Export limit exceeded: 361149 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (361149 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-52986 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <qguanni@gmail.com>. | ||||
| CVE-2026-52993 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations. | ||||
| CVE-2026-52994 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vsock/virtio: fix MSG_ZEROCOPY pinned-pages accounting virtio_transport_init_zcopy_skb() uses iter->count as the size argument for msg_zerocopy_realloc(), which in turn passes it to mm_account_pinned_pages() for RLIMIT_MEMLOCK accounting. However, this function is called after virtio_transport_fill_skb() has already consumed the iterator via __zerocopy_sg_from_iter(), so on the last skb, iter->count will be 0, skipping the RLIMIT_MEMLOCK enforcement. Pass pkt_len (the total bytes being sent) as an explicit parameter to virtio_transport_init_zcopy_skb() instead of reading the already-consumed iter->count. This matches TCP and UDP, which both call msg_zerocopy_realloc() with the original message size. | ||||
| CVE-2026-53001 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific. | ||||
| CVE-2026-53004 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data. | ||||
| CVE-2026-53058 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cadence: cdns-mhdp8546-core: Set the mhdp connector earlier in atomic_enable() In case if we get errors in cdns_mhdp_link_up() or cdns_mhdp_reg_read() in atomic_enable, we will go to cdns_mhdp_modeset_retry_fn() and will hit NULL pointer while trying to access the mutex. We need the connector to be set before that. Unlike in legacy cases with flag !DRM_BRIDGE_ATTACH_NO_CONNECTOR, we do not have connector initialised in bridge_attach(), so add the mhdp->connector_ptr in device structure to handle both cases with DRM_BRIDGE_ATTACH_NO_CONNECTOR and !DRM_BRIDGE_ATTACH_NO_CONNECTOR, set it in atomic_enable() earlier to avoid possible NULL pointer dereference in recovery paths like modeset_retry_fn() with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag set. | ||||
| CVE-2026-53061 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix dirty mapping checking in passthrough mode switching As mentioned in commit 9b1cc9f251af ("dm cache: share cache-metadata object across inactive and active DM tables"), dm-cache assumed table reload occurs after suspension, while LVM's table preload breaks this assumption. The dirty mapping check for passthrough mode was designed around this assumption and is performed during table creation, causing the check to fail with preload while metadata updates are ongoing. This risks loading dirty mappings into passthrough mode, resulting in data loss. Reproduce steps: 1. Create a writeback cache with zero migration_threshold to produce dirty mappings dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writeback smq \ 2 migration_threshold 0" 2. Preload a table in passthrough mode dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" 3. Write to the first cache block to make it dirty fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \ --direct=1 --size=64k 4. Resume the inactive table. Now it's possible to load the dirty block into passthrough mode. dmsetup resume cache Fix by moving the checks to the preresume phase to support table preloading. Also remove the unused function dm_cache_metadata_all_clean. | ||||
| CVE-2026-53062 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted" | ||||
| CVE-2026-6325 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A |
| Out-of-bounds write in SetSuitesHashSigAlgo when processing an oversized signature algorithms list, allowing a write past the bounds of the destination buffer. | ||||
| CVE-2026-13324 | 2026-06-26 | 6.5 Medium | ||
| A vulnerability has been identified in the **GNOME Geary** package within its **`mailto` URI handling** component. This flaw occurs because the email client automatically processes a non-standard `attach` parameter in email links without prompting or alerting the user. An attacker could exploit this by tricking a user into clicking a specially crafted link (for example, `mailto:user@example.com?attach=/path/to/sensitive_file`). When clicked, Geary will automatically open a new compose window with the specified local file already attached. Because there is no dialog box or visual warning indicating that the file was attached by the link rather than the user, the user might unknowingly send sensitive files or data to the attacker upon hitting send. | ||||
| CVE-2026-55698 | 1 Pnpm | 1 Pnpm | 2026-06-26 | 8.8 High |
| pnpm is a package manager. Prior to 10.34.2 and 11.5.3, pnpm can persist package-manager bootstrap metadata in the first YAML document of pnpm-lock.yaml. Before the patch, direct pnpm execution trusted an already resolved packageManagerDependencies entry when the committed env lockfile contained matching pnpm and @pnpm/exe versions. A malicious repository could therefore commit package-manager lockfile package records and snapshots that bypassed fresh package-manager resolution, then cause pnpm to install and execute bytes selected by that committed lockfile state during automatic version switching. This vulnerability is fixed in 10.34.2 and 11.5.3. | ||||
