Export limit exceeded: 24353 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24353 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90224 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: fix double completion race in nci_data_exchange_complete nci_close_device() and nci_rx_work can both call nci_data_exchange_complete() concurrently. After commit 4527025d440ce8 ("nfc: nci: fix circular locking dependency in nci_close_device") moved flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock), rx_work is no longer serialized with the explicit completion call in the close path. Both callers read the non-NULL callback pointer and invoke rawsock_data_exchange_complete(), which calls sock_put() -- but only one sock_hold() was taken, so the second sock_put() underflows the refcount and frees the socket while it is still in use. Replace the bare clear_bit(NCI_DATA_EXCHANGE) with test_and_clear_bit() so that only the first caller proceeds to invoke the callback. | ||||
| CVE-2026-90226 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: avoid userspace overflow on invalid optlen nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so the kernel always stores 4 bytes regardless of the caller-supplied optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length reported back to userspace; it does not constrain the store. A call with optlen < 4 therefore writes past the user buffer, violating the getsockopt(2) contract for all five supported optnames. Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a plain size comparison would promote a negative optlen to size_t and slip past the check; an explicit 'len < 0' test is added first to catch negative values before the size compare. | ||||
| CVE-2026-90232 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: amt: Don't support cross-netns setup. When a lower device is unregistered, amt_device_event() tries to unregister its upper AMT device, but it has two problems. 1. amt_lookup_upper_dev() looks up an upper device in the lower device's netns only 2. amt_device_event() unregisters a single upper device only If AMT device is created on a lower device in another netns, removing the lower device triggers the splat below and gets stuck until all upper devices are removed. [0] The cross-netns setup seems unintentional considering 1. and the following points: * amt_link_setup() sets dev->netns_immutable to true * skb_scrub_packet() is not called in the fast path * iproute2 binary fails to find cross-netns lower device via link-netns: # ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1 Cannot find device "veth1" Instead of supporting it properly and preparing for per-netns netdev unreg, let's forbid cross-netns setup. Note that the problem 2. needs a separate fix. [0]: WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031 Modules linked in: CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518) Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f RSP: 0018:ffffc90004abf160 EFLAGS: 00010212 RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880 RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10 R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08 R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000 FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0 Call Trace: <TASK> rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674) rtnetlink_rcv_msg (net/core/rtnetlink.c:7112) netlink_rcv_skb (net/netlink/af_netlink.c:2556) netlink_unicast (net/netlink/af_netlink.c:1319) netlink_sendmsg (net/netlink/af_netlink.c:1900) ____sys_sendmsg (net/socket.c:775) __sys_sendmsg (net/socket.c:2738) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... unregister_netdevice: waiting for veth0 to become free. Usage count = 7 ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at __netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791) __netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963) netdev_upper_dev_link (net/core/dev.c:9009) amt_newlink (drivers/net/amt.c:3321) | ||||
| CVE-2026-90376 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP Problem: MCU command timeout while the firmware state is normal, and the firmware keeps showing the error log "ERROR!! NO PAUSE...". Root cause: If the MLD_ID field in the TXD is neither the primary link id nor the secondary link id, it may lead to a firmware busy loop when the third link is in power saving mode. Remap frames directed to a third link to the primary link wcid. Since TX status events and txfree completions carry the wcid the firmware saw, use the remapped wcid for packet id tracking and non-AQL packet accounting as well, while the frame keeps its original link context for addressing, band and OMAC selection. | ||||
| CVE-2026-90381 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: fix handling channel context with different bands in mt76_switch_vif_chanctx() When performing channel switches on different radios within a short timeframe, channel contexts with different bands can be carried for each struct ieee80211_vif_chanctx_switch. Rework mt76_switch_vif_chanctx() to properly handle this scenario. | ||||
