chrome-devtools-mcp daemon writes its PID file with fs.writeFileSync() to a deterministic runtime path. On typical macOS environments, and on Linux sessions where $XDG_RUNTIME_DIR is unset, that runtime path falls back to /tmp/chrome-devtools-mcp-<uid>/daemon.pid. Because the write does not use O_NOFOLLOW, a local low-privilege user on the same POSIX host can pre-create /tmp/chrome-devtools-mcp-<victim_uid>/daemon.pid as a symlink to a file writable by the victim. When the victim later starts daemon mode, fs.writeFileSync() follows the symlink and truncates the target file to the daemon PID string. This vulnerability is fixed in 1.1.0. | ||||
| CVE-2026-57288 | 1 Jenkins Project | 1 Jenkins Active Directory Plugin | 2026-06-24 | 3.7 Low |
| Jenkins Active Directory Plugin 2.41.1 and earlier does not escape the user name before building the LDAP search filter in the Windows native (ADSI) authentication path, allowing unauthenticated attackers to inject LDAP wildcard characters to enumerate directory entries and to authenticate as a matching user whose password they know without knowing their exact user name. | ||||
| CVE-2026-57303 | 1 Jenkins Project | 1 Jenkins Assembla Plugin | 2026-06-24 | 7.1 High |
| Jenkins Assembla Plugin 1.4 and earlier does not configure its XML parser to prevent XML external entity (XXE) attacks, allowing attackers able to control the responses of the configured Assembla server to extract secrets from the Jenkins controller or perform server-side request forgery. | ||||
| CVE-2026-52972 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000. | ||||
| CVE-2026-53069 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master syzkaller reported a kernel panic in bond_rr_gen_slave_id() reached via xdp_master_redirect(). Full decoded trace: https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73 bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU counter that bonding only allocates in bond_open() when the mode is round-robin. If the bond device was never brought up, rr_tx_counter stays NULL. The XDP redirect path can still reach that code on a bond that was never opened: bpf_master_redirect_enabled_key is a global static key, so as soon as any bond device has native XDP attached, the XDP_TX -> xdp_master_redirect() interception is enabled for every slave system-wide. The path xdp_master_redirect() -> bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() -> bond_rr_gen_slave_id() then runs against a bond that has no rr_tx_counter and crashes. Fix this in the generic xdp_master_redirect() by refusing to call into the master's ->ndo_xdp_get_xmit_slave() when the master device is not up. IFF_UP is only set after ->ndo_open() has successfully returned, so this reliably excludes masters whose XDP state has not been fully initialized. Drop the frame with XDP_ABORTED so the exception is visible via trace_xdp_exception() rather than silently falling through. This is not specific to bonding: any current or future master that defers XDP state allocation to ->ndo_open() is protected. | ||||
| CVE-2026-52973 | 1 Linux | 1 Linux Kernel | 2026-06-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: futex: Drop CLONE_THREAD requirement for private default hash alloc Currently need_futex_hash_allocate_default() depends on strict pthread semantics, abusing CLONE_THREAD. This breaks the non-concurrency assumptions when doing the mm->futex_ref pcpu allocations, leading to bugs[0] when sharing the mm in other ways; ie: BUG: KASAN: slab-use-after-free in futex_hash_put ... where the +1 bias can end up on a percpu counter that mm->futex_ref no longer points at. Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding vfork keeps the existing paths untouched (no overhead), and we can't race in the first place: either the parent is suspended and the child runs alone, or mm->futex_ref is already allocated from an earlier CLONE_VM. | ||||
| CVE-2026-47110 | 2026-06-24 | 6.5 Medium | ||
| Tiptap for PHP before version 2.1.1 contains an input validation vulnerability that allows authenticated attackers to cause a denial of service by submitting Tiptap JSON with the attrs.href field set to an array instead of a string, causing an unhandled TypeError in the Link::isAllowedUri() function when passed to preg_match(). Attackers can persist malformed JSON records that permanently crash the server-side HTML rendering pipeline for all subsequent viewers of that record until the database entry is manually repaired. | ||||
| CVE-2026-53042 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fwctl: Fix class init ordering to avoid NULL pointer dereference on device removal CXL is linked before fwctl in drivers/Makefile. Both use `module_init, so `cxl_pci_driver_init()` runs first. When `cxl_pci_probe()` calls `fwctl_register()` and then `device_add()`, fwctl_class is not yet registered because fwctl_init() hasn't run, causing `class_to_subsys()` to return NULL and skip knode_class initialization. On device removal, `class_to_subsys()` returns non-NULL, and `device_del()` calls `klist_del()` on the uninitialized knode, triggering a NULL pointer dereference. | ||||
| CVE-2026-53092 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case. | ||||
| CVE-2026-53101 | 1 Linux | 1 Linux Kernel | 2026-06-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: fix potential deadlock in mt7921_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() -> mt7921_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership. | ||||