| CVE-2026-55092 | 1 Aquasecurity | 1 Trivy | 2026-06-26 | N/A |
| Trivy is a security scanner. Prior to 0.71.1, when Trivy downloads an OCI artifact, it uses the org.opencontainers.image.title annotation from the artifact manifest as the destination filename without validation. An attacker who can make Trivy fetch an attacker-controlled artifact can supply a crafted annotation that resolves to a path outside the intended destination, causing Trivy to write the layer content to an arbitrary location on the host filesystem. This vulnerability is fixed in 0.71.1. | ||||
| CVE-2026-9799 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2026-06-26 | 4.6 Medium |
| A flaw was found in org.keycloak.authorization. An authenticated user with a granted User-Managed Access (UMA) permission ticket for one resource can exploit this by using a specific permission request prefix to bypass per-resource access control. This allows the user to gain unauthorized access to all resources of that type within the same resource server, even if they do not have a ticket for those specific resources. This vulnerability requires the resource server to be configured in PERMISSIVE policy enforcement mode and affects typed resources with ownerManagedAccess enabled, where no explicit policy protects the resource type. The primary consequence is unauthorized information disclosure or modification of resources. | ||||
| CVE-2026-54030 | 1 Danny-avila | 1 Libre Chat | 2026-06-26 | 8 High |
| LibreChat is an enhanced ChatGPT clone that supports multiple AI providers. Prior to 0.8.5, LibreChat's MCP OAuth implementation does not validate that the resource parameter from OAuth Protected Resource metadata (RFC 9728) matches the configured MCP server URL, allowing a malicious MCP server to steal access tokens intended for a legitimate server. This vulnerability is fixed in 0.8.5. | ||||
| CVE-2026-56123 | 1 Socat | 1 Socat | 2026-06-26 | 8.1 High |
| socat versions 1.8.0.0 through 1.8.1.1 contain a heap-based buffer overflow vulnerability that allows a malicious SOCKS5 proxy server to overwrite adjacent heap memory by exploiting a sign-extension flaw in the DOMAINNAME reply parser. During connection setup, the domain name length byte is read through a signed char field causing a negative bytes_to_read value that is implicitly converted to size_t, resulting in an unbounded heap write into the 262-byte reply buffer with attacker-controlled size and content. | ||||
| CVE-2026-55895 | 1 Vim | 1 Vim | 2026-06-26 | N/A |
| Vim is an open source, command line text editor. Prior to 9.2.0663, a Vimscript code injection vulnerability exists in s:NetrwLocalRmFile() in the netrw plugin (runtime/pack/dist/opt/netrw/autoload/netrw.vim) when deleting a local file from the browser. A filename derived from the buffer's directory listing is interpolated into an Ex command line passed to :execute with only the backslash character escaped, allowing a crafted filename containing a bar (|) to terminate the intended command and execute arbitrary Vimscript, including shell commands via :call system() and :!. This vulnerability is fixed in 9.2.0663. | ||||
| CVE-2026-53049 | 1 Linux | 1 Linux Kernel | 2026-06-26 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: add some missing log locking Function gfs2_logd() calls the log flushing functions gfs2_ail1_start(), gfs2_ail1_wait(), and gfs2_ail1_empty() without holding sdp->sd_log_flush_lock, but these functions require exclusion against concurrent transactions. To fix that, add a non-locking __gfs2_log_flush() function. Then, in gfs2_logd(), take sdp->sd_log_flush_lock before calling the above mentioned log flushing functions and __gfs2_log_flush(). | ||||
| CVE-2026-37149 | 1 Anirudhkannanvp | 1 Grocery Store Management System | 2026-06-26 | N/A |
| GROCERY-STORE-MANAGEMENT-SYSTEM-USING-PHP-AND-MYSQL-PHPMYADMIN v1.0 was discovered to contain a SQL injection vulnerability in the scost parameter in /grocery/search_products.php. This vulnerability allows attackers to access sensitive database information via a crafted SQL statement. | ||||
| CVE-2026-6681 | 1 Wolfssl | 1 Wolfssl | 2026-06-26 | N/A |
| The PKCS#7 decode path ignores the caller-supplied output buffer size (outputSz), allowing decoded content to be written past the bounds of the provided buffer. This affects wolfSSL 5.9.0 and earlier and was fixed in the 5.9.1 release. | ||||
| CVE-2026-8661 | 2026-06-26 | 4.8 Medium | ||
| Server-Side Cross-Site Scripting and Server-Side Request Forgery vulnerability in the markdown_to_pdf action of Rapid7 InsightConnect Markdown Plugin version 3.1.4 and earlier on Linux allows remote attackers to execute JavaScript server-side and make arbitrary outbound HTTP requests via crafted content embedded in Markdown input. The PDF rendering engine does not restrict script execution or outbound network access. | ||||