| CVE-2026-90399 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix stride mismatch in mac_phy_caps_parse() Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the mac_phy_caps buffer as tot_phy_id * len, where len is clamped to min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The subsequent memcpy() destination advances by sizeof(full struct) per slot via C pointer arithmetic, not by the clamped len. When firmware sends short TLVs, the second and later slots are written past the end of the allocation. The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the buffer with full-struct pointer arithmetic, so the allocation must match that stride. Fix by using kzalloc_objs(), which derives the element size from the pointer type, making allocation size and pointer stride provably consistent regardless of what len the firmware provides. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90242 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix iopf_refcount leak on RID domain replacement intel_iommu_attach_device() enables IOPF for the new domain but never disables it for the old one. device_block_translation(), called at the start of the function, tears down translation but does not touch any IOPF state; blocking_domain_attach_dev() has to call iopf_for_domain_remove() explicitly before invoking it for exactly this reason. identity_domain_attach_dev() has the same problem. Its comment claims that no PRI handling is needed because the device has been put in the blocking state, but the blocking state and the IOPF reference count are independent of each other. As a result, replacing a domain that has an iopf_handler with another domain at RID level leaks a reference in info->iopf_refcount. The count never drops back to zero, so iopf_queue_remove_device() is never called and iommu_disable_pci_pri() triggers its WARN_ON(info->iopf_refcount) when the device is released. The PASID paths already handle this correctly by way of iopf_for_domain_replace(); convert the two RID paths to do the same. Using the replace helper rather than a bare remove keeps the enable before the disable, so the reference count does not transiently reach zero and evict the device from the IOPF queue. | ||||
| CVE-2026-90244 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/dma: Restore locking around msi_page_list Unlike a group's default domain, which is always freshly allocated and privately owned (iommu_group_alloc_default_domain()), VFIO type1's legacy container merges any newly attached group into an existing domain whenever their iommu_ops and cache-coherency enforcement match. iommu_dma_get_msi_page() only asserts the caller's own group mutex is held (iommu_group_mutex_assert()). On an IOMMU that publishes IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned through the legacy container can have their guest drivers probe and allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands on a different device fd and group mutex, but both devices' domains are the same merged domain, so both can enter iommu_dma_get_msi_page() concurrently and corrupt msi_page_list. commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a generic operation") dropped the prior msi_prepare_lock on the reasoning that "each iommu_domain is unique to a group," which holds for default domains but not this VFIO type1 case. Restore the static lock, since it's only guarding a corner case and will likely never be contended. iommufd avoids the equivalent problem by having its own callers (iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever reaching the shared list. VFIO type1 can't mirror that since it dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. | ||||
| CVE-2026-90245 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: kyro: Validate overlay viewport coordinates The overlay viewport end coordinates are computed from the viewport origin and dimensions using 32-bit unsigned arithmetic. Large input values can cause these calculations to wrap around before the resulting coordinates are passed to SetOverlayViewPort(). SetOverlayViewPort() packs the viewport coordinates into 16-bit register fields. The X coordinates are additionally adjusted by +2 and +1 before being written. Validate the coordinate calculations for 32-bit wraparound and ensure that the adjusted coordinates fit within their 16-bit register fields before calling SetOverlayViewPort(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2026-90248 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_api: fix teardown of an adopted proto on insert-race loss In tc_new_tfilter() the create branch sets tp_created = 1 before calling tcf_chain_tp_insert_unique(). When the caller loses the race (another request inserted a proto at the same chain/prio first), insert_unique() destroys the caller's own tp_new and returns the winner's proto with an extra reference. tp_created was never cleared, so the loser's errout path treated the winner's live proto as its own and called tcf_chain_tp_delete_empty() on it, silently unlinking an active classifier that the winning request already advertised via RTM_NEWTFILTER. Track the outcome of the insert step in a single tri-state variable so each errout path reacts correctly: - TP_NOT_CREATED: no proto created; pursue the old path. - TP_CREATED: proto inserted successfully; same code path as before. - TP_NOT_OWNED: New - lost the insert race; tp is another request's proto (chain ref already released by tp_new's destroy) Both errout reactions are single expressions derived from the state. This fix is motivated by the Sashiko's automated review of Patch (net/sched: cls_api: Always acquire rtnl_lock when destroying locked classifiers) [1][2]. The review identified the silent-unlink behaviour of an adopted proto's teardown when a request loses the tcf_chain_tp_insert_unique() race. [1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com [2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com | ||||
| CVE-2026-90249 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes The IIO core does not filter duplicate writes to the event enable attribute, so writing the same value twice invokes write_event_config() twice. Enabling twice leaks a runtime PM reference, preventing the device from ever suspending again; disabling twice underflows the usage count and triggers a "Runtime PM usage count underflow" warning. Bail out early when the requested state matches the current state. While at it, switch to pm_runtime_resume_and_get() so a failed resume is propagated to userspace instead of silently marking the event enabled. | ||||
| CVE-2026-90268 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: sd: Fix error handling in sd_probe() after large pool creation failure After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create() failure must unregister disk_dev and let scsi_disk_release() free sdkp. Going through out_free_index kfree()s an already registered device and leaks the sysfs entry. | ||||
| CVE-2026-90305 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard IRQ context. On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping sighand->siglock: BUG: sleeping function called from invalid context at spinlock_rt.c:48 rt_spin_lock from lock_task_sighand lock_task_sighand from run_posix_cpu_timers run_posix_cpu_timers from update_process_times ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M. ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove 32bit KVM host support"), so the select need not be conditional on KVM. Select it to defer POSIX CPU timer expiry to task context. Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers created with timer_create(). | ||||
| CVE-2026-90307 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes nothing to srp_process_cred_req() and srp_process_aer_req(), which read fixed-size fields from the receive buffer without checking that those fields were received. The buffer size is max_ti_iu_len, which comes from the login response and is not validated. A target that advertises 8 and then sends an 8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent back, so those bytes reach the target. SRP_AER_REQ behaves the same way and also reads req->lun. The leak is 8 bytes per response. max_ti_iu_len also decides which slab cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and the read is entirely outside it: BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0 Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50 which belongs to the cache kmalloc-8 of size 8 The buggy address is located 0 bytes to the right of allocated 8-byte region [ffff888104714da0, ffff888104714da8) Without KASAN the returned bytes are whatever is next in the slab. One run returned ".strtab". rsp->data[3] in srp_process_rsp() has the same problem: only resp_data_len is checked before it is read. Drop a request that is shorter than the structure being parsed, and check byte_len before the tsk_mgmt read. | ||||
| CVE-2026-90317 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Invalidate RCU pointers after final spin unlock In a sleepable BPF program, a spin lock can provide the only RCU protection for a kptr. The final bpf_spin_unlock() ends that protection, but the verifier leaves the pointer valid. Another CPU can then free the object before the pointer is used. A capability-limited runtime PoC triggered a task_struct use-after-free in __bpf_get_task_stack(). Record whether the program is in an RCU-protected context before releasing the lock. Invalidate RCU-protected pointers only when the unlock leaves the final such context. This preserves valid pointers in non-sleepable programs and inside an explicit RCU read-side section. | ||||
| CVE-2026-90320 | 1 Linux | 1 Linux Kernel | 2026-09-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first bucket block while checking name/value offsets against the bucket block they target. Reject corrupted external xattr metadata before listxattr() or getxattr() can walk out-of-range entry arrays or name/value offsets. Validation reproduced this kernel report: BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190 Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630 Call Trace: dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 kasan_report+0xe0/0x110 ocfs2_xattr_list_entries+0xd7/0x190 ocfs2_listxattr+0x3f6/0x610 listxattr+0x90/0xe0 path_listxattrat+0xed/0x220 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-90323 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ublk: validate auto buf reg before taking uring_cmd With UBLK_F_AUTO_BUF_REG, invalid sqe->addr can fail after ublk_fill_io_cmd() has set UBLK_IO_FLAG_ACTIVE. The uring_cmd is completed while the tag stays active, which can hang teardown. Split validation from buffer apply so the check has no side effects, then take the uring_cmd and store the already-validated buffer. Apply the same order in FETCH so io->buf is not written before __ublk_fetch() state checks. | ||||
| CVE-2026-90266 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: don't force read-only on transient -EAGAIN from reloc merge On a zoned FS, btrfs_delayed_refs_rsv_refill() returns -EAGAIN whenever the over-committed metadata plus the zone_unusable bytes exceeds the usable size in a metadata block-group to avoid heavy over-commit of metadata and early ENOSPC in one transaction. If this happens while doing reclaim, the transaction is getting aborted. Treat -EAGAIN as a soft, retryable condition in case of block-group reclaim. | ||||
| CVE-2026-90273 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: coresight: etm4x: missing cscfg_csdev_disable_active_config() in perf enable In the perf enable path, there are missing cases where cscfg_csdev_disable_active_config() is not called: - Branch broadcast is selected but not supported by the hardware - etm4_enable_hw() fails This can lead to a leak of config_desc->active_cnt. Fix this by properly calling cscfg_csdev_disable_active_config() in these error paths. | ||||